-
Medusa Box v.2.4.0 - more LG devices added for USB repair!
http://www.gsmserver.com/nfs/content/6149/file/cap.png
Medusa Box v.2.4.0 is out!
We have added boot repair via USB and small TP for:
LG D320, D320F, D320N, D380, D385, MS323,
which are detected by PC as "Qualcomm HS-USB QDloader 9008" device!
Also added repair via JTAG interface for:
LG C410, ZTE Z993, Samsung GT-B6520!
Medusa Box v.2.4.0 Release Notes:
- Added support for the following models:
- LG D320 - added Dead Boot Repair via USB
- LG D320F - added Dead Boot Repair via USB
- LG D320N - added Dead Boot Repair via USB
- LG D380 - added Dead Boot / Device Repair via USB
- LG D385 - added Dead Boot Repair via USB
- LG MS323 - added Dead Boot Repair via USB
- LG C410 - added Dead Boot / Device Repair
- ZTE Z993 - added Dead Boot Repair (thanks to Mr. Dr_Wolodya)
- Samsung GT-B6520 - added Dead Boot Repair (thanks to Mr. Dr_Wolodya)
- All pinouts and Repair procedures are described in the manual ("Help" button in Software).
To repair mentioned above devices via USB, please follow the next three steps:
- Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
(do NOT use any USB hubs!)
- Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
Drivers are in {Installation_Folder}\Driver\QHSUSB
- Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)
http://gsmserver.com/nfs/content/614.../plus_line.png
https://www.youtube.com/watch?v=hRG9NEUip_E
http://gsmserver.com/nfs/content/614.../plus_line.png
Medusa - Ultimate Breakthrough in the Phone Repair!
Download Medusa Box v.2.4.0
-
http://www.gsmserver.com/nfs/content/6149/file/cap.pngMedusa Box v.2.4.1 is out!
We have added boot repair via USB and small TP for:
LG D370, D370TR, D373, D373EU, D375, D410, D410H, D410HN,
which are detected by PC as "Qualcomm HS-USB QDloader 9008" device!
Also added repair via JTAG interface for:
Huawei G510-0010 and Y301-A1 (MetroPCS)!
Medusa Box v.2.4.1 Release Notes:
- Added support for the following models:
- LG D370 - added Dead Boot Repair via USB
- LG D370TR - added Dead Boot Repair via USB
- LG D373 - added Dead Boot Repair via USB
- LG D373EU - added Dead Boot Repair via USB
- LG D375 - added Dead Boot Repair via USB
- LG D410 - added Dead Boot / Device Repair
- LG D410H - added Dead Boot Repair
- LG D410NH - added Dead Boot Repair
- Huawei G510-0010 - added Dead Boot Repair (thanks to Mr. Dr_Wolodya)
- Huawei Y301-A1 (MetroPCS) - added Dead Boot Repair (thanks to Mr. Dr_Wolodya)
- All pinouts and Repair procedures are described in the manual ("Help" button in Software).
To repair mentioned above devices via USB, please follow the next three steps:
- Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
(do NOT use any USB hubs!)
- Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
Drivers are in {Installation_Folder}\Driver\QHSUSB
- Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)
Medusa - Ultimate Breakthrough in the Phone Repair!
[YOUTUBEHD]kFkt8F_mjIY[/YOUTUBEHD]
Download Medusa Box v.2.4.1
-
http://www.gsmserver.com/nfs/content/6149/file/cap.pngMedusa Box v.2.4.2 is out!
We have added boot repair via USB and small TP for:
LG D170, D175F, D180F, D400H, D400HN, D405, D405H, D405N, D405TR, D415, D724,
which are detected by PC as "Qualcomm HS-USB QDloader 9008" device!
Medusa Box v.2.4.2 Release Notes:
- Added support for the following models:
- LG D170 - added Dead Boot / Device Repair via USB
- LG D175F - added Dead Boot Repair via USB
- LG D180F - added Dead Boot Repair via USB
- LG D400H - added Dead Boot Repair via USB
- LG D400HN - added Dead Boot Repair via USB
- LG D405 - added Dead Boot Repair via USB
- LG D405H - added Dead Boot Repair via USB
- LG D405N - added Dead Boot Repair via USB
- LG D405TR - added Dead Boot Repair via USB
- LG D415 - added Dead Boot Repair via USB
- LG D724 - added Dead Boot / Device Repair via USB
- All pinouts and Repair procedures are described in the manual ("Help" button in Software).
To repair mentioned above devices via USB, please follow the next three steps:
- Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
(do NOT use any USB hubs!)
- Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
Drivers are in {Installation_Folder}\Driver\QHSUSB
- Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)
[YOUTUBEHD]zF9XMnpjveA[/YOUTUBEHD]
[YOUTUBEHD]lbqgFy4fbS0[/YOUTUBEHD]
Medusa - Ultimate Breakthrough in the Phone Repair!
