Medusa Box Updates

Medusa Box v1.1.4 is out! We have added support for HTC TyTN II, HTC Touch Dual, Sony Ericsson XPERIA X1, Samsung SCH-W410, Samsung SCH-W750, Samsung SCH-W3000 and Samsung SCH-W9000!


Medusa Box v1.1.4 Release Notes:

* HTC TyTN II – added Dead Boot Repair, IMEI Repair, CID Repair, Unlock (by code reading).
* HTC Touch Dual – added Dead Boot Repair, IMEI Repair, CID Repair, Unlock (by code reading).
* Sony Ericsson XPERIA X1 – added Dead Boot Repair, IMEI Repair, CID Repair, Unlock (by code reading).
* Samsung SCH-W410 – added Dead Boot Repair.
* Samsung SCH-W750 – added Dead Boot Repair.
* Samsung SPH-W3000 – added Dead Boot Repair.
* Samsung SPH-W9000 – added Dead Boot Repair.



To resurrect these devices perform the following steps:

* Solder JTAG cable to JTAG testpoints as explained in manual.
* Make sure that correct model has been selected from model list.
* Set Jtag speed to Auto (RTCK).
* Select the EasyRepair mode.
* Press the EasyRepair button and follow Wizard instructions.
* After operation is successfully finished verify that new device appears in PC Device Manager to make sure that it has been recovered.
* Desolder JTAG wires.

Download Medusa Box v1.1.4
__________________
Deep in the boot!
WBR,
Medusa Box Team

Medusa Box 1.1.5 - not a beta
Medusa Box v1.1.5 is out! We have added support for Sony Ericsson Xperia X10i, E10i, E15i, Samsung SPH-W4100 and Samsung SCH-W550!


Medusa Box v1.1.5 Release Notes:

• Added support for the following phone models:
  • Sony Ericsson Xperia X10i – added Dead Boot Repair.
  • Sony Ericsson Xperia X10 mini (E10i) – added Dead Boot Repair.
  • Sony Ericsson Xperia X8 (E15i) – added Dead Boot Repair.
  • Samsung SPH-W4100 – added Dead Boot Repair.
  • Samsung SCH-W550 – added Dead Boot Repair.
• HTC Desire – improved new flash ICs support (Flashes with 2K page).

To resurrect these devices perform the following steps:

• Solder JTAG cable to JTAG testpoints as explained in manual.
• Make sure that correct model has been selected from model list.
• Set Jtag speed to Auto (RTCK).
• Select the EasyRepair mode.
• Press the EasyRepair button and follow Wizard instructions.
• After operation is successfully finished verify that new device appears in PC Device Manager to make sure that it has been recovered.
• Desolder JTAG wires.

Download Medusa Box v1.1.5
Supported models list see here
Supported CPUs list see here
______________
WBR,
Medusa Box Team

Medusa Box v1.1.6 is out! We have added support for Qualcomm MSM8255 and MSM8655 Mobile processors (NAND and eMMC storage types supported)!


Medusa Box v1.1.6 Release Notes:

Added support for the following phone models:

HTC Inspire 4G – added Unlock (via Read codes), Repair CID, Repair IMEI, Repair: OSBL, SPL, HTC (Security area) partition.
HTC Desire HD – added Unlock (via Read codes), Repair CID, Repair IMEI, Repair: OSBL, SPL, HTC (Security area) partition.
HTC Droid Incredible 2 – added Unlock (via Read codes), Repair CID, Repair IMEI, Repair: OSBL, SPL, HTC (Security area) partition.
HTC myTouch 4G – added Unlock (via Read codes), Repair CID, Repair IMEI, Repair: OSBL, SPL, HTC (Security area) partition.

Please note! On these devices JTAG is enabled by FSBL, so Read from and Write to FSBL partition are not allowed.

Smart card update is required.

To resurrect these devices perform the following steps:

Solder JTAG cable to JTAG testpoints as explained in manual.
Make sure that correct model has been selected from model list.
Set Jtag speed to Auto (RTCK).
Select the EasyRepair mode.
Press the EasyRepair button and follow Wizard instructions.
After operation is successfully finished verify that new device appears in PC Device Manager to make sure that it has been recovered.
Desolder JTAG wires.

Download Medusa Box v1.1.6
_________________
WBR,
Medusa Box Team

Medusa Box 1.1.7
- surprise surprise Medusa Box v1.1.7
is out! We have added FREE UNLOCKING of Sony Ericsson XPERIA X10 (no server, no credits, no queues, no limits) and boot repair for Samsung SCH-W920, SCH-W930, SPH-W3500 and Sony Ericsson U20i!

