cho hỏi may1650 chạy báo lổi như the này nè

[boykiengiang_kiengiang]

FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-305\rm305_04.510
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-305\rm305_04.51im
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-305\rm3050_nai4.51im
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Backing up PM Field 208 as RPL...
Setting local mode...
Failed! Aborting!
Failed to backup imei...
MCU: C:\Program Files\Nokia\Phoenix\Products\RM-305\rm305_04.510
Booting phone...
Phone didn't answer with TX line low after UEM reset!
Causes:
1. put a 27-33 pico capacitor in connector b/w mbus-gnd.
2. UEM damaged -> replace uem.
MCU ID: 0xDDDD
This MCU ID is not supported in chosen flash file...
Error booting phone...
Backing up PM Field 208 as RPL...
Setting local mode...
Failed! Aborting!
Failed to backup imei...
MCU: C:\Program Files\Nokia\Phoenix\Products\RM-305\rm305_04.510
Booting phone...
Phone didn't answer with TX line low after UEM reset!
Causes:
1. put a 27-33 pico capacitor in connector b/w mbus-gnd.
2. UEM damaged -> replace uem.
MCU ID: 0xDDDD
This MCU ID is not supported in chosen flash file...
Error booting phone...
Backing up PM Field 208 as RPL...
Setting local mode...
Failed! Aborting!
Failed to backup imei...
MCU: C:\Program Files\Nokia\Phoenix\Products\RM-305\rm305_04.510
Booting phone...
Phone didn't answer with TX line low after UEM reset!
Causes:
1. put a 27-33 pico capacitor in connector b/w mbus-gnd.
2. UEM damaged -> replace uem.
MCU ID: 0xDDDD
This MCU ID is not supported in chosen flash file...
Error booting phone...

mông các anh chĩ giùm em

[thienvuong]

hở cabe>>cabe chưa ăn>>tháo cái board đem boot(nếu như máy ok) thì sẽ boot được thui

[ht_mobile]

Causes:
1. put a 27-33 pico capacitor in connector b/w mbus-gnd.
2. UEM damaged -> replace uem.
- Check Cable
- Check Cpu

[boykiengiang_kiengiang]

cáp vẫn con tốt anh oi nhung no boot dươc anh ơi

[ht_mobile]

UEM damaged -> replace uem

[Tri Khang Thinh]

UEM damaged -> replace uem

Đọc tiếng việt 100% mà post lại tòan tiếng anh, sư huynh ơi chơi dữ hén. chơi song ngữ kiễu "song kiếm hợp bích" này hơi khó cho anh em đó.

[boykiengiang_kiengiang]

các anh ơi chĩ giúp giùm thằng em này đi , anh ht_mobile ơi anh có the ghi cựu thễ hơn được ko anh em ko hiễu nó báo nhu thế nào đâu

[thienglong-tv1983]

xài cái bản JAF nhiêu vậy MCU ID is not supported

[TAMTRUONGTELECOM]

1. put a 27-33 pico capacitor in connector b/w mbus-gnd.
2. UEM damaged -> replace uem.
MCU ID: 0xDDDD
This MCU ID is not supported in chosen flash file...
Error booting phone...
Backing up PM Field 208 as RPL...
Setting local mode...
Failed! Aborting!
Failed to backup imei...
MCU: C:\Program Files\Nokia\Phoenix\Products\RM-305\rm305_04.510
Booting phone...
Phone didn't answer with TX line low after UEM reset!
Causes:

bạn làm sao mà ở đoạn này hết báo vầy là ok thôi ( mà máy bị gi?)

[boykiengiang_kiengiang]

em sài bản 1.98.47