[Chia sẻ] Unlock - repair ok by MEDUSA , ACE vui lòng post tại đây

[VuongKhoaMobile]

Connecting. Please wait...
Medusa JTAG Firmware version 1.0.9.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: 202400E1, IR Length = 4.
JTAG speed : Auto (RTCK).
VREF level : 2.61 V
CPU : Qualcomm QSD8250
Core ID : 202400E1
Flash device: Hynix H8BES0WU0MCR
Flash ID : 00AD55B3
Page size : 2048 bytes
Block size : 64 pages (128 Kb)
Block count: 8192
Flash size : 1024 Mb
HTC CID : T-MOB001
IMEI : 357779-03-005376
Opening "C:\Documents and Settings\VuongKhoaMobile\Desktop\HTC_HD2_USA_Repai r.mf" file...
Writting BOOT section. Please wait... Done
Writting HTC section. Please wait... Done
Writting APPBOOT section. Please wait... Done
Repairing CID and IMEI... Done
Disconnected
Repair done.

[VuongKhoaMobile]

Selected device model: Samsung GT-S8530
Connecting. Please wait...
Medusa JTAG Firmware version 1.0.9.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: 1BA00477, IR Length = 4.
JTAG speed : 8000 KHz.
VREF level : 2.83 V
CPU : Samsung S5PC110
Core ID : 1BA00477
Flash device: Samsung KFG4GH6Q4M
Flash ID : 00EC0050
Page size : 4096 bytes
Block size : 64 pages (256 Kb)
Block count: 2048
Flash size : 512 Mb
Write protection disabled.
Opening "H:\MEDUSA\SAMSUNG\S8530\SAMSUNG_GTS8530_Repai r.mf " file...
Writting BOOT section. Please wait... Done
Writting UPCH section. Please wait... Done
Repairing IMEI... Done
Disconnected
Repair done.

[VuongKhoaMobile]

thấy gọi đến rung chuông loa có. camera có.3g.gsm có.còn những cái khác chưa test,trả khách lụm lúa rồi

[VuongKhoaMobile]

Detected TAP ID: 202400E1, IR Length = 4.
JTAG speed : Auto (RTCK).
VREF level : 2.63 V
CPU : Qualcomm QSD8250
Core ID : 202400E1
Flash device: Samsung 512Mb
Flash ID : 00EC66BC
Page size : 4096 bytes
Block size : 64 pages (256 Kb)
Block count: 2048
Flash size : 512 Mb
HTC CID : 11111111
IMEI : 352811-04-031892
Opening "C:\Documents and Settings\VuongKhoaMobile\Desktop\HTC_HD7_Repair.mf " file...
Writting BOOT section. Please wait... Done
Writting HTC section. Please wait... Done
Writting APPBOOT section. Please wait... Done
Repairing CID and IMEI... Done
Disconnected
Repair done.

[VuongKhoaMobile]

Selected device model: Samsung GT-S8500
Connecting. Please wait...
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: 1BA00477, IR Length = 4.
JTAG speed : 8000 KHz.
VREF level : 2.81 V
CPU : Samsung S5PC110
Core ID : 1BA00477
Flash device: Samsung OneNAND KFG4GH6Q4M
Flash ID : 00EC0050
Page size : 4096 bytes
Block size : 64 pages (256 Kb)
Block count: 2048
Flash size : 512 Mb
Write protection disabled.
Opening "C:\Documents and Settings\VuongKhoaMobile\Desktop\SAMSUNG_GTS8500_R epair.mf" file...
Writting BOOT section. Please wait... Done
Writting UPCH section. Please wait... Done
Repairing IMEI... Done
Disconnected
Repair done.

[livemobi]

Repair IMEI + read code HTC Surround ok

Medusa JTAG Hardware S64 revision B.
Detected TAP ID: 202400E1, IR Length = 4.
JTAG speed : Auto (RTCK).
VREF level : 2.64 V
CPU : Qualcomm QSD8250
Core ID : 202400E1
Flash device: Samsung 512Mb
Flash ID : 00EC66BC
Page size : 4096 bytes
Block size : 64 pages (256 Kb)
Block count: 2048
Flash size : 512 Mb
HTC CID : 11111111
IMEI : 355113-13-131313
Connect successful.
ECC Mode enabled.
Repairing CID and IMEI... Done

