+ Trả lời bài viết
Kết quả 1 tới 4 của 4
  1. #1
    Thành viên tích cực baoth06's Avatar
    Ngày tham gia
    Dec 2007
    Bài viết
    404
    Cám ơn !!!
    55
    Thanked 142 Times in 44 Posts

    Mặc định 6230i flash xong mất loa trong, loa ngoài

    mới đầu 2 loa còn nghe được, nhưng nó cứ rẹt rẹt rẹt rẹt , . . . . . .lâu lâu mới nghe đc 1 tiếng. tôi thay con ic chuông n150, ko có kết quả, xoá full nạp lại bây giờ 2 loa hết nghe luôn. Help Me!


    xoá full :
    MCU ID: 0x2051
    Boot is ready...
    Algo is ready...
    Loader is ready...
    Erasing area: 00000000 - 00FFFFFF...
    Done!
    Erasing area: 02000000 - 02FFFFFF...
    Done!
    Erasing area: 04000000 - 04FFFFFF...
    Done!



    FLASH:
    Getting MCU ID

    MCU ID: 0x2051
    FLASH ID0: 22E800EC <=> SAMSUNG (SEC) -> K5G2829ATC Addr0: 0x00000000 - 0x00FFFFFF, SectorSize0: 10
    FLASH ID1: 001000EC <=> SAMSUNG (SEC) -> Type not in database Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 9
    FLASH ID2: 00010000 <=> Flash -> not used Addr2: 0x04000000 - 0x04FFFFFF, SectorSize2: 0
    FLASH ID3: 00010000 <=> Flash -> not used Addr3: 0x06000000 - 0x06FFFFFF, SectorSize3: 0
    First 16 bytes: 00 00 00 00 18 F0 9F E5 18 F0 9F E5 18 F0 9F E5
    Checking RAM for ALGO...
    Algo is ready...
    Checking FAID calculation...
    P-key nokia module version 01.02
    Done!
    Phone Restarted...
    Backup IMEI zone...
    Setting local mode...
    Reading IMEI...
    Reading IMEI data...
    Building RPL backup file...
    C:\Program Files\ODEON\JAF\ProgData\357964001127501_imei_back up_134114.rpl
    Done!
    Getting MCUID...

    MCU ID: 0x2051
    Reading flash chip detailes...
    FLASH ID0: 22E800EC <=> SAMSUNG (SEC) -> K5G2829ATC Addr0: 0x00000000 - 0x00FFFFFF, SectorSize0: 10
    FLASH ID1: 001000EC <=> SAMSUNG (SEC) -> Type not in database Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 9
    FLASH ID2: 00010000 <=> Flash -> not used Addr2: 0x04000000 - 0x04FFFFFF, SectorSize2: 0
    FLASH ID3: 00010000 <=> Flash -> not used Addr3: 0x06000000 - 0x06FFFFFF, SectorSize3: 0
    First 16 bytes: 00 00 00 00 18 F0 9F E5 18 F0 9F E5 18 F0 9F E5

