RIFF BOX JTAG New Update AE Post ở đây

[HoangThong_hotrokythuat4]

JTAG Manager 1.38
---------------------------

Added feature to disable Target ID check during resurrection

If current ID is not supported by a DLL, user can switch off ID check and still be able to try resurrection.
Though, we don't recommend it. Do it only if you are sure what you're doing and if you're sure that device
with unmatched target ID is still exactly the same model as stated in DLL.
Please note, upon JTAG Manager exe startup this option is automatically switched off.

To disable Target ID do the following:

-> Box Service -> Advanced Settings -> Tick "Ignore TARGET IDCODE . . ."


Added preset "Erase Full NAND/NOR Memory" (for this use Settings by Code button)

DCC operations presets will ensure proper use of DCC TAB features. To select DCC Operation preset, do the following:


-> DCC Read/Write TAB -> Settings By Code -> Select desired preset



Firmware 1.29
---------------------------

MPCore targets handling is improved.

Fixed bug in the ARM7 handling routines: h/w breakpoints were disabled each time any halt operation was performed

Added auxiliary instruction which improves GDB Server functionality.

[HoangThong_hotrokythuat4]

29.12.2011 Samsung Galaxy Note (GT-i9220) Unbrick – Boot Repair Supported

Samsung I9220 AP (PDA Part) is based on the S5PV310 (Exynos 4210) Processor (Cortex-A9 Dual-Core). JTAG pads are very small; professional experience in soldering is required to connect wires to the JTAG interface.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.

To resurrect Samsung I9220 AP:

Solder JTAG cable to Samsung I9220 AP JTAG pads;
Connect USB cable to phone and PC;
Insert battery;
Make sure Samsung I9220 AP is selected in the list of models;
Make sure a fixed TCK frequency is selected;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

To enter download mode:

Disconnect PC cable;
Insert battery;
Hold both ‘Volume Down’ and ‘Home’ keys and press Power-On.