RIFF BOX JTAG New Update AE Post ở đây

[GIALAI_GSM]

RIFF JTAG - Samsung updates !

26.10.2011 Samsung Galaxy S Plus (i9001) Unbrick, boot repair supported

Whats new : Samsung Galaxy S Plus (i9001)

Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.


RIFF Box – JTAG Revolution

[thanhtunggialai™]

RIFF JTAG - Samsung i9003, Samsung m820 supported 28.10.2011 - RIFF JTAG Updates

Whats new :

• Samsung i9003 (Samsung Galaxy SL) Unbrick, boot repair
• Samsung m820 (Samsung Galaxy Prevail) Unbrick, boot repair
• ZTE RD518 Boot repair

To download and install updates, please close all running applications and press "Check for Updates" button in RIFF JTAG Manager.

Carefully read resurrection manual for i9003 to avoid frustration !


RIFF Box – JTAG Revolution Galaxy RulerZZZZZZZ

[thanhtunggialai™]

11.11.2011 SonyEricsson Unlock/IMEI/TA Repair supported

Whats new :

With this release, we now support Unlock, IMEI repair and TA repair for listed SE models.
You can now totally rebuild software in these models, after replacing NAND chip for example. At the moment, we have following models released :

• x8
• x10
• x10 mini
• x10 mini pro

Remember that these models can have different names (e10, e15, u20 etc)
Please check up this link for more information :


RIFF JTAG – Unlock/IMEI/TA repair – SonyEricsson x8, x10, x10 Mini, x10 mini pro (e15, e10,u20 etc) « RIFF Box – JTAG Revolution




New JTAG Manager has been released too, together with new RIFF Box firmware. Please check this link for more :



RIFF JTAG – JTAG Manager v1.37, RIFF Box firmware v1.28 released « RIFF Box – JTAG Revolution


RIFF Box – JTAG Revolution - Galaxy RulerZZZZZZZZZZZZZZZZZ

[TuấnPhát_GSM]

Hello

So, we need RIFF users with some free time and few SEMC phones.

- SE X2 Needed working phone ! ! !
- X8/E15 - not required anymore
- X10 - not required anymore
- X10 Mini/E10i - not required anymore



Thank You.

edit :

Now, after some models support is released, I'll try to explain what happens with SEMC QC based phones.

- SEMC boot is NEVER reflashed during update proces, hence phone can not have erased bootloader. This, however, can happen in unlocking process, hence we have added it as option.
- If Your phone has damaged TA (Trim Area or GDFS) then now is possible to repair it.


There are many phones which have some HW error, which results in not booting, not entering download mode or not reacting at all.

When You can repair Your phone ?

From many months of testing with Xperia x10i, we've found rather few situations when phone is actually fixed :

- Phone firmware update failed at AMSS area, and after this phone wont enter bootloader mode. To fix this problem, simply erase AMSS area, and this will allow phone to enter download mode.

- Phone boot is damaged by failed unlock
To fix this problem, simply tick "Repair BOOT" box and press "Resurrect"

- Phone has damaged TA (Trim Area) or wrong IMEI
To fix this problem, or repair IMEI, simply tick "Repair TA Zone" and enter correct IMEI number. Remember that IMEI change is illegal in some countries, and You're allowed only to REPAIR damaged IMEI !



If You wish to unlock Your phone for FREE, do this:

- Select "Unlock Your Phone" TAB
- Press "Unlock"



What settings are best for SEMC QC phones ?

- RTCK Sampling 8MHz
- External power + USB Cable



What to do in case that phone has no network ?

- Connect phone to RIFF Box
- Select model
- Click "Resurrection"
- Tick "Repair TA Zone"
- Enter valid IMEI
- Click "Resurrect"


Please understand :

- You CAN repair phones with erased or damaged TA (GDFS) area now.
- You CAN NOT repair phones with hardware problems.

I hope this is enough information for any possible situation, hence there is no need to ask same questions again and again.

[thanhtunggialai™]

19.11.2011 – QUALCOMM MDM6600 NAND Generic DLL released
Whats new:

QUALCOMM MDM6600 NAND DLL

Use this for phones which have MDM6600 in baseband – eg LG P999, iPhone 4s, and many other phones which use TEGRA2 AP CPU.