Download Medusa Box v.2.4.2
-
http://gsmserver.com/nfs/mail-templa..._medusa_en.pngMedusa Box v.2.4.3 is out!
We have added boot repair via USB and small TP for:
LG E980, E980H, LG E985T, E986, LG E988, LG E989,
which are detected by PC as "Qualcomm HS-USB QDloader 9008" device!
Also added repair via JTAG interface for:
Gigabyte GSmart G1317D
Medusa Box v.2.4.3 Release Notes:
- Added support for the following models:
- LG E980 - added Dead Boot / Device Repair via USB
- LG E980H - added Dead Boot Repair via USB
- LG E985T - added Dead Boot Repair via USB
- LG E986 - added Dead Boot Repair via USB
- LG E988 - added Dead Boot Repair via USB
- LG E989 - added Dead Boot Repair via USB
- Gigabyte GSmart G1317D - added Dead Boot Repair (thanks to Mr. Dr_Wolodya).
- All pinouts and Repair procedures are described in the manual ("Help" button in Software).
To repair mentioned above devices via USB, please follow the next three steps:
- Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
(do NOT use any USB hubs!)
- Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
Drivers are in {Installation_Folder}\Driver\QHSUSB
- Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)
http://gsmserver.com/nfs/content/614.../plus_line.png
[YOUTUBEHD]v2gNk5Yoilc[/YOUTUBEHD]
http://gsmserver.com/nfs/content/614.../plus_line.png
Medusa - Ultimate Breakthrough in the Phone Repair!
Download Medusa Box v.2.4.3
-
http://www.gsmserver.com/nfs/content/6149/file/cap.png
Medusa Box v.2.4.4 is out!
We have added boot repair via USB and small TP for:
LG D150, D157F, D160, D160F, D160G, which are detected by PC as "Qualcomm HS-USB QDloader 9008" device!
Also added repair via JTAG interface for:
Samsung SGH-T479B and ZTE V880G.
Medusa Box v.2.4.4 Release Notes:
- Added support for the following models:
- LG D150 - added Dead Boot / Device Repair via USB
- LG D157F - added Dead Boot Repair via USB
- LG D160 - added Dead Boot / Device Repair via USB
- LG D160F - added Dead Boot Repair via USB
- LG D160G - added Dead Boot Repair via USB
- Samsung SGH-T479B - added Dead Boot/Device Repair
- ZTE V880G - added Dead Boot Repair (thanks to Mr. Dr_Wolodya)
- All pinouts and Repair procedures are described in the manual ("Help" button in Software).
To repair mentioned above devices via USB, please follow the next three steps:
- Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
(do NOT use any USB hubs!)
- Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
Drivers are in {Installation_Folder}\Driver\QHSUSB
- Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)
[YOUTUBEHD]aqMfb3HOFe4[/YOUTUBEHD]
Medusa - Ultimate Breakthrough in the Phone Repair!
Download Medusa Box v.2.4.4
-
http://www.gsmserver.com/nfs/content/6149/file/cap.pngMedusa Box v.2.4.5 is out!
We have added boot repair via USB and small TP for:
LG D280N, D280G, LG D285, D285F, D285G, D315, D315K, which are detected by PC as "Qualcomm HS-USB QDloader 9008" device!
Medusa Box v.2.4.5 Release Notes:
- Added support for the following models:
- LG D280N - added Dead Boot Repair via USB
- LG D280G - added Dead Boot Repair via USB
- LG D285 - added Dead Boot / Device Repair via USB
- LG D285F - added Dead Boot Repair via USB
- LG D285G - added Dead Boot Repair via USB
- LG D315 - added Dead Boot Repair via USB
- LG D315K - added Dead Boot / Device Repair via USB
- Added new Core ID (107180E1) for Qualcomm APQ8064
- All pinouts and Repair procedures are described in the manual ("Help" button in Software)
To repair mentioned above devices via USB, please follow the next three steps:
- Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
(do NOT use any USB hubs!)
- Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
Drivers are in {Installation_Folder}\Driver\QHSUSB
- Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)
[YOUTUBEHD]N0oePHlpcK4[/YOUTUBEHD]
[YOUTUBEHD]RF_gEqK-roo[/YOUTUBEHD]
Medusa - Ultimate Breakthrough in the Phone Repair!
Download Medusa Box v.2.4.5
-
http://www.gsmserver.com/nfs/content/6149/file/cap.png
Medusa Box v.2.4.6 is out!
We have added boot repair via USB and small TP for:
LG D618, F240K, F240L, F240S and via JTAG for Samsung GT-S5302!
