RIFF BOX JTAG New Update AE Post ở đây

[ĐẶNG BẢO_GSM™]

RIFF JTAG – HTC 7 Pro (HTC Gold) Unbrick, Unlock, IMEI and CID repair supported
RIFF JTAG – HTC 7 Pro (HTC Gold) Unbrick, Unlock, IMEI and CID repair supported

RIFF JTAG – HTC 7 Pro (HTC Gold) Unbrick, Unlock, IMEI and CID repair supported


RIFF JTAG - eMMC Partition Plugin v1.0 Release

RIFF JTAG – eMMC Partition Plugin v1.0 (Qualcomm EBR-MBR based eMMC flash images processing)



Bug Fix

HTC_Sensation_PG58130.dll
-------------------------------------
- fixed bug due to which it said "Supplied data block to be flashed is damaged."




Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.

RIFF Box – JTAG Revolution

[ĐẶNG BẢO_GSM™]

RIFF JTAG – Samsung GT-S5830i,Samsung Galaxy Mini – GT-S5570iBoot repair supported
RIFF JTAG – Samsung Galaxy Ace – GT-S5830i Unbrick – Boot Repair supported



RIFF JTAG – Samsung Galaxy Mini – GT-S5570i Unbrick – Boot repair supported




Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.


RIFF Box – JTAG Revolution

[ĐẶNG BẢO_GSM™]

RIFF JTAG - HTC Flyer, Routers, Sat Receivers . . .
06.04.2012 RIFF JTAG Updates

Whats new:

• RIFF JTAG Manager v1.42
• RIFF Box Firmware v1.32

Network Router support:

• LinkSys WRT54G Unbrick, Read/Write Flash

Satellite Receivers (STB-s):

• Orton 4100C Unbrick, Read/Write Flash
• EuroSky ES-4100 Unbrick, Read/Write Flash

HTC Phones support:

• HTC Flyer Boot repair, Unlock, CID, ModelID, S-Off, IMEI Update

HTC Phones bug fix and updates:

• HTC Sensation (HTC Pyramid) S-Off support added
• HTC Evo 3D (HTC Shooter) S-Off support added
• HTC Desire HD DBL reflash support added
  
• HTC Desire Z DBL reflash support added

RIFF Torrent Tracker updates:

• 06.04.2012 HTC_Working_Full_flash_Backups_06.04.2012_v2.torre nt

New HTC Full Backups torrent is uploaded and ready for seeding.

New files for following models: HTC 7 Pro (tested with hspl)
HTC Evo 3D (for Liteon camera)
HTC Desire HD (hboot 2.00 with fix for network problem)
HTC Sensation
HTC Kaiser
HTC Surround
HTC Incredible S

Complete list of files:

• 06.04.2012 Samsung_Full_flash_backups_06.04.2012_v2.torrent
  
  New files for many new models added.

www.riffbox.org

[TuấnPhát_GSM]

Repairing bricked HTC Flyer WiFi (PG41400) is easy with the RIFF Box. Phone is auto powered on with USB Data Cable connected to the PC while battery is connected. Please note, battery presense is required.
Some (or all) revisions of HTC Flyer boards have JTAG interface disabled (that is enable MARM JTAG Fuse is blown in the MSM8255 chip). In this case the JTAG may be enabled only by firmware itself. This is done by the DBL loader, so writing to DBL area is artificially disabled in the DCC Loader code. DCC Loader will discard all flashing attempts into DBL zone and will respond with success code as if flashing succeeded. In this way DBL zone is protected while user still can flash full image files seamlessly.
Resurrector will reflash radio’s boot zone (except DBL area) and will re-write PDA’s SPL to 1.11.0011 version. Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘PG4140000’.
There is option to reflash android BOOT and RECOVERY zones. Recovery zone is flashed with ClockworkMod Recovery 4.0.1.4. In addition, you can set S-OFF (unlock HBOOT so you will be able to flash any ROM) by selecting S-OFF HBOOT version in the resurrector settings.
Sometimes (for example after rooting attempts) phone has a modified DBL loader (which may not accept official HTC boot files). To restore phone functionality you need to reflash DBL loader. There is option to reflash DBL code (DBL area will be temporary unlocked for reflashing). But please note, reflashing DBL area is very dangerous, since in case flashing stops in the middle, you will have briked phone with permanently disabled JTAG interface.
Please note, if your phone has the DBL loader damaged and MCU has JTAG FUSE blown then there is no way to resurrect your phone via JTAG interface.

