[Xin giúp] Các bác xem giúp em cái log 1200 khó hiểu

[uyếnhà]

MXKEY [MxKey Team HTI PLUS Flasher Interface 1], SN: C08593E1
Using device: HTI, FW ver: 00.50, SN: 0100BCDF
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0
Module ver: 1.0.0.21151(13-07-2012), Library ver: 1.0.0.14214(25-10-2012)
Rpl backup already exist (C:\mobileEx\3.5\data\backup\35353502363402_BACK.r pl).
Processing MCU file: rh99_05.910
[DCT4,DCT4 ALGORITHM] size: 2.27 MB
Supported Ids: 2292
ASIC ID: 0x2292 [UPPCosto ver: 1.3]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0020 8828 [ST 58WR032FU,32 Mbits] page size: 64 K type: NOR area: 01000000-013FFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: AD7E B61A 1BBE 0BE2 7D58 6BE4 DBEE 6514
Algorithm: u3_st_i.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x4C30
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 009530DC:2984DA60
Area [01000000-0100FFFF] erased in 1.000 s
Area [01010000-013AFFFF] erased in 57.750 s
Area [013B0000-013EFFFF] erased in 3.953 s
Area [017C0000-017EFFFF] erased in 0.016 s
Area [01FC0000-01FEFFFF] erased in 0.031 s
Flash programming ...
Programming completed in 14.328 s
File processed in 1 min 24.141 s
Processing CNT file: rh990_nai5.91mr
[DCT4,DCT4 ALGORITHM] size: 110.59 KB
Supported Ids: 2292
ASIC ID: 0x2292 [UPPCosto ver: 1.3]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0020 8828 [ST 58WR032FU,32 Mbits] page size: 64 K type: NOR area: 01000000-013FFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: AD7E B61A 1BBE 0BE2 7D58 6BE4 DBEE 6514
Algorithm: u3_st_i.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x4C30
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 009530DC:2984DA60
Area [01380000-013AFFFF] erased in 3.000 s
Flash programming ...
Programming completed in 0.735 s
Extracting Content Pack, File Server fake reply for CUI phone.
Content Pack extracted successfully in 0.141 s
File processed in 17.250 s
Processing PPM file: rh99_05.91mr
[DCT4,DCT4 ALGORITHM] size: 1.13 MB
Supported Ids: 2292
ASIC ID: 0x2292 [UPPCosto ver: 1.3]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0020 8828 [ST 58WR032FU,32 Mbits] page size: 64 K type: NOR area: 01000000-013FFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: AD7E B61A 1BBE 0BE2 7D58 6BE4 DBEE 6514
Algorithm: u3_st_i.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x4C30
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 009530DC:2984DA60
Area [01240000-0124FFFF] erased in 0.984 s
Area [01250000-0137FFFF] erased in 18.875 s
Flash programming ...
Programming completed in 7.094 s
File processed in 34.531 s
Total time for flashing process(boot+erase+write) was 2 min 15.922 s


Phone type: RH-99
SW version: V 5.91 27-03-09 RH-99 (c) NMP
Imei plain: 35353502363402-3
Product code: 0546885
Cellular system: GSM
ASIC ID: 0x2292, type: 11
Ppm Id: MR
Language Pack:
- not available.

Master code: 0352633527

Imei net: 35353502363402
Version: SIMLOCK SERVER
Provider: GSM Test Operator
Counter: 0/3, 0/10

CONFIG_DATA: 0010100000000000
PROFILE_BITS: 0000000000010002

BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
FULL FACTORY... OK
USER DATA... OK
LEAVE FACTORY... OK
SERVICE CENTER... OK
SOFTWARE UPGRADE... OK
PRODUCTION TUNING... OK
Reset User Code (to default:12345) ... OK
Completed in 1.516 s
hiện tại máy vẫn ko lên nguồn đã làm lại cpu bác nào gặp rồi xin chỉ giáo thak all

[duykhanh_gsm]

kt xem phím power thế nào

[Hai_GSM_Pro]

Thay 26M đi không được đóng lại ic nguồn

[uyếnhà]

kt xem phím power thế nào

ấn nguồn kim dòng vẫn lên 0.2a đồi về 0

[uyếnhà]

Thay 26M đi không được đóng lại ic nguồn

26M là con thạch anh dung ko bác

[LÊ_TRUNG]

BẤM nguồn máy dao động thế nào hả bác...

[UNICEF]

xem lại mạch màng hỉnh

[LOC_PHAT_ĐAT]

26m là con thạch anh dung ko bác

là con dao đông đó chủ thớt...

[uyếnhà]

là con dao đông đó chủ thớt...

ok đã thành công nhờ mod nào đi qua đóng lại dùm em