nokia X3 flash full = USB by MTBOX ok

[GIALAI_GSM]

20c1a1d230: 20C1A1D230 - Nokia Flash/Repair v2.34B
Box: CR V 2.001 22528
Code: NK V 2.001 1052
SN: 20C1A1D230
Nokia Unlimited: 465 times started
SonyEricsson Unlimited: 0 times started
FAILED to find USB Device.
Attach phone to usb port!
Switched to USB BUS
Using Tx2 Data line.
Processing File: rm540__03.60.mcusw
Boot...
CONNECT PHONE to USB and Power ON phone!
Pooling for phone...
\\?\nmwcd#vid_0421&pid_0106&if_oth#6&1f95e5b5&0&00 #{4f919102-4adf-11d5-882d-00b0d02fe381}
RAP3Gv40_2nd.fg
Sending ULO code
RAP3Gv40_XSR17_alg.fg
Pooling for device removal...
Pooling for ADL device...
\\?\nmwcd#vid_0421&pid_0106&if_oth#6&1f95e5b5&0&00 #{4f919102-4adf-11d5-882d-00b0d02fe381}
Erase[121.38 MB]...
erasing RAP [00020000 to 000203FF]
erasing RAP [00060000 to 0009FFFF]
erasing RAP [000A0000 to 0025FFFF]
erasing RAP [003E0000 to 005DFFFF]
erasing RAP [005E0000 to 010DFFFF]
erasing RAP [01EC0000 to 01EDFFFF]
erasing RAP [027C0000 to 02CBFFFF]
erasing RAP [077C0000 to 07B3FFFF]
erasing RAP [010E0000 to 01EBFFFF]
erasing RAP [02CC0000 to 077BFFFF]
erasing RAP [01EE0000 to 027BFFFF]
in 1.06s
Flash[25.93 MB]...in 32.91s
* * Processed file in 49.58 seconds
Processing File: rm540__03.60.image_v_0581087_001
Boot...
\\?\nmwcd#vid_0421&pid_0106&if_oth#6&1f95e5b5&0&00 #{4f919102-4adf-11d5-882d-00b0d02fe381}
Erase[0.00 MB]...
in 0.02s
Flash[13.25 MB]...in 17.16s
* * Processed file in 17.20 seconds
Processing File: rm540__03.60.ppm_v
Boot...
\\?\nmwcd#vid_0421&pid_0106&if_oth#6&1f95e5b5&0&00 #{4f919102-4adf-11d5-882d-00b0d02fe381}
Erase[0.00 MB]...
in 0.00s
Flash[7.62 MB]...in 9.70s
* * Processed file in 9.72 seconds
Restarting device...
Pooling for device removal...
Pooling for device removal...
Device disconnected.
* * * Phone flashing done in 1:18 minutes
Post Flash serial tunning of phone....
Pooling mode for full factory set...
V 03.60/21-10-09/RM-540 (c) Nokia
IMEI: 359367030054498
Factory Default Settings...OK

[longtu]

lash bằng usb có cần cài pc suice gì hem bác thanks

[tuyetnhi_2007]

anh chi cần cài Nokia_Flashing_Cable_Driver là usb nó nhận nhanh và khong cần phải cài Nokia_PC_Suite nữa

[phamdienmobile]

sao cây X3 của mình cũng báo chạy ok nhưng sao khi bật nguồn chỉ hiện NOKIA rồi trắng tinh màn hình ? bấm phím vẫn kêu bíp bíp ? nó bị lỗi gì vậy mod ?

[minhung334]

MT box thì chạy con X3 ok rồi,
cho E hỏi có ai xử lý con này bằng jafpkey hay mxkey chưa vậy?
thanks!

[GIALAI_GSM]

MT box thì chạy con X3 ok rồi,
cho E hỏi có ai xử lý con này bằng jafpkey hay mxkey chưa vậy?
thanks!

mxkey thì flash bằng usb ok

[minhung334]

cảm ơn A HTFONE_KRONGPA nhiều