Xin Các Cao Thủ Chi Giúp Tool Jkoker
AX 72 write flash bằng toll joker báo.

Start...
Loading ServiceBoot...
Sending ServiceBoot Ok.
MobileMode: Service
HWID: 249 (AX72)
AX72 lg98 Sw02 09.11.05 09:32:15
IMEI: 357402001826467
DisplayID: 53, Sharp Dialog DA8912A
FSN: 5A269B88
SW FlashID: 0001/2221
Code(05): OTP closed
Code(09): BootKEY is written in EEPROM
Code(0E): Absence of the reference table on commands
Code(13): Complete access to BFB
Code(15): Complete condition
Code(1A): Block 76 is accessible
Code(1D): Blocks 5121,5122,5123 are present
Incorrect Battery Voltage! 4418 mV!
SecurityMode: Factory
Open file "E:\siemens\Joker_AIO\ax72\AX72lg7Sw01_00-100_FF.bin" for write in Flash.
Use file FullFlash (offset block in file = 0x000000).
FullFlash file info:
FlashID: 0001/2221
SIEMENS AX72 Sw01 lg98
RealLgPack: lg7
Start...
Loading BootsModel(AX75)...
Sending StartBoot Ok.
Sending MainBoot Ok.
Warning: HASH data error!
SIEMENS AX72 lg98 Sw02
Soft FlashID: 0001/2221
FlashID: 0001/227E-2221-2201
Flash Size: 16Mb, WriteBuffer: 32 bytes
Region(1): Blocks 128, Size 128Kb
Start EEPROM segments at addres 0x7A0000
FSN: 5A269B88 -> PhoneID: 889B265A
OTP IMEI: 357402001826467
HASH: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Read EEP0067 block (ver00), size 20 bytes - Ok.
Read EEP0076 block (ver00), size 10 bytes - Ok.
Read EEP5005 block (ver00), size 64 bytes - Ok.
Read EEP5007 block (ver00), size 10 bytes - Ok.
Read EEP5008 block (ver00), size 224 bytes - Ok.
Read EEP5009 block (ver00), size 10 bytes - Ok.
Read EEP5012 block (ver00), size 14 bytes - Ok.
Read EEP5077 block (ver00), size 232 bytes - Ok.
Read EEP5093 block (ver00), size 76 bytes - Ok.
Read EEP5121 block (ver00), size 56 bytes - Ok.
Read EEP5122 block (ver00), size 6 bytes - Ok.
Read EEP5123 block (ver00), size 12 bytes - Ok.
EEPROM blocks is written in ".\Backup\AX72lg98Sw02_Backup071214235517.eep" file.
ClearFlashSeg at 0x000000 does not answer!

có phải lỗi cài đặt đia chỉ ko?xin các anh chỉ giúp