Medusa Box Updates

[hungphongmobile™]

Version 1.0.1 – Added dead boot repair for LG SU130, LG KU4000, Samsung SPH-W8400, Samsung SCH-W560!

Medusa Box v. 1.0.1 is out! We have added dead boot repair for LG SU130, LG KU4000, Samsung SPH-W8400, Samsung SCH-W560 and fixed repair files for Huawei U1000s and Huawei U120s.

To resurrect devices perform the following steps:

• Solder JTAG cable to JTAG testpoints as explained in the manual;

• Connect battery;

• Make sure that correct model has been selected from the models list;

• Set Jtag speed to Auto (RTCK);

• Select the EasyRepair mode;

• Press the EasyRepair button and follow Wizard instructions;

• After operation is successfully finished reconnect the battery and put the phone into the Emergency mode to make sure that it has been recovered;

• Desolder JTAG wires.

To put SU130 into the Emergency mode perform the following steps:

• Reconnect battery;

• Press and hold "Call" + "Power ON" keys;

• Connect a USB cable;

• Make sure that new device appears in PC Device Manager.

To put KU4000 into the Emergency mode perform the following steps:

• Reconnect battery;

• Connect USB cable;

• Press and hold "2" + "5" + "Power ON" keys;

• Make sure that new device appears in PC Device Manager.

To put Samsung SPH-W8400 or Samsung SCH-W560 into the Emergency mode perform the following steps:

• Reconnect battery;

• Press and hold "4"+"Power ON" keys;

• Connect USB cable;

• Make sure that new device appears in PC Device Manager.

Video manuals:



Download link:

• Medusa Box 1.0.1

BR,
Medusa Team

[TuấnPhát_GSM]

Medusa Box v. 1.0.2 is out! We have added dead boot repair for LG P350, P350GO, Samsung Z300, U700 and ZTE MF626.

To resurrect devices perform the following steps:

* Solder JTAG cable to JTAG testpoints as explained in the manual
* Make sure that correct model has been selected from model list
* Set Jtag speed to Auto (RTCK)
* Select EasyRepair mode
* Press EasyRepair button and follow Wizard instructions
* After operation is successfully finished verify that new device appears in PC

Device Manager to make sure that it has been recovered
* Desolder JTAG wires

To put LG P350 or LG P350GO into the Emergency mode perform the following steps:

1. Reconnect battery;
2. Press and hold "Vol+" + "Vol-" + "Power ON" keys;
3. Connect USB cable;
4. Make sure that new device appears in PC Device Manager.

To put Samsung Z300 or Samsung U700 into the Emergency mode perform the following steps:

1. Reconnect battery;
2. Press and hold "9" + "Power ON" keys;
3. Connect USB cable;
4. Make sure that new device appears in PC Device Manager.

Video manual:



Download link: http://medusabox.com/files/softs/Medusa_1.0.2.exe

Best regards,
Medusa Team

[TuấnPhát_GSM]

Medusa Box v. 1.0.4 is out! We have added repair for ZTE K3765-Z, ZTE MF622, Huawei K3765 modems and dead boot repair for Samsung SGH-I900, SGH-I908 PDA Part!

To resurrect the mentioned above models perform the following steps:

* Solder JTAG cable to JTAG testpoints as explained in the manual.
* Make sure that correct model has been selected from model list.
* Set Jtag speed to Auto (RTCK); (1 MHz for I900-I908).
* Select EasyRepair mode.
* Press EasyRepair button and follow Wizard instructions.
* After operation is successfully finished verify that new device appears in PC Device Manager to make sure that it has been recovered.
* Desolder JTAG wires.

[TrọngTín™]

Version 1.0.6 – Added support for Qualcomm Snapdragon QSD8650 Mobile processor, Samsung SCH-W390 and numerous LG models!

Medusa Box v.1.0.6 Release Notes:

* Added support for Qualcomm Snapdragon QSD8650 Mobile processor.
* Added EasyRepair and Advanced modes for the following models:

* LG SU630
* LG KU6300
* LG LU2300
* LG SU950
* LG SH400
* LG P506
* LG P506GO
* LG P505
* LG P505R
* LG P350G
* Samsung SCH-W390

* Improved support for Qualcomm MSM72XX and QSD8250 Mobile processors.


