[Xin Giúp] Lumia 525 flash lỗi

**Kim_thach** · 23-04-2016 08:21

em có con 525 repair boot done rồi nhưng flash đến 73% là báo lỗi

log ATF đây ạ

09:19:15 : ================================================
09:19:15 : Advance Turbo Flasher Found
09:19:15 : ================================================
09:19:15 : Driver Version : 00021206
09:19:15 : Library Version : 00030210
09:19:17 : Box Type : AdvanceBox Turbo
09:19:17 : Box Firmware : LogiCore 11.0.10
09:19:17 : Software Version : v12.67
09:19:17 : AdvanceBox SN : D1E66100D4E66C8CFDC99893
09:19:17 : Box Status : ACTIVATED
09:19:17 : ================================================
09:19:17 : Box Successfully Initialized
09:19:17 : ================================================
09:19:18 :
09:19:18 : VBATT Powering Down <<<<
09:19:21 : VBATT Powering Up >>>>
09:19:21 : SET VCCIO Level Done
09:19:21 : SET BSI Load Done
09:19:21 :
09:19:21 :
09:19:21 :
09:19:21 : ///////// /// /// /////// /////// /////////
09:19:21 : /// /// /// /// // /// /// /// ///
09:19:21 : /// /// /// /////// /////// /// ///
09:19:21 : /// /// /// /// /// /// /// /// ///
09:19:21 : /// ///// /// /// /////// //////
09:19:21 :
09:19:21 : =======================================
09:19:21 : /// /// /// ///////// /////// //////
09:19:21 : ///// /// /// /// /// // /// ///
09:19:21 : /// ///// /// /// /////// /// ///
09:19:21 : /// //// /// /// /// /// /// ///
09:19:21 : /// /// /// /// /// /// //////
09:19:21 : =======================================
09:19:21 :
09:19:33 :
09:19:33 : ================================================== ====
09:19:33 : Selected VPL File:
09:19:33 : RM998_059V486_3058.50000.1425.0001_059.vpl
09:19:33 : ================================================== ====
09:19:33 : Variant Details : RM-998 VAR APAC VN CV
09:19:33 : Software Version : 3058.50000.1425.0001
09:19:33 : Product Type : RM-998
09:19:33 : Product Code : 059V486
09:19:33 : Variant Version : 059
09:19:33 :
09:19:35 :
09:19:35 : ================================================== ====
09:19:35 : Flash File Checksum Verification
09:19:35 : ================================================== ====
09:19:59 : RM998_3058.50000.1425.0001_RETAIL_apac_vietnam_915 _01_444881_prd_signed.ffu: CHECKSUM PASSED
09:19:59 : ================================================== ====
09:19:59 : Verification Done...
09:20:10 : Windows Phone 8/8.1/10 Flashing Started
09:20:10 : Loading Flash Files Please Wait...
09:20:11 :
09:20:11 : [DEAD BOOT REPAIR via USB is SUPPORTED]
09:20:11 :
09:20:11 : ================================================== ====
09:20:11 : Windows Phone 8/8.1/10 Lumia Flasher
09:20:11 : ================================================== ====
09:20:11 :
09:20:11 : If the Phone is ALIVE
09:20:11 : 1. Power On the Phone and Connect it to the USB Port
09:20:11 :
09:20:11 : If the Phone is DEAD
09:20:11 : 1. Connect Phone to the USB Port
09:20:11 : 2. Press and Hold the VOLUME DOWN and POWER Buttons
09:20:11 : 3. Wait until the Phone Vibrates Shortly...
09:20:11 : 4. Stop Pressing the Buttons...
09:20:11 :
09:20:11 : If the Phone is DEAD BOOT
09:20:11 : 1. Connect Phone to the USB Port
09:20:11 : 2. Install Correct Drivers:
09:20:11 : "Nokia Emergency Connectivity" Located at:
09:20:11 :
09:20:11 : D:\AdvanceBox Turbo Flasher\Driver\NOKIA_X2_USB_DRIVERS\
09:20:11 : ================================================== ====
09:20:11 :
09:20:18 : Nokia Phone Info Mode Initiated...
09:20:18 : Please wait upto 15 Seconds for SW Reset
09:20:19 : Version: 1.1.1.3
09:20:19 : Product Code: 059V486
09:20:19 : Module Code: 0205952
09:20:19 :
09:20:19 : Continuing Previous Boot...
09:20:19 : Please wait upto 30 Seconds for Boot Re-entry
09:20:36 :
09:20:36 : Boot Flash Mode Successful...
09:20:36 : Buffers Flushed OK...
09:20:36 :
09:20:36 : Phone Info Query Start...
09:20:36 : Blocks Returned: 0x07 Blocks
09:20:36 : Block ID 0x01 :00241000
09:20:37 : Block ID 0x02 :00240000
09:20:37 : Block ID 0x03 :00E74000
09:20:37 : Block ID 0x05 :Nokia.MSM8227.P6137.1.2
09:20:37 : Block ID 0x0D :0001
09:20:37 : Block ID 0x0F :0301010100000101FF
09:20:37 : Block ID 0x10 :0100130000
09:20:37 : Checking SD Card Size...
09:20:37 : Card Size: 0x00000000
09:20:37 : Checking Platform Security Status...
09:20:37 : Platform Secure Boot Status: Active
09:20:37 : Secure FFU EFUSE Status: Active
09:20:37 : Debug Status: Active
09:20:37 : RDC Status: Not Active
09:20:37 : Authentication Status: Not Active
09:20:37 : UEFI Secure Boot Status: Active
09:20:37 : Checking Secure FFU Mode...
09:20:37 : Secure FFU Mode :
09:20:37 : Query Flash App Information...
09:20:37 : Flash App Information: 02010F011C00
09:20:37 : UEFI App: FLASH APP
09:20:37 : Flash App Protocol Version: 1.15
09:20:37 : Flash App Implementation Version: 1.28
09:20:37 : Query ROOT KEY HASH...
09:20:37 : ROOT_KEY_HASH: 25C0C84AECBD154F817825B24D4EB4BCF5E606E66228BD6A77 997ACC54710C5E
09:20:37 : Query PUBLIC ID...
09:20:37 : PUBLIC_ID: 1C48D1588B65E8A394A12DE9A2729D338D97DC90
09:20:37 : Query eMMC Info...
09:20:37 : EMMC Manufacture ID: HYNIX
09:20:37 : EMMC Product SN : 00DF0740
09:20:37 : EMMC_SIZE: 8 Gigabytes
09:20:37 : Query Battery Charge Status...
09:20:37 : BATTERY CHARGE_STATUS: 11%
09:20:37 :
09:20:37 : Sending Image Signatures...
09:20:37 : Image Signatures Accepted!
09:20:37 : Erasing Data Partition...
09:20:37 : Data Partition Erased Successfully
09:20:37 : Fixing Partitions...
09:20:37 : Preparing Buffers for DATA LOOP...
09:20:37 : Allocating System RAM OK!
09:20:37 : Start Sending DATA BLOCKS...
09:22:34 : ERROR: DATA BLOCK REJECTED at 0x40980000
09:22:34 : Check your Flash File and Phone Connection
09:22:34 : ERROR: Flashing Failed!