x1-01 cần giúp

[quang_gcd]

e có cây x1-01 chạy phần mềm mà không được, nó báo thế này
Backup already exists(C:\mobileEx\3.5\data\backup\XGOLD_RM-713_5B29AC2388688562_IMEI.back)
MXKEY [MxKey Team HTI PLUS Flasher Interface 1], SN: C087278D
Using device: HTI, FW ver: 00.50, SN: 01015035
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0
Module ver: 1.0.0.21719(09-05-2013), Library ver: 1.0.0.14397(09-05-2013)
Device synchronized.
CPU: XGOLD 110
Using embedded SBL from MCU.
Sending EBL Loader ...OK
Sending EBL ...OK
Getting EBL Version ...
Boot mode: 0xCC
EBL version major/minor: 10.24
EBL version: Default_RAM_Bootloader
Set baud rate to: 921.60 Kbit/s
Flash ID: 00EC 2404 - 23280002 [Samsung K5N2833ATM,128 Mbits]
CFI information:
Flash settings: 0/1, size: 0x01000000
2 Block regions:
255 x 0x00010000 = 0x00FF0000
8 x 0x00002000 = 0x00010000
EBL ready !
Processing file: rm713_005.440
Downloading item CODE:hw_b1_rm713_r05.440.fls, num block: 3, size: 5.58 MB
Erasing area 0x00000000-0x00005FFE ...OK
Programming completed in 0.594 s
Erasing area 0x00800000-0x00BEFFFE ...Processing file: rm713_005.44mr
Downloading item CUST:hw_b1_rm713_005.44mr.fls, num block: 1, size: 5.07 MB
flashing terminated !
ace giúp e, chạy cáp ốp lưng hay cáp đa năng j cũng bị. thank ace

[G_man]

chắc cặp có vấn đề rùi tháo ra đóng lại không thay cặp mới = done