To resurrect these models perform the following steps:

1. Solder JTAG cable to JTAG testpoints as explained in manual.
2. Make sure that correct model has been selected from model list.
3. Set Jtag speed to Auto (RTCK).
4. Select EasyRepair mode.
5. Press EasyRepair button and follow Wizard instructions.
6. After operation is successfully finished verify that new device appears in PC Device Manager to make sure that it has been recovered.
7. Desolder JTAG wires.

http://youtu.be/0PPwOe2m0gc


Download Medusa Box v 1.0.6

[GIALAI_GSM]

Version 1.0.7 – Added support for LG NTT DoCoMo and Samsung AnyCall phones! Medusa Box v.1.0.7

With this update the number of supported LG phone models has exceeded 90!


Medusa Box v.1.0.7 Release Notes:

Added EasyRepair and Advanced modes for the following models:

• LG L600i
• LG L704i
• LG L705i
• LG L705ix
• LG L706ie
• Samsung SCH-W240
• Samsung SCH-W350
• Samsung SCH-W830
• Samsung SPH-W9500
• Samsung SPH-W8300

To resurrect these models perform the following steps:

• Solder JTAG cable to JTAG testpoints as explained in manual.
• Make sure that correct model has been selected from model list.
• Set Jtag speed to Auto (RTCK).
• Select EasyRepair mode.
• Press EasyRepair button and follow Wizard instructions.
• After operation is successfully finished verify that new device appears in PC Device Manager to make sure that it has been recovered.
• Desolder JTAG wires.

Note! With Medusa Box you don't have to use any "fantastic" pinfinder devices or solder 20 wires!
We present end-user's solutions for resurrection of your devices – ready to use, tested, and with 100% working Jtag testpoint's pictures, easy step-by-step manuals and repair files!

Download Medusa Box 1.0.7

We prepared some video manuals on using Medusa Box.

Video manual 1 – Repairing Samsung SPH-W8300 with Medusa Box:

YouTube - W8300 - Easy repair with Medusa box

Video manual 2 – Repairing LG L600i with Medusa Box:

YouTube - L600i - quick and easy repair with Medusa box

Download link:

• Medusa Box 1.0.7

[TuấnPhát_GSM]

Medusa Box v.1.0.8 Release Notes:

Added support for Qualcomm MSM7225 mobile processor.
Added EasyRepair and Advanced modes for the following models:

HTC Desire

HTC Wildfire
Samsung SCH-W590
Samsung SPH-W4200
Samsung SPH-W5000

Added repair IMEI for the following models:

HTC Desire
HTC Wildfire

To resurrect these models perform the following steps:

Solder JTAG cable to JTAG testpoints as explained in manual.
Make sure that correct model has been selected from model list.
Set Jtag speed to Auto (RTCK).
Select EasyRepair mode.
Press EasyRepair button and follow Wizard instructions.
After operation is successfully finished verify that new device appears in PC Device Manager to make sure that it has been recovered.
Desolder JTAG wires.

We present ready to use, tested end-user solution with 100% working Jtag testpoint's pictures, easy step-by-step manuals and repair files meant for resurrection of your devices!

Download Medusa Box Software 1.0.8__________
Medusa Box
Deep in the boot!

[GIALAI_GSM]

Medusa Box Version 1.1.0 – Added support for HTC, Huawei, Samsung devices! Medusa Box Version 1.1.0 has been releasaed. In this version we have added support for some HTC, Huawei, Samsung devices!

Medusa Box v.1.1.0 Release Notes:

• Added support for OneNAND flash devices on Oualcomm MSM 62XX.
• Added EasyRepair and Advanced modes for the following models:

• HTC P3700 Touch Diamond
  
• Samsung SGH-F480
• Samsung SPH-W9100
• Huawei E272

To resurrect these models perform the following steps:

1. Solder JTAG cable to JTAG testpoints as explained in manual.
2. Make sure that correct model has been selected from model list.
3. Set Jtag speed to Auto (RTCK).
4. Select EasyRepair mode.
5. Press EasyRepair button and follow Wizard instructions.
6. After operation is successfully finished verify that new device appears in PC Device Manager to make sure that it has been recovered.
7. Desolder JTAG wires.

Download Medusa Box 1.1.0
_____________________
WBR,
Medusa Box Team

Medusa - Deep in the boot!

