ATF báo lỗi xin giúp thank

[nguyenlaluong]

tình hình em mới mua hộp ATF bây giờ chạy cái máy nào no cũng báo lỗi xin các bro chỉ em với :Number of Image Files: 3

Processing Image File :
rm635__10.65.mcusw
CMT Type : BB5
CMT Algorithm : BB5 ALGORITHM
Secondary Sending Speed : 3250000Hz
Algorithm Sending Speed : 6500000Hz
Program Sending Speed : 6500000Hz
Message Reading Speed : 98000Hz
Number of Blocks : 1165
Entry Point: 0x5047
Page Format : -1
MAX PAGE : 0x00004000

Processing Image File :
rm635__10.65.ppm_v
CMT Type : BB5
CMT Algorithm : BB5 ALGORITHM
Secondary Sending Speed : 3250000Hz
Algorithm Sending Speed : 6500000Hz
Program Sending Speed : 6500000Hz
Message Reading Speed : 98000Hz
Number of Blocks : 260
Entry Point: 0x00B6
Page Format : -1
MAX PAGE : 0x00004000

Processing Image File :
rm635__10.65.image_v_silver
CMT Type : BB5
CMT Algorithm : BB5 ALGORITHM
Secondary Sending Speed : 3250000Hz
Algorithm Sending Speed : 6500000Hz
Program Sending Speed : 6500000Hz
Message Reading Speed : 98000Hz
Number of Blocks : 640
Entry Point: 0x00C8
Page Format : -1
MAX PAGE : 0x00004000



AUTO SELECTED DEAD USB FLASHING...

If Phone Booting does not Start in 5 Seconds,
Then Perform Steps 1, 2, 3 and 4...

1. Remove USB and Battery...
2. Insert USB.
3. Insert Battery. (Some phones boot automatically)
4. Please Power on phone shortly...

AdvanceFBox SendBootCodeEx
InitialiseBootstrap_DCT5 DIR
BootFlashMode_DCT5
READING BOOTROM

BootFlashModeDCT5Ex Succeeded First Time
SYSTEM_ID_RESPONSE_BB5 (0xC0) - 96 (0x60) bytes returned
Number of Sub Blocks 7 (0x07)
1 SYSTEM_ASIC_ID 01
Block Length : 21 (15)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00000001
ID DWORD 1 : 00000226
ID DWORD 2 : 00010006
ID DWORD 3 : 030C1921
ID DWORD 4 : 01033000
2 EM_ASIC_ID 02
Block Length : 5 (05)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00000296
3 EM_ASIC_ID 02
Block Length : 5 (05)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00000B22
4 PUBLIC_ID 12
Block Length : 21 (15)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 14D00106
ID DWORD 1 : 0A780256
ID DWORD 2 : 2BE3F922
ID DWORD 3 : F08609D6
ID DWORD 4 : 187DF74B
5 ASIC_MODE_ID 13
Block Length : 2 (02)
BB ASIC Index : 0 (00) CMT
Mode Id : 00
6 ROOT_KEY_HASH 14
Block Length : 17 (11)
BB ASIC Index : 0 (00) CMT
Hash : 9D DB FC FE 6E 73 CE D7 D8 C6 26 8C 8E B8 57 23
7 ROM_ID 15
Block Length : 9 (09)
BB ASIC Index : 0 (00) CMT
CRC 0 : 273F6D55
CRC 1 : DFAAF68F

ADL_SERVER: PROCESSING rm635__10.65.mcusw
ADL_SERVER: ROOT_KEY_HASH MATCH FOUND
ADL_SERVER: PROCESSING rm635__10.65.mcusw
ADL_SERVER: CMT CERTIFICATE BLOCK FOUND
ADL_SERVER: CMT DATA BLOCKS FOUND
ADL_SERVER: CONSOLIDATING CMT BLOCKS
ADL_SERVER: PASUBTOC BLOCK FOUND

BB5 ADL Loader Start Up... (Please Wait...)


ERROR: ADL Loader was not accepted

PAPUB Key HASH is EMPTY or BLANK.

Try "Skip ADL Check" Option or use FBUS Flashing

Booting/Flashing Failed...
Please Try Again...

[BMmobile]

bum yahoo lên xem giúp bạn wa teamviewer nhé

[nguyenlaluong]

yahoo đâu bác cho em xin cái địa chỉ cảm ơn

[BinhMinhGSM]

cái đó là pc chưa nhận đc full driver phone nhé,nếu a flash như trên bằng usb thì cần cài nokia pcsuite,và thao tác kết nối phone lần đầu khoàng 2,3 lần như vậy thì ATF mới work đc,nó báo như trên a cứ việc click flash lại và rút cáp,gim cáp,gắn pin,nhấp nguồn lại lần nữa thì box sẽ flash thôi.