[Xin giúp] nokia x6 phone startup failed contact retailer

[bvl_2811]

đã fomat bằng tay mà không hết
đây là log của em nó
mong ace nhiệt tình chỉ giúp



MXKEY [MxKey Team HTI Flasher Interface (WinUSB) 2], SN: C0846C4D
Using device: USB ROM and HTI, FW ver: 00.50, SN: 00010686
Connection status: EHCI:HUB::USB 2.00 (High-speed)
Driver: NMWCD, ver: 7.1.32.75
Module ver: 1.0.0.20251(25-02-2012), Library ver: 1.0.0.14016(30-03-2012)
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
CMT SYSTEM ASIC ID: 000000010000022600010006400C192101051103 [RAPIDO3G ver: 1.15]
CMT EM0 ID: 00000296
CMT EM1 ID: 00000B22
CMT PUBLIC ID: 0C60010BE59E0052307970F2F9DADC99B3BCEE89
CMT ASIC MODE ID: 00
CMT ROOT KEY HASH: 479C6DDE3942E12C429C1D6ADED80371
CMT ROM ID: 4B9B75103E691FF8
Loading CMT secondary boot code
SecondaryBoot: RAPIDOv11_2nd.fg [BB5] version: 11.14.0 revision: 2.0 size: 0x3B80
Supported Ids: 0003192101001203, 000C192101001203, 4003192101001203, 400C192101001203, 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105, 4003192101051103, 400C192101051103, 400C192101051105, 4003192101051105
eBB5ProtocolType: NEW
Secondary boot loaded.
Storage0: 0000 0000 - 0000 0000 type: RAM, asic:CMT
Storage1: FFFF 0000 - 0000 0000 type: MMC, asic:CMT
Storage2: 0400 0000 - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT
Storage3: 0000 0001 - 0000 0000 [unused/removed] type: FLASH,NOR, asic:CMT
Storage4: 00EC 0050 - 0000 0031 [Samsung ] type: FLASH,MuxOneNAND, asic:CMT
Suggested algorithm: XSR 1.6
Loading CMT update server data
Algorithm: RAPIDOv11_XSR15_alg.fg [XSR 1.5] version: 11.14.0 revision: 2.0 size: 0x8798F
Supported Ids: 0003192101001203, 000C192101001203, 4003192101001203, 400C192101001203, 0003192101002003, 000C192101002003, 4003192101002003, 400C192101002003, 4003192101011103, 400C192101011103, 4003192101021103, 400C192101021103, 4003192101031103, 400C192101031103, 4003192101011105, 400C192101011105, 400C192101021105, 400C192101031105, 4003192101051103, 400C192101051103, 400C192101051105, 4003192101051105
Update server code loaded.
FUR: Adding Asic CMT as client OK.

Reading CMT NPC (0xFF bytes).
Reading CMT VARIANT (0x0 bytes).
Reading CMT CCC (0xFF bytes).
Reading CMT HWC (0xFF bytes).
Reading CMT R&D (0xFF bytes).
Reading CMT PARTNERC (0x0 bytes).

Waiting for USB device removal ...OK
Waiting for USB device arrival ...OK
Waiting for device boot up ...
Device connected: nmwcdc\Nokia X6-00 USB Phonet, PORT_ID: 1E02EEFE
Verifying communication to device OK.

Phone type: RM-559 (Nokia X6-00)
SW version: V ICPR72_11w16.1 28-07-11 RM-559 (c) Nokia
ApeCoreSw: V 40.0.002
Imei plain: 35342204927701-4
Product code: 059B881
Battery voltage: 3666 mV, current: 285 mA
Language Pack:
- not available.

SLPA ver[4]: PA_SL3/PA_SIMLOC30 (15 digit NCK)
warning: avoid SW Downgrade & manual erase to this phone !

SIMLOCK seems to be valid
SUPERDONGLE_KEY seems to be valid
CMLA_KEY seems to be valid
WMDRM_PD seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST passed


Imei net: 353422049277014
Version: SIMLOCK SERVER
Counter: 0/3, 0/10

CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000

BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN

[VanTuan-ST]

Full Factory cái nếu vẫn không hết load ver Này về flash lại xem.

[bvl_2811]

Full Factory cái nếu vẫn không hết load ver Này về flash lại xem.

full factory rổi mà không hết
em chạy lên 40.0.002 rồi chạy file 32.0.002 liệu có ổn không mod

[thuyet_mobile]

SLPA ver[4]: PA_SL3/PA_SIMLOC30 (15 digit NCK)
warning: avoid SW Downgrade & manual erase to this phone !

Nhìn thấy dòng đấy ko bạn?
ko đc hạ ver

[Tu0977717405]

theo ý kiến của e. thì con flash bị lỗi rồi. thường thì thay mới hết bệnh. đây chỉ là kinh nghiệm riêng e, a thấy áp dụng được thì làm.

[Tu0977717405]

còn chuyện hạ ver thi vẫn được nhưng phải tích vào ô downrgade . khuyên bạn không nên hạ ver vì có thể mất nguồn

[ThùyThương_GSM]

trời sl3 mà anh bảo hạ ver cũng được là xao.khó hiểu quá