Các bạn giúp mình vơi, mang ra thợ rồi nhưng vẫn ko xóa đc pass. Giờ có cách gì xóa đc = cable usb ko nhỉ ? Con này có ấn phím cứng reset factory ko nhỉ
Các bạn giúp mình vơi, mang ra thợ rồi nhưng vẫn ko xóa đc pass. Giờ có cách gì xóa đc = cable usb ko nhỉ ? Con này có ấn phím cứng reset factory ko nhỉ
Volcano Updated: 2013-11-08
Connecting...
Connection successful,connected state!
Version: V3.8
SN:366-614-035
Port:COM25
After format or Flash you have to press & hold power button for at least 1.30 mins.
Note for win7 users :
Start your Win 7 64bit with F8 key and choose 'Disable Driver Signature Enforcement'.
After that the spd drivers will have the ability to be loaded.
Available Ports:COM1 COM25
Detection initiated...
Vcc: 1
Gnd: 7
Analyzing D+ and D-...
User stop
Pinouts are not fonud!
Detection initiated...
Vcc: 1
Gnd: 7 18
Analyzing D+ and D-...
D+ = 21, D- = 22
Analyzing USB device, please wait...
Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
Setting...
Find USB device:SPRD U2S Diag (COM28), (VID_1782&PID_4D00)
Pinouts setting complete!
Internal version: Spreadtrum Boot Block version 2.0
Boot downloaded.
Start boot please wait a moment....
BOOT Ver: Spreadtrum Boot Block version 1.2
CPU TYPE:SC6600L [66007009]
FLASH ID: 0001227E22442200
Flash Type:[SPANSION] S29WS128P
Size:0x1000000(16MB)
--------------------------------------.
Phone imei lists.
IMEI1:356008015223335
IMEI2:356008015223343
IMEI3:356008015223350
Read Info finish.
Detection initiated...
Vcc: 1
Gnd: 7 18
Analyzing D+ and D-...
D+ = 21, D- = 22
Analyzing USB device, please wait...
Find USB device:SPRD U2S Diag (COM28), (VID_1782&PID_4D00)
Internal version: Spreadtrum Boot Block version 2.0
Boot downloaded.
Start boot please wait a moment....
BOOT Ver: Spreadtrum Boot Block version 1.2
CPU TYPE:SC6600L [66007009]
FLASH ID: 0001227E22442200
Flash Type:[SPANSION] S29WS128P
Size:0x1000000(16MB)
IMEI :356008015223350
[privacy lock] 1122
[phone lock] 0606
One privacy lock: 1-9 or #.
Reading IMEI password completed.
Hiện có 1 người đang xem bài này . Bao gồm : 0 thành viên và 1 khách