Here are first steps with RIFF JTAG Box:
  • Connect RIFF Box and install provided USB Driver
Now You are ready to download complete repair packs ,new firmware and latest JTAG Manager software:

  • Run the JTAG Manager setup file and install it
  • Click JTAG Manager icon in Quick Launch menu, or run it from Start-> Program Files menu
  • Switch to "Box Service" TAB and click "Check for Updates" button
  • Allow JTAG MAnager to access internet if You have firewall
  • JTAG Manager will connect to update server and inform You about available updates.
  • Click "Download Selected" and wait for process to be finished. Take note, there is around 250 MB of files at the moment, so in case You want only new firmware and JTAG Manager, and some of the repair DLL-s, You can uncheck rest of the files and download only selected.
  • After download is finished, You will be notified, and JTAG Manager will restart, informing You about new firmware.
  • Finish the firmware upgrade process and after RIFF Box restart You are ready to work.
Working with dead phones:

  • Start the JTAG Manager and switch to "Resurrection" TAB
  • Select Your model and its part - PDA or Modem if You have Samsung
  • Click "Interface pinout" button and connect the PCB to RIFF Box 20 pin connector
  • Click "Resurrection Help" and CAREFULLY read the manual!
  • Click on "Resurrection" button and wait for process to be finished
  • Assemble PCB and reflash it with normal firmware
    Thats it
  • If You have any problem which is not described in Resurrection Manual, please ask on forum. Always try to include operation log and as much as possible informations.