Octoplus Box JTAG new update!

[namnhatrang]

Octoplus JTAG v.1.9.1 is out!

Octoplus JTAG Software v.1.9.1 is out!

We have added Boot Repair via USB and small TP for LG E970, LG H220 and via JTAG for Huawei G525-U00, HTC One M7 (PN07110)!

Octoplus Box JTAG Software v.1.9.1 Release Notes

• Added support for the following models:

- LG E970 - added Dead Boot Repair via USB
- LG H220 - added Dead Boot Repair via USB
- Huawei G525-U00 - added Dead Boot / Device Repair via JTAG
- HTC One M7 (PN07110) - added Dead Boot Repair via JTAG, Repair IMEI, Repair CID (thanks to Mr. mathew_di)

• All pinouts and Repair procedures are described in the manual ("Help" button in Software)

To repair LG E970 and LG H220 via USB, please follow the next three steps:

1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
   (do NOT use any USB hubs!)
2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
   Drivers are in {Installation_Folder}\Driver\QHSUSB
3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

Download Octoplus Box JTAG Software v.1.9.1

Find out more at: www.octoplusbox.com

[namnhatrang]

Octoplus JTAG v.1.9.1 is out!

Octoplus JTAG Software v.1.9.1 is out!

We have added Boot Repair via USB and small TP for LG E970, LG H220 and via JTAG for Huawei G525-U00, HTC One M7 (PN07110)!

Octoplus Box JTAG Software v.1.9.1 Release Notes

• Added support for the following models:

- LG E970 - added Dead Boot Repair via USB
- LG H220 - added Dead Boot Repair via USB
- Huawei G525-U00 - added Dead Boot / Device Repair via JTAG
- HTC One M7 (PN07110) - added Dead Boot Repair via JTAG, Repair IMEI, Repair CID (thanks to Mr. mathew_di)

• All pinouts and Repair procedures are described in the manual ("Help" button in Software)

To repair LG E970 and LG H220 via USB, please follow the next three steps:

1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
   (do NOT use any USB hubs!)
2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
   Drivers are in {Installation_Folder}\Driver\QHSUSB
3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

Download Octoplus Box JTAG Software v.1.9.1

Find out more at: www.octoplusbox.com

[namnhatrang]

Octoplus JTAG Software v.1.9.2 - One M7, Lumia 520 and more!

Octoplus JTAG Software v.1.9.2 is out!

We have added Boot Repair for HTC One M7 (PN07140), Huawei Y300-0151, Nokia Lumia 520 and Samsung GT-S6500D!

Octoplus Box JTAG Software v.1.9.2 Release Notes

• Added support for the following models:

- HTC One M7 (PN07140) - added Dead Boot Repair via JTAG, Repair IMEI, Repair CID (thanks to Mr. mathew_di)
- Huawei Y300-0151 - added Dead Boot / Device Repair via JTAG (thanks to Mr. DoctorChiguire)
- Nokia Lumia 520 - added Dead Boot Repair via JTAG (thanks to Mr. mathew_di)
- Samsung GT-S6500D - added Dead Boot Repair via JTAG, Repair IMEI, Repair CID (thanks to Mr. mathew_di)

• Added new Repair files for:

- LG F160K
- LG D855
- Samsung SGH-I747 (Android 4.4.2) (thanks to Mr. nky777)

• Improved Repair operation for LG D855
• All pinouts and Repair procedures are described in the manual ("Help" button in Software)

Octoplus JTAG Software v.1.9.2 - One M7, Lumia 520 and more!

Download Octoplus Box JTAG Software v.1.9.2

[/INDENT]

Find out more at: www.octoplusbox.com

[namnhatrang]

Octoplus JTAG Software v.1.9.3 is out!


[/URL]

Octoplus JTAG Software v.1.9.3 is out!

Here is the small update, while we are focused on bigger things.. We're not dead, we're not sleeping. We're working!
Today we have added support for Samsung Galaxy S4 Mini, Samsung Galaxy Pocket Plus, Huawei Ascend Y200 and HTC Titan!

Octoplus Box JTAG Software v.1.9.3 Release Notes

• Added support for the following models:

- Samsung SPH-L520 - added Dead Boot / Device Repair
- Samsung GT-S5301L - added Dead Boot Repair
- Huawei U8655-1 - added Dead Boot Repair
- HTC Titan (PI39110) - added Dead Boot Repair, Repair IMEI (in Test Mode), Repair CID (in Test Mode)

• Added new Core ID (ID: 706B40E1) for MSM8960 CPU
• All pinouts and Repair procedures described in the manual ("Help" button in the Software)

Download Octoplus Box JTAG Software v.1.9.3

Find out more at: www.octoplusbox.com

[namnhatrang]

Octoplus PRO JTAG Software v.1.0.2 is out

[/URL][INDENT]Octoplus PRO JTAG Software v.1.0.2 is out!

