Mình nhận cây 1616-2 Asic b ma 2 mình unlock hoài không được , có bác nào biết cách giúp em cái Thanks mọi người , đây là log của em nó MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 4], SN: C084B543
Using device: HTI, FW ver: 00.24, SN: 00010AEA
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0
Module ver: 1.0.0.21151(13-07-2012), Library ver: 1.0.0.14214(25-10-2012)
Device synchronized.
CPU: XGOLD 110
Using embedded SBL from MCU.
Sending EBL Loader ...OK
Sending EBL ...OK
Getting EBL Version ...
Boot mode: 0xCC
EBL version major/minor: 10.19
EBL version: Default_RAM_Bootloader
Set baud rate to: 921.60 Kbit/s
Flash ID: 0020 88C0 - 23280003 [ST M58MWR064FU,64 Mbits]
CFI information:
Flash settings: 0/1, size: 0x00800000
2 Block regions:
127 x 0x00010000 = 0x007F0000
8 x 0x00002000 = 0x00010000
EBL ready !
Phone type: RH-125
SW version: V 06.51 13-05-11 RH-125 (c) Nokia
Imei plain: 35904304927858-0
Product code: 0596575
Cellular system: GSM
ASIC ID: 0x2292, type: 11
Ppm Id: MR
Language Pack:
- not available.
Imei net: 35904304927858
Provider: Vodafone Network Pty. Ltd. , Country: Australia
Counter: 0/3, 0/10
CONFIG_DATA: 5050300014981890
PROFILE_BITS: 8000000000030002
BLOCK1: 1=CLOSED(MCCMNC), DATA=50503F [Australia-Vodafone Network Pty. Ltd. ]
Imei net: 35904304927858
Provider: Vodafone Network Pty. Ltd. , Country: Australia
Counter: 0/3, 0/10
CONFIG_DATA: 5050300014981890
PROFILE_BITS: 8000000000030002
BLOCK1: 1=CLOSED(MCCMNC), DATA=50503F [Australia-Vodafone Network Pty. Ltd. ]
Imei net: 35904304927858
Provider: Vodafone Network Pty. Ltd. , Country: Australia
Counter: 0/3, 0/10
CONFIG_DATA: 5050300014981890
PROFILE_BITS: 8000000000030002
BLOCK1: 1=CLOSED(MCCMNC), DATA=50503F [Australia-Vodafone Network Pty. Ltd. ]