To resurrect HTC Flyer WiFi:

Solder JTAG cable to HTC Flyer JTAG pads;
Insert battery and connect USB Data cable;
Make sure HTC Flyer (PG41400) is selected in the list of models;
If you use only battery, press Power On key;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods. You can use CWM recovery to flash any ZIP file – for this during resurrection add BOOT & RECOVERY zones to be resurrected too.

To enter download mode:

Disconnect PC cable;
Insert battery;
Hold ‘Volume Down’ key and press ‘Power ON’ button.

[TuấnPhát_GSM]

24.04.2012 RIFF JTAG – HTC via USB Cable Support added


Whats new:

Released support for HTC phones based on MSM8x55 CPU, which are enumerated on USB port as “QHUSB_DLOAD” device. Now it’s possible to repair these phones without soldering any wires. Even without opening !

Following models are supported at the moment:

HTC Desire HD (HTC Ace)
HTC Desire S (HTC Saga)
HTC Desire Z (HTC Vision)
HTC Flyer 3G
HTC Flyer WiFi
HTC Evo View 4G

It is possible to force QHUSB_DLOAD mode by disabling Vdd line on eMMC chip. Check Desire S TP info for example. This means, You can work with any MSM8255/MSM8655 based HTC phone, as long as You force it into QHUSB_DLOAD mode.
Follow this procedure if You want to use these updates:

*Connect Your phone to USB port and install QHUSB_DLOAD device driver (C:\Program Files (x86)\RIFF Box JTAG Manager\Drivers\32Bit\QDLOADER)
*Launch JTAG Manager, select appropriate Model DLL and click desired button
*Install “RIFF Box DCCLoader USB Interface” port driver (C:\Users\Admin\Desktop\Drivers_64Bit_WorkedForMe\ Drivers\64Bit\DCCLDR)
*If req

uired, repeat the procedure (sometimes required if device is connected for first time)

We will release USB support for rest of the models on these CPU-s in following days.
To download and install new updates – simply click “Check for Updates” button on Box Service TAB.

[namnhatrang]

RIFF JTAG – HTC via USB more phones supported

by admin on Apr.27, 2012, under News

27.04.2012 RIFF JTAG – HTC via USB more phones supported

HTC Thunderbolt USB support added
HTC Sensation XL USB support added
HTC Inspire USB support added
HTC Incredible S USB support added
HTC Incredible 2 USB support added

These new updates will allow You to use USB cable to perform any operation on listed models. Remember that this work if Your phone is enumerated on USB port as QHUSB_Dload or Qualcomm HS-USB QDLoader device.
In case phone is not enumerated, You might need to use test point method first.

Please visit RIFF FAQ section to see how to install drivers, and how to find eMMC Vdd test points:

How to install QHUSB_DLOAD driver
How to install “RIFF BOX DCCLoader USB Interface Port” Windows 7 64bit driver

If You need to repair phone after replacing eMMC chip, these are the steps:

Launch eMMC MBR/EBR partitioning tool
Open desired partitioning file
Click “Load Image from file”
Click “Repartition eMMC”
Close the eMMC plugin
Click “Resurrection” and select all options to be repaired, including IMEI and CID
Click “Resurrect”

Please click “Check for updates” button to download and install new updates.