Disconnected

Medusa JTAG Hardware S64 revision B.
Detected TAP ID: 202400E1, IR Length = 4.
JTAG speed : Auto (RTCK).
VREF level : 2.64 V
CPU : Qualcomm QSD8250
Core ID : 202400E1
Flash device: Samsung 512Mb
Flash ID : 00EC66BC
Page size : 4096 bytes
Block size : 64 pages (256 Kb)
Block count: 2048
Flash size : 512 Mb
HTC CID : 11111111
IMEI : 351807-04-199677
Connect successful.
ECC Mode enabled.
Rading codes. Please wait...
NCK Code : 48759722
Done
Disconnected

[Tempb]

cách làm :trước tiên hàn dây theo pinout trong tool hướng dẩn, kẹp nguồn sau đó trên tool ta chuyển sang chế độ advanced mode , bấm connect , kết nối cab, kẹp nguồn nhấp nút nguồn sau khi tool nhận máy ta bấm unlock , done!

tiếng việt thì quất 2 file này lên androi 2.3.3
3_0_1_G_0_75.FSP_Rachael_CUSTOMIZED_TH_WORLD_1_4_8 _1237_0336_S1_SW_LIVE_AC12_0001_S1_PARTITION_WITH_ SPARE.R3C.zip
3_0_1_G_0_75.APP_SW_RACHAEL_GENERIC_1227_4612_S1_S W_LIVE_AC12_0001_S1_PARTITION.zip

Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: 1BA000E1, IR Length = 4.
Detected TAP ID: 202400E1, IR Length = 4.
ERROR[000]: Unable to halt core.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: 1BA000E1, IR Length = 4.
Detected TAP ID: 202400E1, IR Length = 4.
JTAG speed  : Auto (RTCK).
VREF level  : 2.59 V
CPU         : Qualcomm QSD8250
Core ID     : 202400E1
Flash device: Micron 1024Mb
Flash ID    : 002C55B3
 Page size  : 2048 bytes
 Block size : 64 pages (128 Kb)
 Block count: 8192
 Flash size : 1024 Mb
Reading TA section. Please wait... Done
TA section has been backed up to "C:\Program Files\GsmServer\Medusa\Firmware\Sony Ericsson XPERIA SO-01B TA Backup 12-06-2012 10_09_13.mf".
Erasing TA section. Please wait... Done
Repairing. Please wait... Done
Disconnected
Repair done.
Selected device model: Sony Ericsson XPERIA SO-01B
Connecting. Please wait...
VREF = 0.0V is less than required level. Please check target device power supply.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: 1BA000E1, IR Length = 4.
Detected TAP ID: 202400E1, IR Length = 4.
ERROR[000]: Unable to halt core.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: 1BA000E1, IR Length = 4.
Detected TAP ID: 202400E1, IR Length = 4.
JTAG speed  : Auto (RTCK).
VREF level  : 2.59 V
CPU         : Qualcomm QSD8250
Core ID     : 202400E1
Flash device: Micron 1024Mb
Flash ID    : 002C55B3
 Page size  : 2048 bytes
 Block size : 64 pages (128 Kb)
 Block count: 8192
 Flash size : 1024 Mb
Connect successful.
Reading TA section. Please wait... Done
TA section has been backed up to "C:\Program Files\GsmServer\Medusa\Firmware\Sony Ericsson XPERIA SO-01B TA Backup 12-06-2012 10_12_28.mf".
Unlocking. Please wait... Done

[Tempb]

anh em lưu ý khi hàn xong ta dùng đồng hồ đo giửa các chân để bảo đảm ko dính chì chập chân nhé vì chấu tương đối gần

[livemobi]

Repair and Flash sony ST18i OK

Welcome to Medusa Box Flasher version 1.1.0
--------------------------------------------------------------------------------
Platform: SE Qualcomm
Selected model: ST18i
Prepairing loaders...OK
Please, reconnect battery, attach testpoint and connect USB cable...OK
Please, disconnect testpoint.
Sending loader...OK
Waiting for loader...OK
Reading info...OK
Initializing flash...OK
Flash type : NAND
Flash ID : 6690B398
NAND page size: 4096 b
NAND pages per block: 64 b
NAND spare size: 64 b
NAND blocks count: 4096
Flash size: 1024 MB
Calculating security...OK
Erasing entire flash...OK
Detected bad blocks: 0
Repairing SBL...OK
Writing TA...OK
Writing TA_MISC...OK
Phone succesfully repaired.
To complete the operation, please write firmware.

