+ Trả lời bài viết
Trang 2 của 6 Đầu tiênĐầu tiên 1 2 3 4 5 6 CuốiCuối
Kết quả 11 tới 20 của 55

Hybrid View

  1. #1
    Thành viên danh dự TuấnPhát_GSM's Avatar
    Ngày tham gia
    Jan 2009
    Bài viết
    1,788
    Cám ơn !!!
    117
    Thanked 452 Times in 322 Posts

    Mặc định SETOOL v1.1202 UPDATE RELEASED

    v1.1202

    Code:
    -  no testpoint altbypass unlock procedure will work now for msm7227-based phones,which using MCUs with fixed security bug.   
      resurrection cables will NOT work for MCUs with fixed security bug. Because of this,  
       phones, which are already dead should be recovered using jtag box, which can write ORIGINAL semc boot. 
       big thanks for help and testing to electrolandgsm.
     -  switch to usb interface was broken for DB200x phones, fixed.
     -  added few models to list, so users can use profiles for them.
    RapidShare Link

  2. #2
    Thành viên danh dự TuấnPhát_GSM's Avatar
    Ngày tham gia
    Jan 2009
    Bài viết
    1,788
    Cám ơn !!!
    117
    Thanked 452 Times in 322 Posts

    Mặc định Setool New Update v1.1204 Released...

    v1.1204

    Code:
    - fixed "dead phone after unlock" for some latest j20 phones.
    - x10 with android firmware 2.3.3 supported for altbypass unlock
    - msm8x60 sony phones supported ( lt26,lt28,is12s,so-03d ). Standard operations supported - flash,trim area read/write.
      Network unlock only supported using s1 signature server, which is offline for us.
    - added support for one interesting activation.
    RapidShare Link

  3. ( TuấnPhát_GSM ) được 1 thành viên cảm ơn vì bài viết hữu ích!

    TuệNguyễn (29-03-2012)

  4. #3
    Thành viên danh dự TuấnPhát_GSM's Avatar
    Ngày tham gia
    Jan 2009
    Bài viết
    1,788
    Cám ơn !!!
    117
    Thanked 452 Times in 322 Posts

    Mặc định Setool v1.1280 Released. Check Inside...

    v1.1280

    Code:
    - fixed m1_aspen flashing
    - fixed flashing of ICS firmwares for 8x55 phones
    - removed java-based altbypass method for all a1 phones,except pnx5230-based phones.
    - reset-based unlock method is now standard altbypass unlock method for a1 phones.
      you can not use usb as interface for altbypass unlock on db2000,db2010-based phones anymore.
      you do not need restoration files,bypass files ( still need them for pnx5230-based phone ).
      and ... altbypass unlock is much quicker and quite "one-buttoned" now ;)
    - added x1 unlock via codes, all you need  -  enter IMEI on locks tab and press "request". Cost is 1 credit.
    due to major core rewrite, some bugs can appear in a1 phone service patterns, despite i checked all supported phones in different modes.
    if you will find problems, feel free to report them on forum.


    RapidShare Link

  5. ( TuấnPhát_GSM ) đã được 3 thành viên cám ơn vì bài viết hữu ích!

    ĐẶNG BẢO_GSM™ (19-04-2012), TuệNguyễn (19-04-2012), TUYHOAGSM™ (19-04-2012)

  6. #4
    Thành viên danh dự TuấnPhát_GSM's Avatar
    Ngày tham gia
    Jan 2009
    Bài viết
    1,788
    Cám ơn !!!
    117
    Thanked 452 Times in 322 Posts

    Mặc định Setool v1.1285

    - added quite complex, but working procedure to unlock last SEMC A2 phone, j108 cedar from network locks.
    beginners, stay away from this procedure.
    other users, welcome to faq for details. http://support.setool.net/showthread...ll=1#post83068
    - STE U8500 sony phones supported ( lt22,mt26,st25 ). Standard operations supported - flash,trim area read/write.
    Network unlock only supported using s1 signature server, which is offline for us.
    STE U8500 support was done blindly, should work, but need to be tested.
    https://rapidshare.com/files/2176817692/v1.1285.rar

