[Xin giúp] Mxbox check được không flash được

[sonfa139]

Mình flash con c2-00 nhưng chỉ buscheck được chứ không flash được.Khi flash nó báo như sau:
MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 1], SN: C0855593
Using device: USB ROM and HTI, FW ver: 00.50, SN: 000163A1
Connection status: UHCI:HUB::USB 1.10 (Full-speed)
Driver: NMWCD, ver: 7.1.32.75
Module ver: 1.0.0.21064(15-06-2012), Library ver: 1.0.0.14102(15-06-2012)
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
Waiting for USB ROM device ...
Device connected: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: 2772F953
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
Device synchronized.
CPU: XGOLD 213
Using embedded SBL from MCU.
Sending EBL Loader...OK
Sending EBL ...OK
Getting EBL Version ...
Boot mode: 0xCC
EBL version major/minor: 10.44
EBL version: Quantum_Bootloader_10.44_M1S1
Protocol version suggested by phone: 3
Set baud rate to: 6.50 Mbit/s
Flash ID: 0089 8982 - 23280001 [Intel NU48F512,512 Mbits]
CFI information:
Flash settings: 0/1024, size: 0x04000000
1 Block regions:
512 x 0x00020000 = 0x04000000
EBL ready !
Original IMEI: 35240805568148
RPL backup already exist (C:\mobileEx\3.5\data\backup\XGOLD_35240805568148_ back.RPL)
Market items is empty, please select the correct products path !
Nó tự chuyển sang task bb5

[VanTuan-ST]

Market items is empty, please select the correct products path !

Chọn đường dẫn lại là flash được thôi!

[NgocTin_Apple]

chụp hình những file mà bạn chọn đưa lên anh em xem nào!

[sonfa139]

[sonfa139]

AE xem giùm,lần trước đó củng chính máy này,củng chọn như thế này thì flash ok nhưng giờ chỉ buscheck được nhưng không flash được.Còn đây là log buscheck của em nó.
MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 1], SN: C0855593
Using device: USB ROM and HTI, FW ver: 00.50, SN: 000163A1
Connection status: UHCI:HUB::USB 1.10 (Full-speed)
Driver: NMWCD, ver: 7.1.32.75
Module ver: 1.0.0.21064(15-06-2012), Library ver: 1.0.0.14102(15-06-2012)
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
Device synchronized.
CPU: XGOLD 213
Using embedded SBL from MCU.
Sending EBL Loader...OK
Sending EBL ...OK
Getting EBL Version ...
Boot mode: 0xCC
EBL version major/minor: 10.44
EBL version: Quantum_Bootloader_10.44_M1S1
Protocol version suggested by phone: 3
Set baud rate to: 6.50 Mbit/s
Flash ID: 0089 8982 - 23280001 [Intel NU48F512,512 Mbits]
CFI information:
Flash settings: 0/1024, size: 0x04000000
1 Block regions:
512 x 0x00020000 = 0x04000000
EBL ready !
Waiting for USB device removal ...OK
Waiting for USB device arrival ...
Waiting for device boot up ...
Device connected: nmwcdc\Nokia C2-00 USB Phonet, PORT_ID: C2EECB
Verifying communication to device OK.


Phone type: RM-704 (C2-00)
SW version: V 03.82 17-10-11 RM-704 (c) Nokia
Imei plain: 35240805568148-9
Product code: 059C883
Battery voltage: 3551 mV, current: 91 mA
Cellular system: GSM
ASIC ID: 0x0000, type: 11
Ppm Id: V
Language Pack:
- not available.

Master code: 4152144424
Camera config: NI00CS0000040C213402, ver: 002.006

Imei net: 35240805568148
Version: SIMLOCK SERVER
Provider: GSM Test Operator
Counter: 0/3, 0/10

CONFIG_DATA: 0010100000000000
PROFILE_BITS: 800000000003000B

BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN

[VanTuan-ST]

C2-00 RM-704 là BB5 mà chọn DCT4 là báo vậy phải rồi, chọn lại tab BB5 là được!

[sonfa139]

Anh có nhầm không/em xem trong support của hwk là dct4 mà,lần trước em flash nó củng là dct4 (XGOLD),đều ok hết nhưng lần này không hiểu sao

[ThùyThương_GSM]

teamview em làm dúp anh