MCU Flash file: H:\Program Files\Nokia\Phoenix\products\NPL-2\npl2__06.010
PPM Flash file: NONE
CNT Flash file: H:\Program Files\Nokia\Phoenix\products\NPL-2\npl2__06.01.ucp_mc1
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: H:\Program Files\Nokia\Phoenix\products\NPL-2\npl2__06.010
PPM Flash file: H:\Program Files\Nokia\Phoenix\products\NPL-2\npl2__06.01t
CNT Flash file: H:\Program Files\Nokia\Phoenix\products\NPL-2\npl2__06.01.ucp_mc1
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
MCU: H:\Program Files\Nokia\Phoenix\products\NPL-2\npl2__06.010
Booting phone...
Phone didn't answer with TX line high after power on!
Causes:
1. Phone don't power on -> Check cable
2. TX pin from phone don't make contact -> Check cable
3. UPP damaged -> change UPP
MCU ID: 0xAAAA
This MCU ID is not supported in chosen flash file...
Error booting phone...
MCU: H:\Program Files\Nokia\Phoenix\products\NPL-2\npl2__06.010
Booting phone...
MCU ID: 0x1120
BOOT file: H:\Program Files\ODEON\JAF\Flash\u_2nd.fia
Loader version: 04.2F.02 -> Revision: 0007
Boot size is 0x0960
Boot is ready...
FLASH ID0: 0001277E -> AMD Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 10
First 16 bytes: A8 7E B6 1A 1B BE 0B E2 7D 58 6B E4 DB EE 65 14
Flash ID is 0x7E270100
Flash loader is H:\Program Files\ODEON\JAF\Flash\u_amd.fia
Loader version: 04.2F.02 -> Revision: 0007
Loader size is 0x6330; Loader chk: f3
Loader is ready...
Sending auth frame 72...
MSID: 844F2EEC9E932289E67A639BC0
MSID decoded: DC74BAE90080454BA8000000
FAID: C05CC22D1993E06D0BCEE913
Operation took 0 minutes 7 seconds...
Erasing...
Found 4 interval(s) to erase
Erasing area: 01000000 - 0100FFFF...
Erasing area: 01010000 - 0157FFFF...
Erasing area: 016B0000 - 017EFFFF...
Erasing area: 01EB0000 - 01FEFFFF...
Operation took 0 minutes 48 seconds...
Writing...
Error cmd: 14!
Addr: 01040000You may try to put a 27-33 pico capacitor b/w mbus-gnd in cable