RUNNING v 1.1295/01.15/UNI
CARD SERIAL xxxxxxxxx
USBFLASH DRIVER VERSION 03.00.00.00
SIGNED MODE (USING SERVER)
CFG:100000100000
PLEASE ATTACH TURNED OFF PHONE NOW
PRESS AND HOLD "BACK" OR "VOLUME DOWN" BUTTON ...

RUNNING S1_EROM VER "r9A021"

EROM_AID : 0001
LOADER_AID : 0001
SW_AID : 0001
CUST_AID : 0001
SIM_LOCK_AID : 0001

DEVICE ID: 16BF522493F0FB784B38999ED3CF9C7F11210535
FLASH ID: "0098/00B3"
LOADER VERSION: "r4A069"

PHONE IMEI : 00000000000000
writing "D:\MOBI\setool\st18_xperia_ray\4.0.2.A.0.69\4_0_2 _A_0_69.APP_SW_Urushi_GENERIC_1248_9545_S1_SW_LIVE _883F_PID1_0001.zip"
Processing package
D:\MOBI\setool\st18_xperia_ray\4.0.2.A.0.69\4_0_2_ A_0_69.APP_SW_Urushi_GENERIC_1248_9545_S1_SW_LIVE_ 883F_PID1_0001.zip

Processing ACPU files
PROCESSING: apps_log_S1-SW-LIVE-883F-PID1-0001-S1-PARTITION.sin
FILE FLASHED OK
PROCESSING: adsp_S1-SW-LIVE-883F-PID1-0001-S1-PARTITION.sin
FILE FLASHED OK
PROCESSING: fota0_S1-SW-LIVE-883F-PID1-0001-S1-PARTITION.sin
FILE FLASHED OK
PROCESSING: fota1_S1-SW-LIVE-883F-PID1-0001-S1-PARTITION.sin
FILE FLASHED OK
PROCESSING: kernel_S1-SW-LIVE-883F-PID1-0001-S1-PARTITION.sin
FILE FLASHED OK
PROCESSING: amss_S1-SW-LIVE-883F-PID1-0001-S1-PARTITION.sin
FILE FLASHED OK
PROCESSING: cache_S1-SW-LIVE-883F-PID1-0001-S1-PARTITION-WITH-SPARE.sin
FILE FLASHED OK
no update files in package
writing "D:\MOBI\setool\st18_xperia_ray\4.0.2.A.0.69\4_0_2 _A_0_69.FSP_Urushi_TELEKOM_DE_DE_WORLD_I_1252_5786 _S1_SW_LIVE_883F_ ...
Processing package
D:\MOBI\setool\st18_xperia_ray\4.0.2.A.0.69\4_0_2_ A_0_69.FSP_Urushi_TELEKOM_DE_DE_WORLD_I_1252_5786_ S1_SW_LIVE_883F_PID1_0001.R2 ...

Processing ACPU files
PROCESSING: amss_fs_urushi_S1-SW-LIVE-883F-PID1-0001-S1-PARTITION.sin
FILE FLASHED OK
PROCESSING: userdata_S1-SW-LIVE-883F-PID1-0001-S1-PARTITION-WITH-SPARE.sin
FILE FLASHED OK
PROCESSING: system_S1-SW-LIVE-883F-PID1-0001-S1-PARTITION-WITH-SPARE.sin
FILE FLASHED OK
Processing update files
PROCESSING: simlock.ta
Elapsed: 216 secs.

[HUE_GSM]

Unlock SK17a done.


Welcome to Octopus Suite version 1.1.5
--------------------------------------------------------------------------------
Platform: SE Qualcomm
Selected model: SK17a
Connecting to server...OK
Octopus smart card is present.
Checking smart card...OK
Smart card activations: SE Unlimited, Medusa
Authorizing...OKOK
--------------------------------------------------------------------------------
Platform: SE Qualcomm
Selected model: SK17a
Please, reconnect battery, attach testpoint and connect USB cable...OK
Sending preloader...OK
Please, disconnect testpoint.
Waiting for preloader...OK
Reading info...
Sending loader...OK
Reading info...OK
IMEI: 358219-04-003971-5
Checking security...OK
Reading security area...OK
Backup saved to "C:\Program Files\GsmServer\Octopus_Suite\BACKUP\Sony
Ericsson_SK17a_35821904003971_17-03-2013_17-36-28.BKP"
Checking TA...OK
IMEI: 358219-04-003971-5
Calculating security on the server...
Sending TA to server...OK
Calculating. Please, wait...OK
Receiving TA...OK
Checking security area...
Writing security area...OK
Checking TA...OK
Shutting down...OK
Phone sucesfully unlocked!