We have added support for Samsung SCH-W690, SKY IM-R520S, SKY IM-U310, LG D486, LG H788 and more!

Octoplus PRO JTAG Software v.1.0.2 Release Notes:

🐙 Added support for the following models via JTAG:

• Samsung SCH-W690 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• SKY IM-R520S - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• SKY IM-U310 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files

🐙 Added support for the following models via USB:

• LG D486 - added Read/Write, Easy Repair, Partition Manager, Constructor for Repair Files
• LG H788 - added Read/Write, Easy Repair, Partition Manager, Constructor for Repair Files

IMPORTANT: We recommend to uninstall old Software version, before the installation of the latest one.

• Updated Medusa Flasher for work with new Smart Card firmware version.
• Added "Qualcomm HS-USB QDLoader 9008" drivers for Windows 8/10.
• All necessary drivers will be available in installation folder.
• Fixed issues with view of Help and pinouts.
• All pinouts and Repair procedures described in the manual ("Help" button in the Software).

Download Octoplus PRO JTAG Software v.1.0.2

[namnhatrang]

Octoplus PRO JTAG Software v.1.0.3 is out!

[/URL]

Octoplus JTAG PRO Software v.1.0.3 is out!

Dear Octoplus Box community!

Today we are proud to introduce you a so long awaited solution of damaged boot phones repair using MMC protocol connection, in cases when JTAG is disabled. Though this feature will be available only for upgraded box version - Medusa Pro
Unfortunately current Octoplus box hardware due to its limitations had to be reworked from scratch to gain more power and flexibility. Upgraded version features increased data transfer speeds, MMC protocol support and JTAG pinfinder!

As you may have already noticed, the PRO software was released little bit earlier introducing some new outstanding features and now we are opening its full potential! More and more new phone models will be added in upcoming releases!
For those who already enjoyed our product and wants to increase its possibilities, we have prepared an unbeated offer - Medusa Pro Upgrade Kit at a reasonable price with Free Shipping included!

P.S.: Octoplus Pro hardware in new, elegant design will be available soon

P.P.S.: Regular hardware owners can still use all the new features, except those requiring eMMC connectivity. JTAG pinfinder is available for PRO hardware only as well. PRO owners will be able to use both PRO and "old" software versions.

Octoplus Box JTAG PRO Software v.1.0.3 Release Notes:

🐙 Added Support for direct eMMC repair of the phones. *

🐙 Added JTAG PIN finder. *

🐙 Added support for the following models via eMMC*:

• LG D160 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• LG D280n - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• LG D285 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• LG D380 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• LG D410 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• LG D838 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• LG D851 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• LG E980 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• LG F440L - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• LG H345 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• LG H443 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• LG H525n - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• LG H811 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• LG H635 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• LG L23 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• LG LS660 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• LG LS991 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• LG LS996 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• LG MS323 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• LG MS345 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• LG VS930 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• Samsung GT-I8190 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• Samsung GT-I9070 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• Samsung GT-I9300 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• Samsung GT-I9308 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• Samsung GT-N7108 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• Samsung SGH-T989 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• Samsung SM-J700 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• Samsung SM-N900 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• Samsung SM-N9005 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files

* Medusa PRO Box is required!

🐙 Added support for the following models via JTAG:

• LG KH1300 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• HTC Desire 300 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• HTC Desire 600 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• HTC PM23300 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• Samsung SGH-I577 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• Sony Xperia LT26i - added Read/Write/Erase, Boot Repair, Partition Manager, Constructor for Repair Files

🐙 Added support for the following models via USB:

• LG D802 - added Read/Write, Easy Repair, Partition Manager, Constructor for Repair Files
• LG D855 - added Read/Write, Easy Repair, Partition Manager, Constructor for Repair Files
• LG F440L - added Read/Write, Easy Repair, Partition Manager, Constructor for Repair Files
• LG LS980 - added Read/Write, Easy Repair, Partition Manager, Constructor for Repair Files

🐙 All pinouts and Repair procedures described in the manual ("Help" button in the Software).

[YOUTUBEHD]bJtWmAjL8tk[/YOUTUBEHD]

Download Octoplus JTAG PRO Software v.1.0.3

Find out more at: www.octoplusbox.com

[namnhatrang]

Octoplus JTAG PRO Software v.1.0.4 is out!

