Update mx-key anh em vui long post ở đây nhé

[Hoang Thong Mobile]

December 15 2007

v3.0 Beta4, Public-Release.

Whats NEW:

- re-constructed, DCT4 CNT 64->128k conversion.
- Added, support for new product profile type (BB5,DCT4PLUS).
- re-constructed & improved, DCT4PLUS unlock patch
- RELOCK now possible, also support 1200/1208 all version (click "No" if you asked to restore flash block)
- Fixed, crash (application closed) on VCOM module.
- Improved, FBUS scan (will change phone mode if needed)
- Fixed, PM write function (BB5 RF & BB parameters bug)
- Added, Auto driver update for UFS and Token on setup.
- and other minor.

Note:
you could also update using "Check For Update" button from mobileEx.exe

[Hoang Thong Mobile]

December 27 2007

v3.0 Beta5, Public-Release.

Whats NEW:

- New MXKEY LiTE firmware introduced, FW ver: 00.13
- Added, JAF FBUS protocol (Flashing bus not implemented yet)
- Added, Component version info on load.
- Fixed, Erase whole flash bug on multi flash chip phones.
- Fixed, BT flush after firmware update.
- Fixed, BB5RPL decryption fail when write RPL.
- Added, Product code auto selection on "Scan"
- and other minor.

Note:
For MXKEY LiTE dongle user, you need to "Update FW" first.
This will also solved activation issue.
Use "Check For Update" button for self update

[Hoang Thong Mobile]

January 18 2008

v3.0 Beta6, Public-Release.

Whats NEW:

- JAF BOX fully supported.
- Added, Flash Emulation mode (to verify flash files, will not write to the phone)
- Added, Support for BB5 RAPIDO phones (RAP NAND flash handle)
- Added, Easy IMEI restore (Automatically search for backup from '\data\backup\RPL\' folder if available)
- Added, DCT4 Mass Memory device (NAND) flashing support
- Added, UFS FW V 2.8 update dialog if needed (required for RAPIDO phones)
- Added, UFS Driver update dialog if 'NO CONNECTION'
- Fixed, N-GAGE Adsp flashing bug (CRC error=Contact retailer).
- Fixed, DCT4 Online IMEI Logger (ESN issues)
- Fixed, WD2 boot (increasing boot timeout)
- Fixed, User Code changes
- Fixed, BT MCM image upload
- Fixed, Erase whole flash routine
- Fixed, Reset DATA1 (WD2 bug)
- Fixed, TIKU flashing with huge image header stopped
- Fixed, DCT4 UCP 128k conversion (2865 issue)
- Fixed, DCT4 PLUS SpUnlock bug on old models
- Removed, Joker module from installer
- Added, SIEMENS Tool for EGOLD and SGOLD (not tested!) module.
- and other minor.

Required:
for MXKEY, FW ver: 00.11
for MXKEY LiTE, FW ver: 00.13

Interface:
UFS FW: v2.8
JAF FW : 01.B0

[Hoang Thong Mobile]

February 07 2008

v3.0 Beta7, Public-Release.

Whats NEW:

[MAIN]
- Added, "Dont Show This Again" checkbox of UFS FW update confirmation dialog
- Improved, Check For update routine will allow to update module separately on future updates

[CCS]
- Added, New Module CCS "Foxconn PST" (NK CDMA ODM/QUALCOMM)

Features:
* Flashing using HEX/ CBB (Bundle Files)
* Normal Flashing or Emergency Mode (*+5+POWER) supported
* Flashing Emulation
* Security Code Read/Write
* SPC read/write
* LCD contrast Read/Write
* Reset File System (PRI)
* Userdata Backup/Restore
* EFS File Explorer
* And soon

[VCOM]
- Revised, VCOM module

[NK]
- Added, Patch SIMLOCK flashing option + SKip SW patch on Init Simlock (1650 bug)
- Improved, Flash erase routine
- Added, UEM WD test
- Added, Verify UEM option on DCT4 RPL write

[SIEM]
- Fixed, SGOLD baudrate issue

- and other minor.

Version Information:

Main:
» mobileEx.exe, version: 3.0.0.889
» mobileEx.dll, version: 1.0.0.1144

Modules:
» ccs.dll, library version: 1.0.0.103, module version: 1.00 beta
» nk.dll, library version: 1.0.0.897, module version: 1.00 beta
» siem.dll, library version: 1.0.0.293, module version: 1.01 beta
» vcom.dll, library version: 1.0.0.664, module version: 1.02 final

Required Dongle revision:
MXKEY, FW ver: 00.11
MXKEY LiTE, FW ver: 00.13

use "Check For Update" button for self update

[Hoang Thong Mobile]

February 12 2008

v3.0 Beta8, Public-Release

Whats NEW:

MAIN
- Fixed, "Check For Updates" bug
- Fixed, UFS baud problem (DCT4 erase issue?)