QUALCOMM MSM7227 OneNAND DLL (2kb page)
QUALCOMM MSM7227 OneNAND DLL (4kb page)
QUALCOMM QSC6xxx OneNAND DLL

All other QUALCOMM Generic DLL-s are now under same branch, so here is full revised list :

ESM7xxx L41 D04 NAND
MDM6600 NAND
MSM6xxx L06 D02 NAND
MSM7227 L41 D08 OneNAND
MSM7227 L41 D08 OneNAND 4k
MSM7xxx L41 D04 NAND
MSM7xxx L41 D08 NAND
QSC1100 x14 NOR
QSC60xx L18 D08 NOR
QSC6xx L20 D08 NOR
QSC60xx L24 D08 NOR
QSC6xxx L32 D08 NAND
QSC6xxx L36 D08 NAND
QSC6xxx L36 D08 OneNAND
QSD8xxx L41 D04 NAND

Press “Check for updates” button in order to download and install new files.


RIFF Box – JTAG Revolution

[GIALAI_GSM]

RIFF JTAG - CDMA updates !

21.11.2011 CDMA Updates released

Whats new:

• Added repair support for ZTE F280
• Added repair support for Micromax C100
• Added repair support for Intex In50
• Added repair support for Huawei ETS2225
• Added repair support for Huawei ETS 2222
• Added repair support for Huawei ETS2205

Please click “Check for Updates” button in Box Service TAB in order to download and install new files.

RIFF Box – JTAG Revolution

[TuấnPhát_GSM]

Samsung P1010 is based on the OMAP3630 (ARM core is Cortex-A8).

Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on. But note, in very rare cases it is possible that you will have to hold Power On key during initial connection.
In case after resurrection (after you have tried with both boot versions) the download mode is not initiated (LCD remains blank) do repeat resurrection with ‘Clone Gremlin zone’ option checked.
Please note, in most cases you will be required to insert Samsung P1010 RIFF™ MagicCard into phone’s SD slot before starting resurrection. In case you don’t have such card yet, you can create it on the “Samsung P1010 RIFF™ MagicCard” page of the resurrector settings dialog.
This is IRAM version of the Samsung P1010 resurrector. We recommend you using it only in case you had problems connecting to phone with normal Samsung P1010 resurrector DLL.

To resurrect Samsung P1010:

* Solder JTAG cable to Samsung P1010 JTAG pads;
* Insert Samsung P1010 RIFF™ MagicCard into phone’s SD slot;
* Connect USB cable to phone and PC;
* Insert battery;
* Make sure Samsung P1010 is selected in the list of models;
* Click Resurrect button;
* Wait till software signals a successful operation completion;
* Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

To enter download mode:

* Disconnect PC cable;
* Insert battery;
* Hold both ‘Volume Down’ and ‘Home’ keys and press Power-On.

There are two DLL-s (Normal and iRAM version) – You can use iRam version in case normal one doesnt work properly. iRam version is much slower, but more robust.



CDMA Models added today :

* ZTE AC2766
* ZTE AC2746
* AnyData ADU555C

Please click “Check for Updates” button in order to download and install new updates.

[livemobi]

RIFF JTAG – Samsung Star Duos (C6712) Unbrick – Boot repair supported

29.11.2011 Samsung Star Duos (C6712) Unbrick – Boot repair supported
Samsung C6712 resurrection is simple. Battery is not required. To power the board it’s most convenient to use an USB Data Cable.
In order to contact to JTAG pads you may need to carefully scratch off paint covering (mask layer) above them. Sometimes there is reset problem with these phones, thus you may need to disconnect and then connect USB cable again.
To resurrect Samsung C6712 do this:

• Solder JTAG cable to Samsung C6712 JTAG pads;
• Insert battery and connect USB cable to phone and PC;
• Make sure Samsung C6712 is selected in the list of models
• Click Resurrect button;
• Wait few seconds until software signals a successful operation completion;
• Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.
To enter download mode:

• Disconnect PC cable;
• Insert battery;
• Hold both ‘Volume Down’ and ‘SIM Swap’ keys and press Power-On.

__

[GSM_SONGCONG™]

RIFF JTAG - Samsung updates !
29.11.2011 Samsung Star Duos (C6712) Unbrick – Boot repair supported


Whats new :

Added support for: Samsung Star Duos (C6712) Unbrick


Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.


RIFF Box – JTAG Revolution

[TuấnPhát_GSM]

22.11.2011 CDMA Huawei C2856 Supported


Added support for : Huawei C2856


Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.


RIFF Box – JTAG Revolution