tình trạng là em nhận của khách con 1280 rơi nước e đã sấy rât kỹ rồi nhưng vẫn mất nguồn.em chạy bằng hwk thì log cua e nó như thế này mong ae giúp e nha:
If used non Auto-Ignition cable, press Power-On button
IF_SBL: XGOLD110, Ok
IF_EBL: Default_RAM_Bootloader.10.19, Mode: CC
BAUD_R: 921600
FL_ID : 2000C088, Numonyx M58WR064KU 64Mb
MCU FLASH BUNDLE: rm647_006.510
Flash File: hw_b2_rm647_r06.510.fls
Erase Area: 0x00800000 - 0x00A0FFFE, Erased: 00:25
Write Area: 0x00800000 - 0x00A0FFFE, Written: 00:39
Erase Area: 0x00C60000 - 0x00EAFFFE, Erased: 00:28
Write Area: 0x00C60000 - 0x00E5933E, Written: 00:40
Erase Area: 0x00FFC000 - 0x00FFFFFE, Erased: 00:00
Write Area: 0x00FFC000 - 0x00FFC03E, Written: 00:00
Warning, Checksum Mismatch: AB72 > FEF2
PPM FLASH BUNDLE: rm647_006.51mr
Flash File: hw_b2_rm647_006.51mr.fls
Erase Area: 0x00210000 - 0x0045FFFE, Erased: 00:28
Write Area: 0x00210000 - 0x003288BE, Written: 00:21
Warning, Checksum Mismatch: 0715 > 1391
CNT FLASH BUNDLE: rm6470_nai06.51mr
Flash File: hw_b2_rm6470_nai06.51mr.fls
Erase Area: 0x00EB0000 - 0x00F7FFFE, Erased: 00:09
Write Area: 0x00EB0000 - 0x00EFBA3E, Written: 00:06
Flashing Done: 03:27
ShutDown Done
log của e nó như vậy đó mong ae giúp gấp.e cảm ơn