Video hướng dẫn chạy mcn-pro

[saigonmobile]

McnPro - Pinouts Detection Procedure - A Quick Scan Guide

----------------------
Quick scan RX ,TX
----------------------

- Txd Rxd Gnd and Api(sky cpu) Pinout Scan
- Supports MTK TI ADI INF SKY AGE OM SPD...
- Takes just a few seconds


Step by Step:

* Connect McnPro to computer and open the main software
* Connect the phone with the right cable via USB etc.
* Use our special cable to connect phone to Negative / Positive, Box can automatic identification and that already have Protection System, so don't worry about the polarity.
* Press [Scan Rx Tx]
* If you already know the based cpu in phone, just select the related one (will be fast), otherwise select "Auto" (will take a few more seconds than usuall)
* Hold power-on button of your phone and press start button on the software interface , in just a few second you will get results ,eg.
Quote:
Scanning results:
GND: 12 13 ,RXD 10, TXD 15
Quote:
Scanning results:
Spd chipset
GND: 12 13 ,RXD 10, TXD 15, Boot:6
Quote:
API Scanning results:
API Pin 4-5
* You can save the scan results , because you might need that for the flash process
* BTW, for SKY cpu it's a little be different, Api can be detected and phone can be Reset. IMEI can be change too. (plz follow the window step by step procedure, its very easy.) eg.
Quote:
Scanning results:
SKY chipset
GND: 12 13 ,RXD 10, TXD 15
Scanning API pin(Please waiting...)
>>.......
API Scanning results:
API pin 5-6
Quote:
....
Connect ok
Modify imei...
Modify successful !


----------------------
USB Scan
----------------------

- Charge / Boot pin ,USBD+/-
- Supports MTK TI ADI INF SKY AGE OM SPD...
- Will take more seconds than above step


Step by Step:

* Connect McnPro to computer and open the main software
* Connect the phone with the right cable via USB etc.
* Use our special cable to connect phone to Negative / Positive, Box can automatic identification and that already have Protection System, so don't worry about the polarity.
* Press [USB Scan]
* In select option choose the same cable which you used, Eg. Mcnpro-11
* Hold power-on of your phone and press [Read starts] button on the software interface .eg.
Quote:
...
Scanning pin-status, please waiting..
->...............................
9,10 short-pin
>>Pin-status scanning completed
* Press [Charge-pin] button Box will be start to analyzing ,then follow the window step by step to do the procedure.when computer find a new USB device which mean's all step done. eg.

Quote:
...
USB D-:8 USB D+: 7 VCC:1 GND: 6 11
...
If scan other phone ,please press [stop]

[saigonmobile]

1 - Connect your McnPro Box, then connect the right cable. Select Boot Version (Applies to some phones), Press Scan, then Select CPU Type and Start.



2 - Pinouts are Automatically Detected & Applied by McnPro Software.




3 - Press the Unlock Button & wait. CPU Type is detected then Unlock Code is Read.




Enjoy McnPro's Easy to use software, with best Support.

[saigonmobile]

Cutomer report if Phone without USB connector how to flash /unlock with Mcnpro box .

Here is the step :

1. Don't need to open phone , just check the T/P on the phone , normal beside the SIM card holder or under ticket .

2. Use universal Fbus cable (Nokia) or direct solder the cable on the T/P detect the PINOUT...

( If via universal Fbus cable you need use the service RJ45 Port )

3. Usually those kindly phone have 4 or 5 TP.

4. Select the related cable ,eg. C5T...

5. Then you can doing the things which you wanted .


Enjoy


Logs for phone AUX M822 :

Code:

Please Hold "ON" to connect with the phone...
Connected to Phone.
CPU：6205 Ver: 8B00 SW:8B00
CPU ID：
Downloading Boot...
Nor Flash Type: [SPANSION] S71GL032R4B
Nor Flash Code: 0001227E(221A2200)
Nor Flash Size: 0x00400000 Hex Bytes
INT/EXT RAM Size: 0x00008000+0x00100000
Verifying Baud...
Set Baud:921600 OK.
Reading(Nor)...
Read OK.
>>total： 3 mins17 s

Good Luck !

[saigonmobile]

I.Instalation main software McnPro Box

1.Double click on the setup Mcnpro to start the installation 2.7.6a for main software box MCNpro.For update installer McnPro Box just visit here



2.Click Next to continue the installation process



3.in *******r Information, please insert the activation code same with listed in the your MCNprobox


4.In select Installation Folder just click Next To instal in this Folder



5.Click Instal for begin installation main software McnPro Box


6.Please waiting process and then click Finish for the end of installation

[saigonmobile]

II.Connect the McnPro Box with Computer

1.First, plug in the cable adapter included in the package to McnPro Box



2.Then plug the USB cable to McnPro Box


3.Also then press the red button to the box to turn on mode


4.search drivers in address location C: \ Program Files \ Mcnbox team \ Mcnpro box \ Drivers \ Box drivers and then click OK


5.Just Wait for Instalation driver untill finish

[saigonmobile]

III.How to Flashing via McnPro Box

1.Plug the cable Flash to the Service Cable into McnProBox



2.Please insert cable Flash into the phone and the box


3.Connect the cable power into the phone as the correctly one



4.Double-click icon Mcnpro Box to start run the program


5.Click connect to see the connection box and computer


6.When see some a notification message box connected, that box
and computer already connected well


7.Select RX option, TX scan to see the pins and type CPU


8.In menu Select Chip, select ALL and then click Start to automatically detected type of CPU used by the mobile phone.


9. Scan messages result shows CPU Chipset MTK MT6225 ...
indicates the phone CPU type is MTK.


10.If the pin flash cable being used is detected as well, Then the cable type selected Flash is correct, just klik Apply to continue

[saigonmobile]

11.Click Open to choose the firmware




12.Get the firmware as the correctly one's




13.click flash to start run the flashing process


14.Please try to shocked on the phone


15.Just waiting process flashing untill finish


16.Till there's some a notification message appear Write OK!


17.Just Click unlock for finishing

[at mobile]

tools này nhìn la lá giống sipiderman nhỉ admin.

[GIALAI_GSM]

admin ơi box này bán bao nhiêu vậy nhìn cáp giúng spidmen quá

[UNLOCKDTDD]

admin ơi box này bán bao nhiêu vậy nhìn cáp giúng spidmen quá

chắc gần 4 chai qua