lúc chiều nhận 1 e pada s8500 treo logo samsung , flash lại = tool multiloader ko hết bệnh, thẩy wa z3x cũng ko xi nhê . cuối cùng lôi octopus flash phát lum lúa nên post lên đây chia sẻ cùng ae
Welcome to Octopus Box Samsung software version 1.6.1
-----------------------------------------------------------------------------------
To connect SC-01C phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Connect usb cable to phone.
6. Press "Read Info" in Octopus Samsung software.
-----------------------------------------------------------------------------------
To connect GT-S8500 phone you have to perform the following steps:
1. Go to dial window.
2. Enter "*#197328640#" number.
3. Make next steps: select Common->Service configuration->Data
service confing->USB ACM AP.
4. Restart phone.
5. Press "Read Info" in Octopus Samsung software.
Selected firmware file: S8500DXKE1_OLBKD1.oct
Please put your phone in download mode and connect to PC.
To put GT-S8500 phone into download mode you have to perform the
following steps:
1. Reconnect phone battery.
2. Press and hold "Volume +" + "Camera" + "Power" buttons.
Searching for phone. Please wait...
Found phone on COM36
Firmware write started.
Writing BOOT\BOOT_LOADER section...
Writing BOOT\DBL section...
Phone will restart now. Please don't disconnect cable!
Writing Firmware Failed
Please put your phone in download mode and connect to PC.
To put GT-S8500 phone into download mode you have to perform the
following steps:
1. Reconnect phone battery.
2. Press and hold "Volume +" + "Camera" + "Power" buttons.
Searching for phone. Please wait...
Found phone on COM35
Firmware write started.
Writing BOOT\BOOT_LOADER section...
Writing BOOT\DBL section...
Phone will restart now. Please don't disconnect cable!
Writing AMSS section...
AMSS section has been written successfully.
Writing APPS section...
APPS section has been written successfully.
Writing RSRC1 section...
RSRC1 section has been written successfully.
Writing RSRC2 section...
RSRC2 section has been written successfully.
Writing FactoryFS section...
Formating FactoryFS partition...
Formating successfully compleated
FactoryFS section has been written successfully.
Writing CSC section...
CSC section has been written successfully.
Writing SHPAPP section...
SHPAPP section has been written successfully.
Phone will restart now
Firmware writing successfully completed.