Được post bởi
CHDD HUNG PHONG
Bạn theo hướng dẫn là ok thôi
1. Connect powered ON handset to PC via Smart-Clip (phone > USB cable > Smart-Clip > LPT cable > PC).
2. Connect S-Card to PC USB port.
3. Connect power supply to Smart-Clip and power on the handset.
4. Launch SmartMoto.
5. Choose "Smart-Clip USB port" in phone connection window.
6. Press "Search". The software should perform the following steps:
o SmartMoto detects S-Card;
o SmartMoto detects Smart-Clip;
o SmartMoto detects the handset and reads all phone information.
7. Log to bookmark "Prepare".
8. Select the appropriate model from SmartMoto list. Make sure that phone model and boot version of the phone to be unlocked exactly match the model and boot version stated in the list.
9. For unlock purposes, please make sure that "Unlock automatically" option is marked.
10. Press "Prepare" button.
11. The prepare cycle starts. SmartMoto creates a Temporary Backup File* from the handset firmware.
For some models, SmartMoto will popup the following instruction to be performed:
o Remove phone’s battery;
o Insert battery back;
o Press power ON;
o Press ok in SmartMoto;
o The prepare cycle will continue.
12. At this time popup window appears at SmartMoto interface. Please follow the instructions provided therein
o Disconnect cable from the phone;
o Remove phone’s battery;
o Connect cable to the phone;
o Insert phone's battery;
o Press "Power on" key on the phone. Phone's LCD remains blank;
o Press OK in SmartMoto.
13. The handset should be detected by SmartMoto as "S Blank..." with boot 2.00 (3.00).
14. SmartMoto restores the temporary backup file
15. If the option "Unlock automatically" was marked – the handset becomes unlocked. If the option was not selected then the handset can be served for Flash, Repair PDS, Unlock or Backup purposes.
LinkBack URL
About LinkBacks
Trả lời với trích dẫn
