Octoplus JTAG Software v.1.8.3 is out!


Octoplus JTAG Software v.1.8.3 is out!

We have added boot repair via USB and small TP for LG G3 D851, G2 Mini LTE-A D620, LG D620K, LG D620R
and via JTAG for ViewSonic ViewPad 7 (VS13761).

Octoplus Box JTAG Software v.1.8.3 Release Notes

  • Added support for the following models:
- LG D851 - added Dead Boot / Device Repair via USB
- LG D620 - added Dead Boot Repair via USB
- LG D620K - added Dead Boot Repair via USB
- LG D620R - added Dead Boot Repair via USB
- ViewSonic ViewPad 7 (VS13761) - added Dead Boot / Device Repair via JTAG (thanks to Mr. Dr_Wolodya)
  • Uploaded new Full Flash and Repair files for ZTE MF100 (128MB) (thanks to Mr. Dr_Wolodya)
  • All pinouts and Repair procedures are described in the manual ("Help" button in Software)


To repair mentioned above devices via USB, please follow the next three steps:
  1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port (do NOT use any USB hubs!)
  2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
    Drivers are in {Installation_Folder}\Driver\QHSUSB
  3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)



[YOUTUBEHD]YL9sPeXoGWU[/YOUTUBEHD]


Download Octoplus Box JTAG Software v.1.8.3
Find out more at: www.octoplusbox.com