may may info dc nhung khi flash thi bao loi

[tranquocthangts]

AF version 1.98.62
Detected PKEY: 90009F13
Card life counter: 99.99%
P-key nokia module version 01.02
FBUS INTERFACE NOT CONNECTED!!!
USB Cable Driver version: 7.1.36.0
Changing mode...Done!
Searching for phone...Detected P-KEY: 90009F13
P-key nokia module version 01.02
Init usb communication...
Found
MCU SW version: V 03.83
18-06-07
RM-243
(c) Nokia
HW version: 0602
PCI version:
RFIC version:  17141714
DSP version: pb06w41v34.3_rm243
APE SW Core version: 03.83
APE Variant version: Vr Vietnam
01-12-06
RM-243
APE Test version: rm243_ENO_x_2007wk24v0.01
Retu version: 15
Tahvo version: 22
APE HW version: 256
APE ADSP SW version: 256
APE BT version: HCI Version 8 (rev. 0). LMP Version 32 (rev. 4127). Manufacturer 13064.
Production serial number: M7H150424
Product code: 0547593
Module code:
Basic production code: 0539292
Flash code:
Order number:
Product specific data:
Long production SN: 0
ATO:
Default SN type:
IMEI plain: 356255014687099
IMEI spare to net: 3A 65 52 05 41 86 07 09
IMEI SV to net: 33 65 52 05 41 86 07 19 F7

LOCK STATUS:

CONFIG KEY: 2440700000000000
Provider: AT&T;U.S.A. (3650)
Key Code count: 0, FBUS Code count: 0

Block 1:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 2:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 3:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 4:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 5:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 6:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 7:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN

Loading INI list...
Detected P-KEY: 90009F13
P-key nokia module version 01.02
Init usb communication...
Reading product code...
Product Code: 0547593
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-243\

Searching for default location of ini...
Checking path: \Products\RM-243\
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-243\
Scanning ini files...
Searching for default location of ini...
Checking path: \Products\RM-243\
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-243\
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-243\rm243_06.01_prd_core.fpsx
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-243\rm243_06.01_prd_vB16_01_vietnam.fpsx
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-243\rm243_06.01_prd_UDA_Nokia_Noir.fpsx
APE Variant file: NONE
Languages in ppm: English,Thailand,Vietnamese
Done!
Backing up CRT...
Detected P-KEY: 90009F13
P-key nokia module version 01.02
Init usb communication...
Reading IMEI...
C:\Program Files\ODEON\JAF\ProgData\356255014687099_CRT_backu p_197202.pm
Done!
Backup CRT OK!
Detected P-KEY: 90009F13
P-key nokia module version 01.02
Init usb communication...
Searching for phone...Found
Reading SW version...03.83 03.83
Reading battery value...3848 mV
Init usb flashing...
Reading flashid...
CMT: 003000EC <=> SAMSUNG (SEC) -> K5W1G13ACB
APE: 00000000 <=> Flash -> not detected
Verifing ADL communication... Status byte 7
Rebooting to flash mode...
Waiting for the phone to reboot...
Searching for phone...
Phone rebooted but not in flash mode...


nho anh em chỉ giúp giùm

[phamhuy@_mobile]

pác thử kiểm tra đường BSI xem sao ????

[nhanvnn]

chạy ver 7.10 đi anh bạn.

[tranquocthangts]

nhưnng mà máy nào cũng vậy. vi mình chạy bằng cổng usb. chạy 3110c cũng báo vậy. ko biết sao nữa . nhờ ae chỉ giùm

[minhung334]

đánh dấu vào chữ dead usb rồi chạy lại thử xem