    MCU ID: 0x2051
    Boot is ready...
    Algo is ready...
    Loader is ready...
    Erasing area: 00000000 - 00FFFFFF...
    Done!
    Erasing area: 02000000 - 02FFFFFF...
    Done!
    Erasing area: 04000000 - 04FFFFFF...
    Done!
    FILES SET FOR FLASHING:
    MCU Flash file: NONE
    PPM Flash file: NONE
    CNT Flash file: NONE
    ADSP Flash file: NONE
    APE Variant file: NONE
    APE User Flash file: NONE
    Phone Type:
    FILES SET FOR FLASHING:
    MCU Flash file: C:\Documents and Settings\quang hien\Desktop\rm72_73_11003.620
    PPM Flash file: NONE
    CNT Flash file: NONE
    ADSP Flash file: NONE
    APE Variant file: NONE
    APE User Flash file: NONE
    Phone Type:
    FILES SET FOR FLASHING:
    MCU Flash file: C:\Documents and Settings\quang hien\Desktop\rm72_73_11003.620
    PPM Flash file: C:\Documents and Settings\quang hien\Desktop\rm72_73_110M_03.62v
    CNT Flash file: NONE
    ADSP Flash file: NONE
    APE Variant file: NONE
    APE User Flash file: NONE
    Phone Type:
    FILES SET FOR FLASHING:
    MCU Flash file: C:\Documents and Settings\quang hien\Desktop\rm72_73_11003.620
    PPM Flash file: C:\Documents and Settings\quang hien\Desktop\rm72_73_110M_03.62v
    CNT Flash file: C:\Documents and Settings\quang hien\Desktop\rm72_73_110M_03.62.ucp_v
    ADSP Flash file: NONE
    APE Variant file: NONE
    APE User Flash file: NONE
    MCU: C:\Documents and Settings\quang hien\Desktop\rm72_73_11003.620
    Booting phone...
    MCU ID: 0x2051
    BOOT file: C:\Program Files\ODEON\JAF\Flash\te_2nd.fia
    Loader version: 04.46.01 -> Revision: 0007
    Boot size is 0x2398
    Boot is ready...
    FLASH ID0: 22E800EC <=> SAMSUNG (SEC) -> K5G2829ATC Addr0: 0x00000000 - 0x00FFFFFF, SectorSize0: 10
    FLASH ID1: 001000EC <=> SAMSUNG (SEC) -> Type not in database Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 9
    FLASH ID2: 00010000 <=> Flash -> not used Addr2: 0x04000000 - 0x04FFFFFF, SectorSize2: 0
    FLASH ID3: 00010000 <=> Flash -> not used Addr3: 0x06000000 - 0x06FFFFFF, SectorSize3: 0
    First 16 bytes: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    Flash ID is 0x22E800EC
    Flash loader is C:\Program Files\ODEON\JAF\Flash\te_amd.fia
    Loader version: 04.46.01 -> Revision: 0007
    Loader size is 0x84A0; Loader chk: 4c
    Loader is ready...
    P-key nokia module version 01.02
    MSID: 847EA7AEF910840AC772829A30
    MSID decoded: B03FBAE90035A3D4A9000000
    FAID: 9DB9CC38EFD775A0DB2D87F6
    Operation took 0 minutes 13 seconds...
    Erasing...
    Found 4 interval(s) to erase
    Erasing area: 00000000 - 0000FFFF...
    Erasing area: 00010000 - 009FFFFF...
    Erasing area: 00A00000 - 00B3FFFF...
    Erasing area: 00B60000 - 00FAFFFF...
    Operation took 1 minutes 37 seconds...
    Writing...
    Perm. Data Restore OK
    Operation took 1 minutes 0 seconds...
    Restarting MCU...
    CNT: C:\Documents and Settings\quang hien\Desktop\rm72_73_110M_03.62.ucp_v
    Booting phone...
    MCU ID: 0x2051
    BOOT file: C:\Program Files\ODEON\JAF\Flash\te_2nd.fia
    Loader version: 04.46.01 -> Revision: 0007
    Boot size is 0x2398
    Boot is ready...
    FLASH ID0: 22E800EC <=> SAMSUNG (SEC) -> K5G2829ATC Addr0: 0x00000000 - 0x00FFFFFF, SectorSize0: 10
    FLASH ID1: 001000EC <=> SAMSUNG (SEC) -> Type not in database Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 9
    FLASH ID2: 00010000 <=> Flash -> not used Addr2: 0x04000000 - 0x04FFFFFF, SectorSize2: 0
    FLASH ID3: 00010000 <=> Flash -> not used Addr3: 0x06000000 - 0x06FFFFFF, SectorSize3: 0
    First 16 bytes: 00 00 00 00 18 F0 9F E5 18 F0 9F E5 18 F0 9F E5
    Flash ID is 0x22E800EC
    Flash loader is C:\Program Files\ODEON\JAF\Flash\te_oncsm.fia
    Loader version: 04.46.01 -> Revision: 0007
    Loader size is 0x5648; Loader chk: 7b
    Loader is ready...
    Operation took 0 minutes 10 seconds...
    Erasing Content Pack...
    Mass Memory Device Detected...
    MM Bus Configured...
    Formating MM...Format OK
    Mass Memory Opened...
    Mass Memory Erased...
    Operation took 0 minutes 2 seconds...
    Writing...
    Operation took 0 minutes 33 seconds...
    Restarting MCU...
    Operation took 0 minutes 0 seconds...
    Extracting Content Pack...
    Running: (c) Nokia File Server
    CNT Extract OK.
    Operation took 0 minutes 15 seconds...
    PPM: C:\Documents and Settings\quang hien\Desktop\rm72_73_110M_03.62v
    Booting phone...
    MCU ID: 0x2051
    BOOT file: C:\Program Files\ODEON\JAF\Flash\te_2nd.fia
    Loader version: 04.46.01 -> Revision: 0007
    Boot size is 0x2398
    Boot is ready...
    FLASH ID0: 22E800EC <=> SAMSUNG (SEC) -> K5G2829ATC Addr0: 0x00000000 - 0x00FFFFFF, SectorSize0: 10
    FLASH ID1: 001000EC <=> SAMSUNG (SEC) -> Type not in database Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 9
    FLASH ID2: 00010000 <=> Flash -> not used Addr2: 0x04000000 - 0x04FFFFFF, SectorSize2: 0
    FLASH ID3: 00010000 <=> Flash -> not used Addr3: 0x06000000 - 0x06FFFFFF, SectorSize3: 0
    First 16 bytes: 00 00 00 00 18 F0 9F E5 18 F0 9F E5 18 F0 9F E5
    Flash ID is 0x22E800EC
    Flash loader is C:\Program Files\ODEON\JAF\Flash\te_oncsm.fia
    Loader version: 04.46.01 -> Revision: 0007
    Loader size is 0x5648; Loader chk: 7b
    Loader is ready...
    Operation took 0 minutes 10 seconds...
    Erasing PPM...
    Mass Memory Device Detected...
    MM Bus Configured...
    Mass Memory Opened...
    Mass Memory Erased...
    Operation took 0 minutes 1 seconds...
    Writing...
    Operation took 0 minutes 43 seconds...
    Restarting MCU...
    Flashing Done!
    Operation took 4 minutes 53 seconds...

