[Xin giúp] 1202 conta sevice

[meocon_bmt89]

đưa vào mx key unclock là ok liền

[quangdai2007]

em có cây 1202 khi khởi động thì kim dòng lên khoang 0.5v . chạy phần mềm thì không báo lỗi , nhưng MH không lên gì cả . nhờ các anh giúp đỡ !!!
em chạy xong nó báo thế này :
Using device: UFS_USB V2.8 (c) SarasSoft 2007.
Library version: 1.0.0.8929(24-06-2010), 1.0.0.14574(24-06-2010)
ASIC ID: 0x2293 [UPPCosto ver: 2.0]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0020 8828 [ST 58WR032FU,32 Mbits] page size: 64 K type: NOR area: 01000000-013FFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: AD7E B61A 2310 0340 C605 E401 20A2 6514
Algorithm: u3_st_i.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x4C30
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 005BF239: DA3BDA66
ASIC type: 11
UEM Imei: 35422103122183
Processing file: rh112_003.100 as MCU
[DCT4,DCT4 ALGORITHM] size: 2.29 MB
Supported Ids: 2293
ASIC ID: 0x2293 [UPPCosto ver: 2.0]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0020 8828 [ST 58WR032FU,32 Mbits] page size: 64 K type: NOR area: 01000000-013FFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: AD7E B61A 2310 0340 C605 E401 20A2 6514
Algorithm: u3_st_i.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x4C30
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 005BF239:2984DA60
Area [01000000-0100FFFF] erased in 1.453 s
Area [01010000-013AFFFF] erased in 1 min 4.250 s
Area [013B0000-013EFFFF] erased in 4.516 s
Area [017C0000-017EFFFF] erased in 0.172 s
Area [01FC0000-01FEFFFF] erased in 0.172 s
Flash programming ...
Programming completed in 17.109 s
File Processed in 1 min 36.047 s
Processing file: rh1120_nai03.10mr as CNT
[DCT4,DCT4 ALGORITHM] size: 110.44 KB
Supported Ids: 2293
ASIC ID: 0x2293 [UPPCosto ver: 2.0]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0020 8828 [ST 58WR032FU,32 Mbits] page size: 64 K type: NOR area: 01000000-013FFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: AD7E B61A 2310 0340 C605 E401 20A2 6514
Algorithm: u3_st_i.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x4C30
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 005BF239:2984DA60
Area [01380000-013AFFFF] erased in 3.438 s
Flash programming ...
Programming completed in 0.890 s
Extracting Content Pack, File Server fake reply for CUI phone.
Content Pack extracted successfully in 0.172 s
File Processed in 19.438 s
Processing file: rh112_003.10mr as PPM
[DCT4,DCT4 ALGORITHM] size: 1.15 MB
Supported Ids: 2293
ASIC ID: 0x2293 [UPPCosto ver: 2.0]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0020 8828 [ST 58WR032FU,32 Mbits] page size: 64 K type: NOR area: 01000000-013FFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: AD7E B61A 2310 0340 C605 E401 20A2 6514
Algorithm: u3_st_i.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x4C30
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 005BF239:2984DA60
Area [01240000-0124FFFF] erased in 1.141 s
Area [01250000-0137FFFF] erased in 20.906 s
Flash programming ...
Programming completed in 8.718 s
File Processed in 41.688 s
Flashing completed in 3 min 14.625 s

Phone Type: RH-112
SW Version: V 03.10 21-01-09 RH-112 (c) NMP
Imei plain: 35422103122183-5
Product Code: 0562324
Cellular System: GSM
ASIC ID: 0x2293, type: 11
Ppm Id: MR
Language Pack:
- not available.


Imei net: 35422103122183
Version: SIMLOCK SERVER
Provider: ALL Operator, Country: -
Counter: 0/3, 0/10

CONFIG_DATA: 0010100000000000
PROFILE_BITS: 000000000003000B

BLOCK 1: 1.OPEN 2.OPEN 3.OPEN 4.OPEN 5.OPEN
BLOCK 2: 1.OPEN 2.OPEN 3.OPEN 4.OPEN 5.OPEN
BLOCK 3: 1.OPEN 2.OPEN 3.OPEN 4.OPEN 5.OPEN
BLOCK 4: 1.OPEN 2.OPEN 3.OPEN 4.OPEN 5.OPEN
BLOCK 5: 1.OPEN 2.OPEN 3.OPEN 4.OPEN 5.OPEN
BLOCK 6: 1.OPEN 2.OPEN 3.OPEN 4.OPEN 5.OPEN
BLOCK 7: 1.OPEN 2.OPEN 3.OPEN 4.OPEN 5.OPEN
Total time to process is 3 min 19.625 s

em nghe khách nói là có lúc khởi động mays chạy ok hết . anh em giúp dùm em!!! Thanks .