Medusa Box v.1.1.7 Release Notes:

Added support for the following phone models:

• Sony Ericsson XPERIA X10 – Added Unlock via TP.
• Sony Ericsson U20i – Added Dead Boot Repair.
• Samsung SCH-W920 – Added Dead Boot Repair.
• Samsung SCH-W930 – Added Dead Boot Repair.
• Samsung SCH-W3500 – Added Dead Boot Repair.

To unlock Sony Ericsson XPERIA X10, perform the following steps:

• Solder JTAG cable to JTAG testpoints as explained in manual.
• Make sure that correct model has been selected from model list.
• Set Jtag speed to "Auto" (RTCK).
• Select "Advanced" mode.
• Press "Connect" button and wait till device will be connected.
• Press "Unlock" button.
• After operation is successfully finished verify that device was successfully unlocked.
• Desolder JTAG wires.

To resurrect these devices perform the following steps:

• Solder JTAG cable to JTAG testpoints as explained in manual.
• Make sure that correct model has been selected from model list.
• Set Jtag speed to "Auto" (RTCK).
• Select the "EasyRepair" mode.
• Press the "EasyRepair" button and follow Wizard instructions.
• After operation is successfully finished verify that new device appears in PC Device Manager to make sure that it has been recovered.
• Desolder JTAG wires.

http://www.youtube.com/watch?v=Fm8mB...layer_embedded


Download Medusa Box v.1.1.7
________________________
WBR,
Medusa Box Team

Medusa Box v1.1.8 - HTC HD7, Samsung Star and more!

Medusa Box v1.1.8 is out! We have added support for Broadcomm BCM2133 Mobile processor and support for HTC HD7, Samsung SPH-W5200, SPH-W5300, SPH-W5310, GT-S5230 (G, H, M, W), GT-S5233A (T,W)!

Medusa Box v1.1.8 Release Notes:

Added support for the following phone models:

• HTC HD7 – added Unlock (via Read codes), Repair CID, Repair IMEI, Repair OSBL, SPL, HTC (Security area) partitions.
• Samsung SPH-W5200 – added Dead Boot Repair.
• Samsung SPH-W5300 – added Dead Boot Repair.
• Samsung SPH-W5310 – added Dead Boot Repair.
• Samsung GT-S5230 (G, H, M, W) – added Dead Boot Repair.
• Samsung GT-S5233A (T, W) – added Dead Boot Repair.

To resurrect these devices perform the following steps:

• Solder JTAG cable to JTAG testpoints as explained in manual.
• Make sure that correct model has been selected from model list.
• Set Jtag speed to "Auto" (RTCK).
• Select the "EasyRepair" mode.
• Press the "EasyRepair" button and follow Wizard instructions.
• After operation is successfully finished verify that new device appears in PC Device Manager to make sure that it has been recovered.
• Desolder JTAG wires.

Download Medusa Box v1.1.8
_______________________
WBR,
Medusa Box Team

Medusa Box v1.1.8 is out! We have added support for Broadcomm BCM2133 Mobile processor and support for HTC HD7, Samsung SPH-W5200, SPH-W5300, SPH-W5310, GT-S5230 (G, H, M, W), GT-S5233A (T,W)!

Medusa Box v1.1.8 Release Notes:

Added support for the following phone models:

HTC HD7 – added Unlock (via Read codes), Repair CID, Repair IMEI, Repair OSBL, SPL, HTC (Security area) partitions.
Samsung SPH-W5200 – added Dead Boot Repair.
Samsung SPH-W5300 – added Dead Boot Repair.
Samsung SPH-W5310 – added Dead Boot Repair.
Samsung GT-S5230 (G, H, M, W) – added Dead Boot Repair.
Samsung GT-S5233A (T, W) – added Dead Boot Repair.

To resurrect these devices perform the following steps:

Solder JTAG cable to JTAG testpoints as explained in manual.
Make sure that correct model has been selected from model list.
Set Jtag speed to "Auto" (RTCK).
Select the "EasyRepair" mode.
Press the "EasyRepair" button and follow Wizard instructions.
After operation is successfully finished verify that new device appears in PC Device Manager to make sure that it has been recovered.
Desolder JTAG wires.

Download Medusa Box v1.1.8
_______________________
WBR,
Medusa Box Team

Medusa Box v1.1.9 - SE X10 IMEI, TA repair + some HTC added!

Medusa Box v1.1.9 is out! We have added world's first Repair IMEI and world's first Full Security Repair (TA Repair) for Sony Ericsson Xperia X10i! Also we have added support for HTC Desire S, HTC Wildfire S, HTC Freestyle, HTC Nexus One, Samsung SHW-A180s!

