AE xem hộ cái log 1208.bị contac

[tvb212]

MCU ID: 0x2292
FLASH ID0: 88280020 <=> ST -> Type not in database Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 10
FLASH ID1: 00010000 <=> Flash -> not used Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 0
First 16 bytes: AD 7E B6 1A 1B BE 0B E2 7D 58 6B E4 DB EE 65 14
Checking RAM for ALGO...
Algo is ready...
Checking FAID calculation...
P-key nokia module version 01.02
Done!
Phone Restarted...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Switching to serial...
Powering the phone...
Reading...
MCU SW version: V 5.23
10-03-08
RH-105
(c) NMP
HW version: 1600
PCI version:
UEM version: 1328
UPP version: 8850
RFIC version: 0700
DSP version: P06w45.v47
LCD version: TPO:NAXv80
LDS184
PPM version: V 5.23
10-03-08
RH-105
(c) NMP
MR
ADSP SW version: V 5.23\n10-03-08\nRH-105\n(c) NMP\nmr
Production serial number: DBM578929
Product code: 0550577
Module code: 0203484
Basic production code: 0515534
Flash code:
Order number:
Product specific data:
Long production SN:
ATO:
Default SN type:
IMEI plain: 354868024808760
IMEI spare to net: 3A 45 68 08 42 08 78 06
IMEI SV to net: 33 45 68 08 42 08 78 56 F4
Master Code: 3615426212
Failed reading simlock data...
Phone type: RH-105, Software version: 5.23, Language Pack: MR
User code: ÿ#


Searching for saved ini...
Checking for file C:\Program Files\ODEON\JAF\JAF_RH-105.ini
Saved INI not found, loading INI list...
Setting local mode...
Reading product code...
Product Code: 0550577
Checking path: C:\Program Files\Nokia\Phoenix\Products\RH-105\

Searching for default location of ini...
Checking path: \Products\RH-105\
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RH-105\
No ini files found...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Powering the phone...
Unlocking...
IMEI: 354868024808760
ASIC: b
SW version: 5.23
Selected flash file: D:\File Nokia\File Nokia\1208 RH-105_5.23\rh105_05.230
Decrypting flash...
Encrypting....
CHK Patch found - Unlock Patch found and are not in same block
Patch status: 01

MCU ID: 0x2292
Algo is ready...
P-key nokia module version 01.02
Erasing area: 01140000 - 0115FFFF...
Unlocking...
Checking locks...

Block 1:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 2:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 3:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 4:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 5:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 6:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 7:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN


MCU ID: 0x2292
Algo is ready...
P-key nokia module version 01.02
Erasing area: 01140000 - 0115FFFF...
Done!
DCT4 unlock counter: 8

[tuyetnhi_2007]

anh dùng mxkey check mới dể phát hiện ra dc là HW hay FW chứ log jaf nhìn thấy đẹp rồi ,,, anh thử tes màng dây nguồn thử xem, nếu vẩn CS thì anh dùng mxkey unlock cái thữ xem sao anh ạ chúc anh thành công

[tvb212]

lỗi này là lỗi gì nhỉ ae ?

Failed reading simlock data...

[DuyQNgãi]

cho vào mkey unlock đi anh , chưa unlock sim log

[nhanvnn]

bây giờ bạn xóa full rồi flash lại + write pm full + unlock, bạn nên IU setting = HWK thì tốt hơn. nếu vẫn ko đựoc kiểm tra lại màn hình, cáp, BSI

[tlpmobile_tk]

mang qua mxkey unlock cho em nó cái.nếu không được thì quang cái log mx lên cho ae chiêm ngưỡng nha bạn chúc vui

[trimobile09]

contac thì chạy las .thay màng hình .kiem tra cpu,.....chút thàn công

[tvb212]

đã ok! uplate simlock Mxkey .

[DuyQNgãi]

đã ok! uplate simlock Mxkey .

chúc mừng bạn