Medusa Box v.2.4.6 Release Notes:
- Added support for the following models:
- LG D618 - added Dead Boot/Device Repair via USB
- LG F240K - added Dead Boot Repair via USB
- LG F240L - added Dead Boot Repair via USB
- LG F240S - added Dead Boot Repair via USB
- Samsung GT-S5302 - added Dead Boot/Device Repair
- All pinouts and Repair procedures are described in the manual ("Help" button in Software)
To repair LG D618, F240K / L / S via USB, please follow the next three steps:
- Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
(do NOT use any USB hubs!)
- Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
Drivers are in {Installation_Folder}\Driver\QHSUSB
- Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)
Medusa - Ultimate Breakthrough in the Phone Repair!
http://gsmserver.com/nfs/content/614.../plus_line.png
[YOUTUBEHD]Gxmqa8KAJaw&[/YOUTUBEHD]
http://gsmserver.com/nfs/content/614.../plus_line.png
[YOUTUBEHD]syN0Jbx-f64&[/YOUTUBEHD]
http://gsmserver.com/nfs/content/614.../plus_line.png
Download Medusa Box v.2.4.6
-
Medusa Box v.2.4.7 - LG F310L, L-04E USB repair and more!
http://www.gsmserver.com/nfs/content/6149/file/cap.png
Medusa Box v.2.4.7 is out!
We have added boot repair via USB and small TP for LG F310L and LG L-04E.
Also added Boot/Device Repair for Samsung GT-I9210T and HTC Desire (PB99210) via JTAG.
Medusa Box v.2.4.7 Release Notes:
- Added support for the following models:
- LG F310L - added Dead Boot Repair via USB
- LG L-04E - added Dead Boot Repair via USB
- Samsung GT-I9210T - added Dead Boot/Device Repair
- HTC Desire (PB99210) - added Dead Boot/Device Repair, Repair IMEI, Repair CID, Unlock (via Read Codes) (thanks to mr. mathew_di)
- Improved connect procedure for Dead Boot Repair via USB for the following devices:
- LG P710
- LG P712
- LG P713, P713GO, P713TR
- LG P714
- LG P715
- LG P716
- All pinouts and Repair procedures are described in the manual ("Help" button in Software)
To repair F310L and LG L-04E via USB, please follow the next three steps:
- Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
(do NOT use any USB hubs!)
- Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
Drivers are in {Installation_Folder}\Driver\QHSUSB
- Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)
Medusa - Ultimate Breakthrough in the Phone Repair!
[YOUTUBEHD]vQ10vZ3JU90[/YOUTUBEHD]
Download Medusa Box v.2.4.7
-
Medusa Box v.2.4.8 - LG E960, F200x USB repair and more!
http://www.gsmserver.com/nfs/content/6149/file/cap.pngMedusa Box v.2.4.8 is out!
We have added boot repair via USB and small TP for LG E960, F200K, F200L, F200S, F200LS
and via JTAG for Samsung GT-B5512 and LG F200L.
Medusa Box v.2.4.8 Release Notes:
- Added support for the following models:
- LG E960 - added Dead Boot / Device Repair via USB
- LG F200K - added Dead Boot Repair via USB
- LG F200L - added Dead Boot Repair via USB / JTAG
- LG F200LS - added Dead Boot Repair via USB
- LG F200S - added Dead Boot Repair via USB
- Samsung GT-B5512 - added Dead Boot / Device Repair via JTAG
- All pinouts and Repair procedures are described in the manual ("Help" button in Software)
To repair mentioned above devices via USB, please follow the three next steps:
- Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
(do NOT use any USB hubs!)
- Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
Drivers are in {Installation_Folder}\Driver\QHSUSB
- Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)
Medusa - Ultimate Breakthrough in the Phone Repair!
Download Medusa Box v.2.4.8
-
http://www.gsmserver.com/nfs/content/6149/file/cap.png
Medusa Box v.2.4.9 is out!
We have added boot repair via USB and small TP for LG G3 D851, G2 Mini LTE-A D620, LG D620K, LG D620R
and via JTAG for ViewSonic ViewPad 7 (VS13761).
Medusa Box v.2.4.9 Release Notes:
- Added support for the following models:
- LG D851 - added Dead Boot / Device Repair via USB
- LG D620 - added Dead Boot Repair via USB
- LG D620K - added Dead Boot Repair via USB
- LG D620R - added Dead Boot Repair via USB
- ViewSonic ViewPad 7 (VS13761) - added Dead Boot / Device Repair via JTAG (thanks to Mr. Dr_Wolodya)
- Uploaded new Full Flash and Repair files for ZTE MF100 (128MB) (thanks to Mr. Dr_Wolodya)
- All pinouts and Repair procedures are described in the manual ("Help" button in Software)
To repair mentioned above devices via USB, please follow the three next steps:
- Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
(do NOT use any USB hubs!)
- Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
Drivers are in {Installation_Folder}\Driver\QHSUSB
- Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)
[YOUTUBEHD]aA0BNYhYEoc[/YOUTUBEHD]
Medusa - Ultimate Breakthrough in the Phone Repair!
Download Medusa Box v.2.4.9