    After flash processing...
    Waiting for phone to boot...
    Reading...
    Phone type: RM-72, Software version: 03.62
    IMEI: 357964001127501
    Product Code:
    Resetting PPC...
    Done!



    unclock :
    Powering the phone...
    Unlocking...
    IMEI: 357964001127501
    ASIC: 6
    SW version: 03.62
    Checking locks...

    Block 1:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 2:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 3:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 4:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 5:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 6:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 7:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN

    Done!
    DCT4 unlock counter: 28
    AE giúp với ! thank
    Chuyển hệ , mở mạng , sữa chữa đều không rành .
    Cài pan , phá máy , lượm xiền thì OK :D

  2. #2
    V.I.P HUE_GSM's Avatar
    Ngày tham gia
    Mar 2008
    Địa điểm
    Đến từ Huế city.
    Bài viết
    1,947
    Cám ơn !!!
    95
    Thanked 761 Times in 380 Posts

    Mặc định

    Nhìn log thấy không có lỗi gì cã,nguyên nhân là do bạn đóng ic chuông không chuẩn.bạn tìm ic chuẩn đóng vào .chúc thành công.

  3. #3
    Thành viên kỳ cựu chieuNK's Avatar
    Ngày tham gia
    May 2008
    Bài viết
    1,027
    Cám ơn !!!
    6
    Thanked 36 Times in 36 Posts

    Mặc định

    thay ic chuông đi bạn nhe

  4. #4
    quocchuong566
    Guest quocchuong566's Avatar

    Mặc định

    mình nhớ là ic chuông và loa trong là 2 pan khác nhau mà

+ Trả lời bài viết

Thread Information

Users Browsing this Thread

Hiện có 1 người đang xem bài này . Bao gồm : 0 thành viên và 1 khách

     

Similar Threads

  1. 6230i loa ngoài nghe nhỏ xíu
    By pham van nam in forum DCT4 - WD2
    Trả lời: 19
    Bài viết cuối: 04-10-2012, 20:18
  2. 6230i mất loa ngoài !!!
    By mobile69 in forum DCT4 - WD2
    Trả lời: 3
    Bài viết cuối: 27-09-2012, 10:59
  3. 6230i mất loa ngoài
    By huynhcuongdt2009 in forum DCT4 - WD2
    Trả lời: 4
    Bài viết cuối: 14-11-2010, 11:12
  4. 6230i nạp xong bị contact service!
    By quochung_1980 in forum DCT4 - WD2
    Trả lời: 32
    Bài viết cuối: 09-12-2009, 10:23
  5. Trả lời: 5
    Bài viết cuối: 20-11-2009, 18:48

Quyền viết bài

  • Bạn không thể tạo chủ đề mới
  • Bạn không thể gửi trả lời
  • Bạn không thể gửi đính kèm
  • Bạn không thể sửa bài viết của bạn
Lên đầu trang
thiet bi sua chua slim sim, heicard, sim ghep Firmware android giải pháp nhà thông minh