Medusa Box v1.1.9 Release Notes:

Added support for the following phone models:

• Sony Ericsson Xperia X10i – added world's first Repair IMEI and Full Security Repair (TA Repair)!
• HTC Desire S – added Unlock (via Read codes), Repair CID, Repair IMEI, Repair: OSBL, SPL, HTC (Security area) partitions.
• HTC Wildfire S – added Unlock (via Read codes), Repair CID, Repair IMEI, Repair: OSBL, SPL, HTC (Security area) partitions.
• HTC Freestyle – added Unlock (via Read codes), Repair CID, Repair IMEI, Repair: OSBL, SPL, HTC (Security area) partitions.
• HTC Nexus One – added Unlock (via Read codes), Repair CID, Repair IMEI, Repair: OSBL, SPL, HTC (Security area) partitions.
• Samsung SHW-A180s – added Dead Boot Repair.
• Added support for Qualcomm MSM7227T Mobile processor.

To resurrect these devices perform the following steps:

• Solder JTAG cable to JTAG testpoints as explained in manual.
• Make sure that correct model has been selected from model list.
• Set Jtag speed to "Auto" (RTCK).
• Select the "EasyRepair" mode.
• Press the "EasyRepair" button and follow Wizard instructions.
• After operation is successfully finished verify that new device appears in PC Device Manager to make sure that it has been recovered.
• Desolder JTAG wires.

http://www.youtube.com/watch?v=qbbhQp-6EPU&feature=player_embedded

Download Medusa Box v1.1.9

Medusa Box v1.2.0 - have a nice weekend

Medusa Box v1.2.0 is out! We have added boot repair and full repair for Samsung GT-S3650, GT-S7070, LG KU3700, SU370, KH8000, Huawei U8150, U8120 and Vodafone 845!

Medusa Box v1.2.0 Release Notes:

Added support for the following phone models:

• Samsung GT-S3650 – Boot Repair.
• Samsung GT-S7070 – Boot Repair.
• LG KU3700 – Boot Repair.
• LG SU370 – Boot Repair.
• LG KH8000 – Boot Repair.
• Huawei U8150 – Full Repair.
• Huawei U8120 – Full Repair.
• Vodafone 845 – Full Repair.

Fixed Huawei E1550 Repair (128 Mb version). Please use the latest Medusa Box version and (re)download new Repair file.

Added proper detection of 4K page NAND flash for MSM7K targets.

Together with the 20th anniversary update we’ve prepared a pleasant surprise for you!
If you are an Octopus Box user, get advantage of our fantastic offer for Medusa JTAG Box!
Had some doubts? Your time has come! http://forum.gsmhosting.com/ubb/smile.gif

Download Medusa Box v1.2.0
_______________________
WBR,
Medusa Box Team

Medusa Box v.1.2.0.1

Medusa Box v.1.2.0.1. Fixed procedure of Unlocking for Sony Ericsson XPERIA X10.

Note: if after unlocking of Sony Ericsson XPERIA X10 with v.1.2.0 the phone is still locked, please write into the phone TA backup and unlock it with v.1.2.0.1.

Download link: https://www.boot-loader.com/app/webr...sa_1.2.0.1.exe

_______________
BR,
Medusa Box Team

Medusa Box v1.2.1 is out! We have added support for Samsung S5PC110 Cortex A8 Mobile processor with OneNAND flash and support for Samsung GT-S8500, GT-I9000, SGH-I897, SGH-T959, SGH-T959V and HTC myTouch 3G!

Medusa Box v1.2.1 Release Notes:
Added support for the following phone models:

Samsung GT-S8500 – added Dead Boot/Phone Repair.
Samsung GT-I9000 – added Dead Boot/Phone Repair.
Samsung SGH-I897 – added Dead Boot/Phone Repair.
Samsung SGH-T959 – added Dead Boot/Phone Repair.
Samsung SGH-T959V – added Dead Boot/Phone Repair.
HTC myTouch 3G – added Unlock (via Read codes), Repair CID, Repair IMEI, Repair: OSBL, SPL, HTC (Security area) partition.

To resurrect these devices perform the following steps:

Solder JTAG cable to JTAG testpoints as explained in manual.
Make sure that correct model has been selected from model list.
Set Jtag speed to "Auto" (RTCK).
Select the "EasyRepair" mode.
Press the "EasyRepair" button and follow Wizard instructions.
After operation is successfully finished verify that new device appears in PC Device Manager to make sure that it has been recovered.
Desolder JTAG wires.

Download Medusa Box v1.2.1