[htfone_hotrokythuat]

Medusa Box v1.1.1 - check details inside Version 1.1.1 – Added support for new LG, Samsung and HTC devices!
Medusa Box v1.1.1 Release Notes:

• Added support for Marvell PXA270 Application processor.
• Fixed some stability issues on slow computers.
• Fixed flash erase bug on some Qualcomm MSM62xx processors.
• Added support for the following devices:
  • Samsung SGH-I710 – EasyRepair mode.
  • Samsung SGH-I718 – EasyRepair mode.
  • Samsung SCH-W270 – EasyRepair and Advanced modes.
  • LG LV7400R – EasyRepair and Advanced modes.
  • HTC Hero 100 – EasyRepair and Advanced modes.
  • HTC Touch Pro 2 (Rhodium) – EasyRepair and Advanced modes.

To resurrect these devices perform the following steps:

• Solder JTAG cable to JTAG testpoints as explained in manual.
• Make sure that correct model has been selected from model list.
• Set Jtag speed to Auto (RTCK), select 1 MHz or more for I710/I718 (depends on connection quality).
• Select the EasyRepair mode.
• Press the EasyRepair button and follow Wizard instructions.
• After operation is successfully finished verify that new device appears in PC Device Manager to make sure that it has been recovered.
• Desolder JTAG wires.

Download Medusa Box v1.1.1


____________________
Deep in the boot!
WBR,
Medusa Box Team

[GIALAI_GSM]

Medusa Box v1.1.2 - 12 HTC's added! Medusa Box v. 1.1.2 – added new models and features for a wide range of HTC models!

Medusa Box v. 1.1.2 Release Notes:

Added the following models and features:

• HTC Blackstone - added Dead Boot Repair, IMEI Repair, CID Repair, Unlock (by code reading)
• HTC Magic 32A/32B (Sapphire) - added Dead Boot Repair, IMEI Repair, CID Repair, Unlock (by code reading)
• HTC Jade - added Dead Boot Repair, IMEI Repair, CID Repair, Unlock (by code reading)
• HTC Dream - added Dead Boot Repair, IMEI Repair, CID Repair, Unlock (by code reading)
• HTC Raphael - added Dead Boot Repair, IMEI Repair, CID Repair, Unlock (by code reading)
• HTC Intruder - added Dead Boot Repair, IMEI Repair, CID Repair, Unlock (by code reading)
• HTC Desire - added CID Repair and Unlock (by code reading)
• HTC Touch Pro2 - added CID Repair and Unlock (by code reading)
• HTC Wildfire - added CID Repair and Unlock (by code reading)
• HTC Diamond - added CID Repair and Unlock (by code reading)
• HTC HD2 - added CID Repair and Unlock (by code reading)
• HTC Hero - added CID Repair and Unlock (by code reading)

To resurrect these models perform the following steps:

• Solder JTAG cable to JTAG testpoints as explained in manual.
• Make sure that correct model has been selected from model list.
• Set Jtag speed to Auto (RTCK), select 1 MHz or more for I710/I718 (depends on connection quality).
• Select EasyRepair mode.
• Press EasyRepair button and follow Wizard instructions.
• After operation is successfully finished verify that new device appears in PC Device Manager to make sure that it has been recovered.
• Desolder JTAG wires.

Download link:

• Medusa Box 1.1.2

_______________
BR,
Medusa Box Team

[TuấnPhát_GSM]

Medusa Box v. 1.1.3 is out!

Medusa Box v. 1.1.3 Release Notes:

Added support for Qualcomm MSM7600 Mobile processor
Added support for following phone models:

HTC Imagio - added Dead Boot Repair, IMEI Repair, CID Repair, Unlock (by code reading)
HTC Topaz - added Dead Boot Repair, IMEI Repair, CID Repair, Unlock (by code reading)
HTC myTouch 3G (Espresso) - added Dead Boot Repair, IMEI Repair, CID Repair, Unlock (by code reading)
Samsung SCH-W300 - added Dead Boot Repair
Samsung SCH-W570 - added Dead Boot Repair
Samsung SCH-W770 - added Dead Boot Repair

To resurrect devices perform the following steps:

Solder JTAG cable to JTAG testpoints as explained in the manual;
Make sure that correct model has been selected from the models list;
Set Jtag speed to Auto (RTCK);
Select the EasyRepair mode;
Press the EasyRepair button and follow Wizard instructions;
After operation is successfully finished make sure that new device appears in PC Device Manager to make sure that it has been recovered.
Desolder JTAG wires.

Download Medusa Box Software 1.1.3
_____________
Deep in the boot
WBR,
Medusa Box Team