    Successfully unlocked J108 Sony Ericsson J108 Unlock done With Setool.......
    J108 unlock done. 3 credits used
    Code:
    current updater version: 0.95
    current setool2 version: 1.1285
    SERVER CREDITS LEFT/USED: 50/190
    CARD COUNTERS: FLASH 193, UNLOCK 272
    Elapsed: 7 secs.
    SIGNED MODE (USING SERVER)
    CFG:100000000000
    ChipID: F100, EMP protocol: 0401
    PHONE DOMAIN: "RETAIL"
    PHONE CID: 0081
     
    OTP LOCKED: 1 CID: 81 PAF: 1 IMEI: 01248500 CERT: RED
    LDR: 2010-03-02 18:05 1212-4656_DB3350_CS_LOADER_ACC_SDRAM_R2A096
    LDR: 2010-03-02 18:06 1212-4655_DB3350_CS_LOADER_APP_SDRAM_R2A096
     
    Model (from GDFS): J108i
    MAPP CXC article: R7DA052     prg1239-0181_HUTCHISON_HO
    MAPP CXC version: R7DA052
    Language Package: HUTCH-WORLD
    CDA article: 1241-3443
    CDA version: R6A
    Default article: 1239-0196
    Default version: R7DA052
    PROVIDER: 272-05
    Network LOCKED
     
    SECURITY UNITS BACKUP CREATED.
    Elapsed: 18 secs.
    SIGNED MODE (USING SERVER)
    CFG:101000000000
    ChipID: F100, EMP protocol: 0401
    PHONE DOMAIN: "RETAIL"
    PHONE CID: 0081
     
    OTP LOCKED: 1 CID: 81 PAF: 1 IMEI: 01248500 CERT: RED
    LDR: 2010-03-02 18:05 1212-4656_DB3350_CS_LOADER_ACC_SDRAM_R2A096
    LDR CAPS: SYSTEM FLASH SIGNATURE AUTH 
    LDR: 2010-03-02 18:06 1212-4655_DB3350_CS_LOADER_APP_SDRAM_R2A096
    LDR CAPS: SYSTEM FLASH GDFS FILESYSTEM TA 
    writing "C:\Documents and Settings\vp\My Documents\GSM\Sony Ericsson\Setool\Setool SE J108\R7EA011.APP_SW_1239_0125_GENERIC_HO_REDBROWNBLUE_CID81_80_53_52_49_DB3350.SOFTWARE"
    ALLOWED DOMAINS: BLUE BROWN RED 
    MAXIMUM CID: 81
    Will flash 1009 blocks ...
    ssw file accepted
    writing "C:\Documents and Settings\vp\My Documents\GSM\Sony Ericsson\Setool\Setool SE J108\R7EA011.FS_BALTIC_HO_REDBROWNBLUE_CID81_80_53_52_49.SOFTWARE"
    ALLOWED DOMAINS: BLUE BROWN RED 
    MAXIMUM CID: 81
    Will flash 2161 blocks ...
    ssw file accepted
    using GENERIC phone customization
    tpa/preset/custom/CONTENT_DOWNLOAD_HOOK.itm
    tpa/preset/custom/FM_PICTURES_HOOK_3.itm
    tpa/preset/custom/FM_SOUNDS_HOOK_3.itm
    tpa/preset/custom/FM_THEMES_HOOK_3.itm
    tpa/preset/custom/FM_VIDEOS_HOOK_3.itm
    tpa/preset/custom/GAMES_HOOK_3.itm
    tpa/preset/custom/MC_MUSIC_HOOK_3.itm
    tpa/preset/custom/MC_PHOTO_HOOK_3.itm
    tpa/preset/custom/MC_VIDEO_HOOK_3.itm
    tpa/preset/custom/ORG_APPLICATIONS_HOOK_3.itm
    tpa/preset/custom/preloaded_config.xml
    tpa/preset/custom/SETT_RINGTONE_HOOK_1.itm
    tpa/preset/custom/SETT_SCREENSAVER_HOOK_1.itm
    tpa/preset/custom/SETT_STARTSHOW_HOOK_1.itm
    tpa/preset/custom/SETT_WALLPAPER_HOOK_1.itm
    tpa/preset/custom/Customize.xml
    Elapsed: 402 secs.
    SIGNED MODE (USING SERVER)
    CFG:101000000000
    SERVER CREDITS LEFT/USED: 50/190
    CARD COUNTERS: FLASH 194, UNLOCK 272
    Elapsed: 2 secs.
    SIGNED MODE (USING SERVER)
    CFG:101000000000
    ChipID: F100, EMP protocol: 0401
    PHONE DOMAIN: "RETAIL"
    PHONE CID: 0081
     
