[Xin giúp] x2-02 vào camera tự khưởi động lại

[phicong1991]

chào cả nhà,e có cây x2-02 máy sài nghe gọi bình thường ,nhưng vào camera thì khởi đông lại,a e nào đã từng làm con này ,cho e xin chút thông tin,thks

[phithanhmobile]

flash cho nó cái fulfactory nó cía luôn rồi báo lại anh em

[minhtu2326]

thi chay lsi phan mem cho lo di *** the

[thanhhai46]

nạp lại trước ko hết thì kt áp cho cam nhe

[phicong1991]

e nạp flash lại rùi,mà vản not ok mấy a ui, còn cách nào nửa không ,cho e chút ý kiến nửa đi máy a,hoặc có sơ đồ cho e xin luôn thks?
log e no đây:
MXKEY [FT SCR2000 0], SN: C081910C
Using device: USB Phonet
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: nmwcdc, ver: 7.1.32.84
Module ver: 1.0.0.21313(12-12-2012), Library ver: 1.0.0.14337(12-12-2012)
Battery voltage: 4373 mV
Waiting for USB device removal ...
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
Device synchronized.
CPU: XGOLD 213
Using embedded SBL from MCU.
Sending EBL Loader...OK
Sending EBL ...OK
Getting EBL Version ...
Boot mode: 0xCC
EBL version major/minor: 10.46
EBL version: Quantum_Bootloader_10.46_M1S1
Protocol version suggested by phone: 3
Set baud rate to: 6.50 Mbit/s
Flash ID: 0089 8982 - 23280001 [Intel NU48F512,512 Mbits]
CFI information:
Flash settings: 0/1024, size: 0x04000000
1 Block regions:
512 x 0x00020000 = 0x04000000
EBL ready !
Original IMEI: 35196005031868
RPL backup already exist (C:\mobileEx\3.5\data\backup\XGOLD_35196005031868_ back.RPL)
Processing file: rm694__10.91.mcusw
Downloading item CODE:rm694__10.91.mcusw_ebl_psi.fls, num block: 4, size: 26.25 MB
Erasing area 0x40000000-0x4001FFFE ...OK
Programming completed in 0.360 s
Erasing area 0x40040000-0x4005FFFE ...OK
Programming completed in 0.344 s
Erasing area 0x40060000-0x4015FFFE ...OK
Programming completed in 1.375 s
Erasing area 0x40280000-0x41B7FFFE ...OK
Programming completed in 30.704 s
Checksum verified (0x27E3)
Processing file: rm694__10.91.ppm_v
Downloading item CUSTackage_v.ppm_ebl_psi.fls, num block: 1, size: 5.51 MB
Erasing area 0x41C00000-0x42181C72 ...OK
Programming completed in 7.016 s
Checksum verified (0x76E8)
Processing file: rm694__10.91.image_v_059D1W0
Downloading item CUSTackage_v_059D1W0.image.fls, num block: 1, size: 14.25 MB
Erasing area 0x42300000-0x43E1FFFE ...OK
Programming completed in 17.593 s
Checksum verified (0x2887)
Total time for flashing process(boot+erase+write) was 7 min 59.672 s
Waiting for USB device removal ...
Waiting for device boot up ...
Device connected: nmwcdc\Nokia X2-02 USB Phonet, PORT_ID: 37A33633
Verifying communication to device OK.



Phone type: RM-694 (X2-02)
SW version: V 10.91 08-02-12 RM-694 (c) Nokia
Imei plain: 35196005031868-2
Product code: 059D1W0
Battery voltage: 4528 mV, current: 132 mA
Cellular system: GSM
ASIC ID: 0x0000, type: 11
Ppm Id: V
Language Pack:
- not available.

Master code: 3165120514

Imei net: 35196005031868
Version: SIMLOCK SERVER
Provider: GSM Test Operator
Counter: 0/3, 0/10

CONFIG_DATA: 0010100000000000
PROFILE_BITS: 800000000003000B

BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
MXKEY [FT SCR2000 0], SN: C081910C
Using device: USB Phonet
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: nmwcdc, ver: 7.1.32.84
Module ver: 1.0.0.21313(12-12-2012), Library ver: 1.0.0.14337(12-12-2012)
Battery voltage: 4373 mV
Waiting for USB device removal ...
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
Device synchronized.
CPU: XGOLD 213
Using embedded SBL from MCU.
Sending EBL Loader...OK
Sending EBL ...OK
Getting EBL Version ...
Boot mode: 0xCC
EBL version major/minor: 10.46
EBL version: Quantum_Bootloader_10.46_M1S1
Protocol version suggested by phone: 3
Set baud rate to: 6.50 Mbit/s
Flash ID: 0089 8982 - 23280001 [Intel NU48F512,512 Mbits]
CFI information:
Flash settings: 0/1024, size: 0x04000000
1 Block regions:
512 x 0x00020000 = 0x04000000
EBL ready !
Original IMEI: 35196005031868
RPL backup already exist (C:\mobileEx\3.5\data\backup\XGOLD_35196005031868_ back.RPL)
Processing file: rm694__10.91.mcusw
Downloading item CODE:rm694__10.91.mcusw_ebl_psi.fls, num block: 4, size: 26.25 MB
Erasing area 0x40000000-0x4001FFFE ...OK
Programming completed in 0.360 s
Erasing area 0x40040000-0x4005FFFE ...OK
Programming completed in 0.344 s
Erasing area 0x40060000-0x4015FFFE ...OK
Programming completed in 1.375 s
Erasing area 0x40280000-0x41B7FFFE ...OK
Programming completed in 30.704 s
Checksum verified (0x27E3)
Processing file: rm694__10.91.ppm_v
Downloading item CUSTackage_v.ppm_ebl_psi.fls, num block: 1, size: 5.51 MB
Erasing area 0x41C00000-0x42181C72 ...OK
Programming completed in 7.016 s
Checksum verified (0x76E8)
Processing file: rm694__10.91.image_v_059D1W0
Downloading item CUSTackage_v_059D1W0.image.fls, num block: 1, size: 14.25 MB
Erasing area 0x42300000-0x43E1FFFE ...OK
Programming completed in 17.593 s
Checksum verified (0x2887)
Total time for flashing process(boot+erase+write) was 7 min 59.672 s
Waiting for USB device removal ...
Waiting for device boot up ...
Device connected: nmwcdc\Nokia X2-02 USB Phonet, PORT_ID: 37A33633
Verifying communication to device OK.



Phone type: RM-694 (X2-02)
SW version: V 10.91 08-02-12 RM-694 (c) Nokia
Imei plain: 35196005031868-2
Product code: 059D1W0
Battery voltage: 4528 mV, current: 132 mA
Cellular system: GSM
ASIC ID: 0x0000, type: 11
Ppm Id: V
Language Pack:
- not available.

Master code: 3165120514

Imei net: 35196005031868
Version: SIMLOCK SERVER
Provider: GSM Test Operator
Counter: 0/3, 0/10

CONFIG_DATA: 0010100000000000
PROFILE_BITS: 800000000003000B

BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
FULL FACTORY... OK
USER DATA... OK
LEAVE FACTORY... OK
SERVICE CENTER... OK
SOFTWARE UPGRADE... OK
PRODUCTION TUNING... OK
Reset User Code (to default:12345) ... OK
Completed in 0.157 s

[QuangNinhGSM]

bạn cho cái log phần mền lên đây anh em kiểm tra cho