x1-01 không nhận cả 2 sim

[quangminh.mobile]

máy bây giờ không nhận cả 2 sim.da làm ic sim cũng không đc.
đây là log
VBATT Powering Down <<<<
VBATT Powering Up >>>>
SET VCCIO Level Done
SET BSI Load Done

Booting Phone...
CPU ID Response: A200341100
CPU Type: XG110 2.1B
Phone Booted at after First attempt...

************************************************** ****
TIME STARTS HERE
************************************************** ****


Sending PBL 19456 bytes...
PBL Successfully Sent...

Sending SBL 65024 bytes...
SBL Successfully Sent...

Flash Chip Manufacturer: Samsung Electronics Corp.
Flash Chip Type: K8S6415ETC 64 Mbit (4Mb x 16) NOR
Extended Information: Multiple Bank / Burst / 1.8v

Processing Image File: C:\Program Files\Nokia\Phoenix\Products\RM-713\rm713_007.500

FIRMWARE Image Found...
Number of Sections: 03
FIRMWARE Certificate Block Sent Successfully...
Processing Section 01 of 03
FIRMWARE Erase Block: 0x00000000~0x0001FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 24576 bytes
Data Checksum: 55FD
Uploading Data Blocks to phone...
FIRMWARE Data Blocks uploaded to phone...
Processing Section 02 of 03
FIRMWARE Erase Block: 0x00800000~0x00BFFFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 4128768 bytes
Data Checksum: AA06
Uploading Data Blocks to phone...
FIRMWARE Data Blocks uploaded to phone...
Processing Section 03 of 03
FIRMWARE Erase Block: 0x00C5D000~0x00E5FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 1697536 bytes
Data Checksum: C1B9
Uploading Data Blocks to phone...
FIRMWARE Data Blocks uploaded to phone...
Start Data Verification... (Please wait)
Data Verification Successful...


Processing Image File: C:\Program Files\Nokia\Phoenix\Products\RM-713\rm713_007.50mr

PPM Image Found...
Number of Sections: 01
PPM Certificate Block Sent Successfully...
Processing Section 01 of 01
PPM Erase Block: 0x00100000~0x006120BE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 5316800 bytes
Data Checksum: 93CE
Uploading Data Blocks to phone...
PPM Data Blocks uploaded to phone...
Start Data Verification... (Please wait)
Data Verification Successful...


Processing Image File: C:\Program Files\Nokia\Phoenix\Products\RM-713\rm7130_nai07.50mr

CONTENT Image Found...
Number of Sections: 01
CONTENT Certificate Block Sent Successfully...
Processing Section 01 of 01
CONTENT Erase Block: 0x00E60000~0x00F0E53E
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 714048 bytes
Data Checksum: 111B
Uploading Data Blocks to phone...
CONTENT Data Blocks uploaded to phone...
Start Data Verification... (Please wait)
Data Verification Successful...


Exit Flash Mode Done...
Time Elapse : 00:04:14

************************************************** ****
You must Factory Reset the phone to enable the
ringtones and other customized settings to work
************************************************** ****


Waiting For Phone to go Online...

5, 4, 3, 2, 1...
MCU: V 07.50 29-11-11 RM-713 (c) Nokia
IMEI: 359765041510863
Product Serial Number: 6F9B1A1AH
Product Code : 059D8Q7
Module Code : 0204727
Basic Production Code: 059L8X6
PPM SW Version : V 07.50 29-11-11 RM-713 (c) Nokia MR
ADSP Version : p V 07.50\n29-11-11\nRM-713\n(c) NMP\nmr
MCU SW Version : V 07.50 29-11-11 RM-713 (c) Nokia
HW Version : 1000
UEM Version : 1328
UPP Version : 8850
LCD Version : TPO:BARACOAv82 HX5081
********** SIMLOCK INFO **********
CONFIG_DATA : 0010100000000000
PROFILE_BITS : 0000000000030002
ASIC : 11
PROVIDER : Default Test Operator

Block [1] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [2] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [3] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [4] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [5] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [6] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [7] 1:Open 2:Open 3:Open 4:Open 5:Open
ST_LCD_TEST : PASSED


FACTORY SET TO : Full Factory Set
OK
FACTORY SET TO : User Data
OK
FACTORY SET TO : Leave Factory
OK
FACTORY SET TO : Service Center
OK
FACTORY SET TO : Software Upgrade
OK
FACTORY SET TO : Production Tune
OK

[ĐẶNG BẢO_GSM™]

Log này đẹp rùi chả ảnh hưởng gì đến k nhận 2 sim cả

Thay 2 con ic sim nhỏ nhỏ trước gần 2 ổ sim
Nếu vẫn not ok thay con ic sim tổng to to 24 chân hình vuông màu đen luôn

[phithanhmobile]

câu dây 2 em ic sim luôn bạn

[chungdaklak]

theo sơ đồ làm thử đi anh bnaj.phàn mềm no

[quangminh.mobile]

em đã tham khảo hình này,vào đã lam theo rui vẫn không đc.

câu dây 2 em ic sim luôn bạn

[vubaotuan]

ko được nưa làm u thôi bạn

[ĐẶNG BẢO_GSM™]

Thay con ic sim tổng 24 chân đi nói thế rùi mà k nghe, bó tay

[tanphongforum]

làm u đi bạn con này dể làm mà

[phithanhmobile]

không được thì khò upp lại không nửa cho em nó lắc luôn

[Lính Khang]

Làm con Dual sim 24 chân đi anh,không được thì khò lắc con U lại,not ok thì tháo ra đóng lại xem sao,cuối cùng là thay cặp thôi.Chúc anh thành công !!!