    OTP LOCKED: 1 CID: 81 PAF: 1 IMEI: 01248500 CERT: RED
    LDR: 2010-03-02 18:05 1212-4656_DB3350_CS_LOADER_ACC_SDRAM_R2A096
    LDR: 2010-03-02 18:06 1212-4655_DB3350_CS_LOADER_APP_SDRAM_R2A096
     
    Insert Memory CARD into phone
    Insert TEST SIM CARD into phone
    POWER ON phone
     
    After setup complete, POWER OFF phone
    Then proceed to Step 2
     
    Elapsed: 40 secs.
    SIGNED MODE (USING SERVER)
    CFG:101000000000
    ChipID: F100, EMP protocol: 0401
    PHONE DOMAIN: "RETAIL"
    PHONE CID: 0081
     
    OTP LOCKED: 1 CID: 81 PAF: 1 IMEI: 0124850 CERT: RED
    LDR: 2010-03-02 18:05 1212-4656_DB3350_CS_LOADER_ACC_SDRAM_R2A096
    LDR: 2010-03-02 18:06 1212-4655_DB3350_CS_LOADER_APP_SDRAM_R2A096
     
    Insert Memory CARD into phone
    Insert TEST SIM CARD into phone
    POWER ON phone
     
    After setup complete, POWER OFF phone
    Then proceed to Step 2
     
    Elapsed: 16 secs.
    SIGNED MODE (USING SERVER)
    CFG:101000000000
    ChipID: F100, EMP protocol: 0401
    PHONE DOMAIN: "RETAIL"
    PHONE CID: 0081
     
    OTP LOCKED: 1 CID: 81 PAF: 1 IMEI: 01248500 CERT: RED
    LDR: 2010-03-02 18:05 1212-4656_DB3350_CS_LOADER_ACC_SDRAM_R2A096
    LDR: 2010-03-02 18:06 1212-4655_DB3350_CS_LOADER_APP_SDRAM_R2A096
     
    Insert Memory CARD into phone
    Insert TEST SIM CARD into phone
    POWER ON phone
     
    Set "USB MODE" in phone settings to "File transfer"
    Copy file from card folder other\executor.b to :
    C:\Documents and Settings\vp\Desktop\GSM\Sony Ericsson\Setool\v1.1285\backup\01248500
    POWER OFF phone
    Then proceed to Step 3
     
    Elapsed: 13 secs.
    SIGNED MODE (USING SERVER)
    CFG:101000000000
    ChipID: F100, EMP protocol: 0401
    PHONE DOMAIN: "RETAIL"
    PHONE CID: 0081
     
    OTP LOCKED: 1 CID: 81 PAF: 1 IMEI: 01248500 CERT: RED
    Checking for signature ...
    Waiting for calculation process ...
    RESPONSE: "SUCCESS" [1038]
    LDR: 2010-03-02 18:05 1212-4656_DB3350_CS_LOADER_ACC_SDRAM_R2A096
    LDR: 2010-03-02 18:06 1212-4655_DB3350_CS_LOADER_APP_SDRAM_R2A096
    DISCONNECT PHONE NOW
    INSERT SIM CARD, FULLY TURN PHONE ON AND ATTACH AGAIN
    INSTALL PHONE MODEM DRIVERS IF NEEDED
     
