Z3 mở mạng mất nguồn

[phucuongmobile]

mình gặp con Z3 ver R452f _G_08_02_08R .unlock báo lổi va mất nguồn luon .mình đã repair và nap full lại cũng k cứu dc ,ai gặp giúp dùm ...:rolleyes:

[hanghuu]

Coi lại firmware cùng boot không!

[phucuongmobile]

boot AC3 ,FW củng đúng luôn

[phuck3]

ban unlock theo cách nào vậy ?Qua Yahoo cho nhanh nha bạn noido_coai_yeuem_nhutoi

[hungphongmobile™]

Bạn lại xem thử còn boot không

[hungphongmobile™]

Bạn có thiết bị smart-clip không tôi hướng dẩn cho bạn làm

[phucuongmobile]

Mình củng đang dùng smartclip ,đã làm nhiều rồi nhung chẳng hiểu sau lần này mắc nạn ,

[hungphongmobile™]

Bạn theo hướng dẫn là ok thôi
1. Connect powered ON handset to PC via Smart-Clip (phone > USB cable > Smart-Clip > LPT cable > PC).
2. Connect S-Card to PC USB port.
3. Connect power supply to Smart-Clip and power on the handset.
4. Launch SmartMoto.
5. Choose "Smart-Clip USB port" in phone connection window.
6. Press "Search". The software should perform the following steps:
o SmartMoto detects S-Card;
o SmartMoto detects Smart-Clip;
o SmartMoto detects the handset and reads all phone information.
7. Log to bookmark "Prepare".
8. Select the appropriate model from SmartMoto list. Make sure that phone model and boot version of the phone to be unlocked exactly match the model and boot version stated in the list.
9. For unlock purposes, please make sure that "Unlock automatically" option is marked.
10. Press "Prepare" button.
11. The prepare cycle starts. SmartMoto creates a Temporary Backup File* from the handset firmware.
For some models, SmartMoto will popup the following instruction to be performed:
o Remove phone’s battery;
o Insert battery back;
o Press power ON;
o Press ok in SmartMoto;
o The prepare cycle will continue.
12. At this time popup window appears at SmartMoto interface. Please follow the instructions provided therein
o Disconnect cable from the phone;
o Remove phone’s battery;
o Connect cable to the phone;
o Insert phone's battery;
o Press "Power on" key on the phone. Phone's LCD remains blank;
o Press OK in SmartMoto.
13. The handset should be detected by SmartMoto as "S Blank..." with boot 2.00 (3.00).
14. SmartMoto restores the temporary backup file
15. If the option "Unlock automatically" was marked – the handset becomes unlocked. If the option was not selected then the handset can be served for Flash, Repair PDS, Unlock or Backup purposes.

[jimmyhuyphong]

Bạn theo hướng dẫn là ok thôi
1. Connect powered ON handset to PC via Smart-Clip (phone > USB cable > Smart-Clip > LPT cable > PC).
2. Connect S-Card to PC USB port.
3. Connect power supply to Smart-Clip and power on the handset.
4. Launch SmartMoto.
5. Choose "Smart-Clip USB port" in phone connection window.
6. Press "Search". The software should perform the following steps:
o SmartMoto detects S-Card;
o SmartMoto detects Smart-Clip;
o SmartMoto detects the handset and reads all phone information.
7. Log to bookmark "Prepare".
8. Select the appropriate model from SmartMoto list. Make sure that phone model and boot version of the phone to be unlocked exactly match the model and boot version stated in the list.
9. For unlock purposes, please make sure that "Unlock automatically" option is marked.
10. Press "Prepare" button.
11. The prepare cycle starts. SmartMoto creates a Temporary Backup File* from the handset firmware.
For some models, SmartMoto will popup the following instruction to be performed:
o Remove phone’s battery;
o Insert battery back;
o Press power ON;
o Press ok in SmartMoto;
o The prepare cycle will continue.
12. At this time popup window appears at SmartMoto interface. Please follow the instructions provided therein
o Disconnect cable from the phone;
o Remove phone’s battery;
o Connect cable to the phone;
o Insert phone's battery;
o Press "Power on" key on the phone. Phone's LCD remains blank;
o Press OK in SmartMoto.
13. The handset should be detected by SmartMoto as "S Blank..." with boot 2.00 (3.00).
14. SmartMoto restores the temporary backup file
15. If the option "Unlock automatically" was marked – the handset becomes unlocked. If the option was not selected then the handset can be served for Flash, Repair PDS, Unlock or Backup purposes.

giúp người khác mà copy một cục thế này thì sao giúp được.ai có sl mà chẳng biết vào trang web của nó để có được những hướng dẫn như vậy.
theo mình nghĩ bạn nên repair pds rùi nạp lại file boot cho máy , rồi nạp file full xem sao.làm thế nào để repair thì chắc bạn cũng đã biết rồi.vì nghe bạn nói là đã từng unlock vài cái ok rùi.

[hungphongmobile™]

Bây giờ Repair PDS nạp full lại là được thôi