[/URL]

Octoplus JTAG PRO Software v.1.0.4 is out!

We have added support for LG L Fino Dual, LG L Bello Dual, LG G2 mini, Samsung Galaxy Mega 5.8 and other phones!

Octoplus Box JTAG PRO Software v.1.0.4 Release Notes:

🐙 Added support for the following models via eMMC:

• LG D295 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• LG D335 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• LG D618 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• Samsung GT-I9152 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files

🐙 Added support for the following models via JTAG:

• LG SU410 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• Samsung SPH-W6310 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files

🐙 Updated help and pinouts in Smart Repair Files for the following models (please re-download SRF files):

• LG D280N
• LG D285
• LG D325
• LG D380
• LG D410
• LG H345
• LG H443
• LG H525N
• LG H635
• LG H811
• LG KH1300
• LG L23
• LG LS991
• LG LS996
• LG MS323
• LG VS930
• HTC Desire 300
• HTC Desire 600
• Samsung GT-I9070
• Samsung GT-I9300
• Samsung GT-I9308
• Samsung GT-N7108
• Samsung GT-S5310T
• Samsung SCH-W690
• Samsung SGH-I577
• Samsung SGH-T746
• Samsung SGH-T989
• Samsung SM-J700F
• Samsung SM-N900
• SAMSUNG SPH-W2700
• SKY IM-R520S
• SKY IM-U310
• Sony LT26I

🐙 Added new option to continue read into the same file from the moment of interruption, then “Read” operation was not completed (software was closed or stopped responding, PC suddenly shuts down, etc.)

🐙 All pinouts and Repair procedures described in the manual ("Help" button in the Software)

Download Octoplus JTAG PRO Software v.1.0.4

Find out more at: www.octoplusbox.com

[IMG]http://gsmserver.com/nfs/content/6149/file/plus_bottom_right.png[/IMG

[namnhatrang]

Octoplus JTAG PRO Software v.1.0.6 is out!

[/URL][INDENT]Octoplus JTAG PRO Software v.1.0.6 is out!

We have added support for Samsung Galaxy S III Mini, Samsung Galaxy Grand Prime, LG L70, LG L70 Dual, LG Optimus Vu and LG G3 Vigor!

Octoplus Box JTAG PRO Software v.1.0.6 Release Notes:

🐙 Added support for the following models via eMMC:

• Samsung GT-I8200N - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• Samsung SM-G530P - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• LG D320N - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• LG D325 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• LG F100S - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• LG LS885 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files

🐙 Added support for the following models via USB:

• LG F240K - added Read/Write, Easy Repair, Partition Manager, Constructor for Repair Files.

🐙 Added ability to Read/Write EXT_CSD

🐙 Added ability to include Boot1 and Boot2 into SRF and to write these partitions during Smart Repair

🐙 All pinouts and repair procedures described in the manual ("Help" button in the Software)

[INDENT]

Download Octoplus JTAG PRO Software v.1.0.6

[namnhatrang]

Octoplus JTAG PRO Software v.1.1.0 is out!


[INDENT]Octoplus JTAG PRO Software v.1.1.0 is out!

We have added support for LG LS990, LG D724 and LG D821!

Octoplus Box JTAG PRO Software v.1.1.0 Release Notes:

Added support for the following models via eMMC:

• LG LS990 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• LG D724 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• LG D821 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files

Added operation ETA information (Estimated Time of Accomplishment) to status bar

Reduced font size of log window messages

All pinouts and repair procedures described in the manual ("Help" button in the Software)

[INDENT]

Download Octoplus JTAG PRO Software v.1.1.0

[namnhatrang]

Octoplus JTAG PRO Software v.1.1.1 is out!


[/URL][INDENT]


Octoplus JTAG PRO Software v.1.1.1 is out!

We have added support for Samsung GT-N7100, Prestigio PAP5400 and LG D690!

Octoplus Box JTAG PRO Software v.1.1.1 Release Notes:

🐙 Added support for the following models via eMMC:

• Samsung GT-N7100 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• Prestigio PAP5400 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
• LG D690 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files

🐙 Box firmware has been updated! To update the firmware, it is necessary to connect the box in first place and only then run the Software.

🐙 Improved performance of Write process on Samsung and Hynix eMMCs.

🐙 All pinouts and repair procedures described in the manual ("Help" button in the Software)

[INDENT]

Download Octoplus JTAG PRO Software v.1.1.1