    SEARCHING FOR PHONE, "STOP" TO ABORT
    PHONE FOUND AT COM170
    PHONE READY TO PROCEED
    EXECUTOR STARTED
    SEARCHING FOR PHONE, "STOP" TO ABORT
    PHONE FOUND AT COM170
    PHONE READY TO PROCEED.
    GOT SEED: 00A04187
    ACTIVATION COMPLETED. USERCODE RESET TO "0000"
    DO NOT DISCONNECT PHONE FROM CABLE
    UNTIL PHONE TURNS ON BY ITSELF
    Elapsed: 199 secs.
    SIGNED MODE (USING SERVER)
    CFG:101000000000
    SERVER CREDITS LEFT/USED: 47/193
    CARD COUNTERS: FLASH 194, UNLOCK 272
    Elapsed: 2 secs.

  7. #5
    Thành viên danh dự TuấnPhát_GSM's Avatar
    Ngày tham gia
    Jan 2009
    Bài viết
    1,788
    Cám ơn !!!
    117
    Thanked 452 Times in 322 Posts

    Mặc định setool v1.1289 Released

    v1.1289

    - fixed android-based unlock, daemon not started on some systems
    - fixed credits loss issue, when user unlocking s1_open phone and s1 server became busy in the middle of process


    RapidShare Link

  8. #6
    Thành viên danh dự TuấnPhát_GSM's Avatar
    Ngày tham gia
    Jan 2009
    Bài viết
    1,788
    Cám ơn !!!
    117
    Thanked 452 Times in 322 Posts

    Mặc định Setool New Update v1.1291 Released...

    v1.1291

    Code:
    - msm7227,qsd8250 altbypass unlock using USB was broken somehow. fixed. greatly sorry.
    - backup folder will be created now for j108 bypass during step 2, no need to make identify before procedure now.
    - pnx5230 altbypass unlock could kill some phones ( theoretically ). fixed.
    RapidShare Link

  9. #7
    Executive Administrator TUYHOAGSM™'s Avatar
    Ngày tham gia
    Oct 2007
    Địa điểm
    TP.Tuy Hòa
    Tuổi
    47
    Bài viết
    1,464
    Cám ơn !!!
    385
    Thanked 1,110 Times in 513 Posts

    Arrow Setool V1.107

    Setool V1.107

    - gemalto TOP cards supported from now on
    - SmartCard update required to use that and following setool2 versions

  10. ( TUYHOAGSM™ ) được 1 thành viên cảm ơn vì bài viết hữu ích!

    hoangdaika (05-12-2012)

  11. #8
    Technical Assistance GIALAI_GSM's Avatar
    Ngày tham gia
    Dec 2009
    Địa điểm
    GIALAI
    Bài viết
    2,863
    Cám ơn !!!
    413
    Thanked 1,159 Times in 713 Posts

    Mặc định

    Se tool testing version v1.1094 ( x10i,x10a,so-01b)
    anybody with locked or not locked x10i,x10a,so-01b, please come here.

    Greetings.

    lets make some tests.

    1.
    make sure your x10i,x10a have standard semc android 2.1 firmware.
    if not, flash such firmware.

    2.
    go to
    menu->settings->applications->development->enable usb debugging, check it.
    install "adb drivers" ( drivers\adb_drivers\x10_drivers )

    3.
    power off phone.

    go to pda tab, select x10 as model, on options check "signed mode,altbypass mode,do full unlock instead usercode reset", fill any valid username/password.

    press unlock.

    when prompted detach phone, turn it on fully, connect it again.
    ( or you can leave phone on cable, then power it on manually )

    DO NOT DETACH PHONE FROM AFTER PROCEDURE STARTED, YOU CAN KILL YOUR PHONE, ONLY RIFF JTAG WILL HELP
    DO NOT REMOVE BATTERY FROM PHONE AFTER PROCEDURE STARTED, YOU CAN KILL YOUR PHONE, ONLY RIFF JTAG WILL HELP

    https://rapidshare.com/files/573768306/v1.1094.rar

    please take in account, that it is testing version, it works for my x10, however, we should test it on other phones.
    ( during testing period, 0 credits required to unlock x10i using altbypass method. )

    originally posted by

    the_laser

    br.DYNET
    mobile services
    NHƯ HẠ
    129 Hùng Vương KrôngPa Gia Lai
    yahoo: gialai_gsm
    http://opi.yahoo.com/online?u=gialai_gsm&m=g&t=2http://saigonmobile.vn/images/misc/im_yahoo.gif

