[Xin giúp] 1209 cần giúp

[loiphone]

mình gặp một cây 1209 nó bị mất hiển thị màn hình.mình đã vê sinh kỹ thay cáp giờ máy lên nguồn bình thường.nhưng chỉ được một lát là cứ đơ không hoạt động gì nữa mong ae chỉ giáo thêm.mình cho vao jaf chạy nó báo như thế này ae ạ:
Getting MCU ID
Incorect MCUID!
Causes:
1. Cable is not good -> check for 68k resistor b/w bsi-gnd in connector and 3.3k resistor in serial with bsi line

MCU ID: 0xFFFF
Can't find boot file...
Failed! Aborting!
Done!
Phone Restarted...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Switching to serial...
Powering the phone...
Reading...
MCU SW version: V 5.23
10-03-08
RH-105
(c) NMP
HW version: 2602
PCI version:
UEM version: 1328
UPP version: 8850
RFIC version: 0700
DSP version: P06w45.v47
LCD version: SDI:NAXv89
S6B33BD
PPM version: V 5.23
10-03-08
RH-105
(c) NMP
MR
ADSP SW version: V 5.23\n10-03-08\nRH-105\n(c) NMP\nmr
Production serial number: IEM064113
Product code: 0560031
Module code: 0203484
Basic production code: 0558649
Flash code:
Order number:
Product specific data:
Long production SN:
ATO:
Default SN type:
IMEI plain: 353541025459526
IMEI spare to net: 3A 35 45 01 52 54 59 02
IMEI SV to net: 33 35 45 01 52 54 59 52 F4
Master Code: 0465216663
Phone type: RH-105, Software version: 5.23, Language Pack: MR
User code: ÿ#

Block 1:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 2:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 3:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 4:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 5:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 6:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 7:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN

Searching for saved ini...
Checking for file C:\Program Files\ODEON\JAF\JAF_RH-105.ini
Saved INI not found, loading INI list...
Setting local mode...
Reading product code...
Product Code: 0560031
Checking path: C:\Program Files\Nokia\Phoenix\Products\RH-105\

Searching for default location of ini...
Checking path: \Products\RH-105\
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RH-105\
No ini files found...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RH-105\rh105_05.910
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RH-105\rh105_05.910
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RH-105\rh105_05.91mr
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RH-105\rh105_05.910
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RH-105\rh105_05.91mr
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RH-105\rh1050_nai5.91mr
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
MCU: C:\Program Files\Nokia\Phoenix\Products\RH-105\rh105_05.910
Booting phone...
Incorect MCUID!
Causes:
1. Cable is not good -> check for 68k resistor b/w bsi-gnd in connector and 3.3k resistor in serial with bsi line
MCU ID: 0xFFFF
This MCU ID is not supported in chosen flash file...
Error booting phone...

như vậy là đang bị ở con vậy hả ae.