NK
- Fixed, DCT4PLUS non patch unlock (1600,1110i)
- Added, Automatically save RPL backup on "Bus Check" for DCT4
- Fixed, DCT4 Erase ! (hopefully fixes this common issue, tested on 3 different PCs Intel/AMD based)

VCOM
- Fixed, Incorrect registration pop-up

[Hoang Thong Mobile]

April 14 2008

v3.0 Beta9 RC1, Public-Release

Whats NEW:

MAIN
- Improved, Check for updates (more control to updates)
- Implemented, Online News(add RSS feeds and forum news)
- Implemented, Options to enabled/disabled specific module

NK
- MTBOX Partially supported(FBUS function)
- Improved, DCT4 boot
- Improved, Auto phone detection (always "Scan phone" or "Bus check" before any operation!)
- Improved, CDMA phones compatibility
- Improved, Keyboard test map (now possible to test all keys including communicator series)
- Added, Various tests (Camera,IR,MMC,SIM,USB)
- Added, Band & System mode control
- Added, CDMA NVD (Pri) management (under Phone Settings tab)
- Added, CDMA CS product type read
- Added, RF/BB PM backup/restore
- Added, BB5 CNT 128 K conversion
- Added, COMBOFLASH detection
- Fixed, DCT4 write RPL (add DATA1/2 only options)
- Fixed, BB5 Custom erase
- Fixed, DCT4 APE flash(better error handler)
- Improved, DCT4 SP unlock routine
- Improved, CDMA tuning (SET,CAL and PANEL data are now readed and written correctly)
- Redesigned, PMM, Phone Settings, CDMA tune & Quick Fix page(under services tab)
- Reconstructed, BB5 'Dejan K' unlocker
- Introduced, DCT4 read flash works for Asic type 2 phones only (check 'Phoenix format' for writable output) - just for test !
- Introduced, DCT4 Non Volatile Data(NVD) management (in development, not finished yet)

CCS
- Added, ARMPRG/Bootloader manual select to handle 'dead' phones
- Improved, Phone explorer routine and ui

use "Check for Update" button

[Hoang Thong Mobile]

June 08 2008

v3.0 Beta10 RC, Public-Release

Whats NEW:

MAIN
- Added, Support forum and homepage menu (News)

NK
- Added, Image DL button (direct image download from support based on product code, currently for BB5 products only !)
- Implemented, RX2 loader support (UFS FW v28 only !!!).
- Implemented, Show detailed options in configuration window
- Added, Auto select Gen when "Scan" product in configuration window
- Added, Auto set RX2 for BB5 in configuration window
- Added, market highlight for easy market choice in configuration window
- Added, Auto set RX2 for BB5 in configuration window
- Added, BB5 CNT page size detection for auto CNT conversion
- Added, Skip if not empty option
- Added, Manual PP write file
- Added, BB5 MMC and SD card content flashing
- Added, BB5 verify NPC option on write RPL
- Added, BB5 skip specific section on write RPL
- Added, BB5 skip (certificate) erase option on write RPL
- Added, BB5 Reset NPC
- Added, BB5 online logger client (instant !!!)
- Added, BB5 RPL write on RX2 enabled phones
- Fixed, DCT4 MM flash handling
- Added, DCT4 imei OTP/UEM read via FBUS for non CUI phones.
- Added, Latest DCT4PLUS ASIC11 sp unlock patch method(Patch on the fly)
- Added, DCT4PLUS ASIC11 online logger client
- Added, extended GSM/WCDMA band type set
- Improved, BB5 (RAP/CMT) NAND flash handling
- Improved, Flash chip info. device page size and type now displayed.
- Improved, DCT4PLUS ASIC11 ask read + manual IMEI/ESN input when UEM damaged
- Changed, 'Browse' to Directory setting in configuration window

CCS
- Improved, QCOM protocol for faster flashing
- Improved, Dead phone flashing handle
- Added, Phone code read for 6088,7088 phone
- Added, Image DL button (direct image download from support)
- Fixed, User area backup/restore

[Hoang Thong Mobile]

June 09 2008

v3.0 beta10 RC2 released (module patch update)

Whats NEW:

- NK library version 1.0.0.4225

-Fixed, BB5 Online Logger
-Fixed, BB5 RAP NAND (with RX2 enabled) flashing
-Added, Full BB5 RPL backup for new phone (SIMLOCK+SIMLOCK_KEY,WMDRM_PD)
-Added, BB5 user code reset(blocked counter) and status, will not lose user data.
-Improved DCT4 Asic 11 Online Logger (Imei challenge issue)
-Added, auto create folder option on configuration window
-Fixed, DP2.0 folder listing

Use "Check for update" but u need to tick "Check modules update automatically" on Options-> General Settings (beta10 required to be installed first !).

After update:
Code:

Main:
» mobileEx.exe, version: 3.0.0.2329
» mobileEx.dll, version: 1.0.0.2098
Modules:
» ccs.dll, library version: 1.0.0.498, module version: 1.00 B
» nk.dll, library version: 1.0.0.4225, module version: 1.00 B10a
» siem.dll, library version: 1.0.0.293, module version: 1.01 B
» vcom.dll, library version: 1.0.0.757, module version: 1.03
Drivers:
» UFS2XX.sys, version: 2.2.4.1
» FTD2XX.sys, version: 1.6.20.1

[Hoang Thong Mobile]

June 27 2008

v3.0 Beta11 RC2, Public-Release

Whats NEW:

MAIN
- Improved, dongle communication routine
- Fixed, Self Update

NK
- MTBOX DCT4 flash supported.
- Improved, DCT4&BB5 Online Logger
- Improved, RX2 auto enabled
- Added, Simple hint "detailed" BB selftests
- Fixed, PP extract for DP2.0 phones
- Added, DCT4PLUS UEM imei read

CCS
- Added, Forced RX queue for better handle of dead phone flashing
- Fixed, Emergency mode Image DL enabled

OTHER
Added Latest mxLogger client(v1.4a) in setup

[Hoang Thong Mobile]

November 13 2008

v3.0 Beta12 RC, Public-Release

Whats NEW:

MAIN
- Fixed, dongle registration popup

NK
- DCT3 fully implemented
- Fixed, BB5 flash for new phones
- some improvement and minor bug fixes

CCS
- Fixed, 6066/88 flash