[ĐẶNG BẢO_GSM™]

RIFF JTAG-RIFF JTAG Manager v1.43 released

RIFF Box JTAG Manager software setup

This will install following files to Your computer:

• JTAG Manager software v1.43
• RIFF Box Firmware v1.32
• RIFF Box control port driver
• RIFF Box update port driver
• RIFF DCC USBLoader driver
• QUALCOMM QHUSB_DLOAD driver

After You execute setup, it will install all files to desired destination, and launch drivers installer script.
Take note, If You’re using Windows XP, You’ll have to provide drivers location to Hardware Installation Wizard after connecting devices for first time.


RIFF Box – JTAG Revolution

[ĐẶNG BẢO_GSM™]

11.05.2012 RIFF JTAG – Samsung SPH-D710 Galaxy S2 Epic Touch 4G (Samsung Within) Unbrick – dead boot repair supported


Repairing bricked Samsung SPH-D710 Galaxy S2 Epic Touch 4G is easy with RIFF Box. Samsung SPH-D710 is based on the S5PV310 (Exynos 4210) Processor (Cortex-A9 Dual-Core). JTAG pads are very small; professional experience in soldering is required to connect wires to the JTAG interface.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.
To resurrect Samsung SPH-D710:

• Solder JTAG cable to Samsung SPH-D710 JTAG pads;
• Connect USB cable to phone and PC;
• Insert battery;
• Make sure Samsung SPH-D710 is selected in the list of models;
• Make sure a fixed TCK frequency is selected;
• Click Resurrect button;
• Wait till software signals a successful operation completion;
• Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.
To enter download mode:

• Disconnect PC cable;
• Insert battery;
• Hold both ‘Volume Down’ and ‘Home’ keys and press Power-On.

.

[ĐẶNG BẢO_GSM™]

RIFF JTAG - Weekend Updates

18.05.2012 RIFF JTAG – Weekend updates:

Whats new:

• Samsung B7320 unbrick/boot repair support added
• HTC Sensation 4G (PG581000) Unbrick, Unlock, S-Off, SuperCID support added
• HTC Sensation (PG581300/PG583101) Unlock support added
• HTC Evo 3D Unlock support added

Bug Fix updates:

• HTC Desire HD Support for new board revisions with hboot 2.xx (No Network problem)
  
• HTC Wildfire S Proximity sensor fix

RIFF Torrent tracker:

• RiffBox Setup 18.05.2012 v1

Please click “Check for updates” button in RIFF JTAG Manager to download new files.

RIFF Box FAQ:

• RIFF JTAG Box FAQ - RIFF JTAG Error codes and troubleshooting
• RIFF JTAG Box FAQ - RIFF JTAG Box setup
• RIFF JTAG Box FAQ - JTAG Manager - DCC Read/Write TAB
• RIFF JTAG Box FAQ - How to use QUALCOMM eMMC MBR/EBR Partitioning plugin

[ĐẶNG BẢO_GSM™]

23.05.2012 RIFF JTAG – HTC 7 Surround T8788 (HTC Mondrian) Unbrick, Unlock, SuperCID and IMEI repair supported


Repairing bricked HTC Surround (PD26100) is easy with the RIFF Box. Phone is auto powered on with USB Data Cable connected to the PC while battery is connected.
In case you have no USB cable near, make sure battery is charged enough and hold Power On button during initiation of JTAG connection.
Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL to 0.74.1000 version. Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘PD26*****’.
To resurrect HTC Surround (PD26100):

• Solder JTAG cable to HTC Surround JTAG pads;
• Insert USB Data cable into board and PC;
• Make sure HTC Surround (PD26100) is selected in the list of models;
• If you use battery, press Power On key;
• Click Resurrect button;
• Wait till software signals a successful operation completion;
• Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
To enter download mode:

• Disconnect PC cable;
• Insert battery;
• Hold ‘Volume Down’ key and press ‘Power ON’ button.

.