  12. ( GIALAI_GSM ) đã được 2 thành viên cám ơn vì bài viết hữu ích!

    hoangdaika (05-12-2012), Tempb (11-07-2011)

  13. #9
    Technical Assistance GIALAI_GSM's Avatar
    Ngày tham gia
    Dec 2009
    Địa điểm
    GIALAI
    Bài viết
    2,863
    Cám ơn !!!
    413
    Thanked 1,159 Times in 713 Posts

    Mặc định

    SETOoL v1.1094; 11/JULY/2011
    v1.1094



    - finally sorted all issues with samsung cid26 emp-based phones.
    - added x10i,x10a,so-01b unlock using alternative security bypass. check FAQ post for all details.
    during promo period, cost is 0 ( zero ) credits. Promo period can be extended to forever.
    - support area can only be access from now on by using setool2 >= v1.1094
    - fixed many minor and major bugs.

    Download LINK: https://rapidshare.com/#!download|13...C3E7F08390BD39

    DISCUSSIONS: SETOoL v1.1094; 11/JULY/2011

    Br
    HASSAN
    MABROUK-GSM
    UGANDA
    mobile services
    NHƯ HẠ
    129 Hùng Vương KrôngPa Gia Lai
    yahoo: gialai_gsm
    http://opi.yahoo.com/online?u=gialai_gsm&m=g&t=2http://saigonmobile.vn/images/misc/im_yahoo.gif

  14. ( GIALAI_GSM ) đã được 2 thành viên cám ơn vì bài viết hữu ích!

    hoangdaika (05-12-2012), HoangThong_hotrokythuat4 (12-07-2011)

  15. #10
    Technical Assistance GIALAI_GSM's Avatar
    Ngày tham gia
    Dec 2009
    Địa điểm
    GIALAI
    Bài viết
    2,863
    Cám ơn !!!
    413
    Thanked 1,159 Times in 713 Posts

    Mặc định

    News SETOOL x10i,x10a
    be content to know, that we plan to finish promo period for x10i,x10a altbypass unlock at monday, 18.11.2011.
    after that, price for x10i,x10a altbypass unlock will be 4 credits.

    ps.

    if "evil competitors" will do stupid steps, promo will be extended.



    __________
    XcachorroX
    mobile services
    NHƯ HẠ
    129 Hùng Vương KrôngPa Gia Lai
    yahoo: gialai_gsm
    http://opi.yahoo.com/online?u=gialai_gsm&m=g&t=2http://saigonmobile.vn/images/misc/im_yahoo.gif

  16. ( GIALAI_GSM ) được 1 thành viên cảm ơn vì bài viết hữu ích!

    hoangdaika (05-12-2012)

+ Trả lời bài viết

Thread Information

Users Browsing this Thread

Hiện có 3 người đang xem bài này . Bao gồm : 0 thành viên và 3 khách

     

Similar Threads

  1. Z3X BOX LG New Update
    By TuấnPhát_GSM in forum Z3X-BOX FOR LG
    Trả lời: 133
    Bài viết cuối: 19-03-2021, 09:27
  2. Trả lời: 43
    Bài viết cuối: 07-08-2014, 09:15
  3. MT Box New Update AE Post ở đây !!!
    By HoangThong_hotrokythuat3 in forum MT-Box
    Trả lời: 35
    Bài viết cuối: 23-11-2011, 08:07
  4. Trả lời: 5
    Bài viết cuối: 22-09-2011, 11:28
  5. CPF Box II New Update AE Post ở đây
    By TuấnPhát_GSM in forum CPF-BOX Ⅱ
    Trả lời: 7
    Bài viết cuối: 06-08-2011, 15:31

Quyền viết bài

  • Bạn không thể tạo chủ đề mới
  • Bạn không thể gửi trả lời
  • Bạn không thể gửi đính kèm
  • Bạn không thể sửa bài viết của bạn
Lên đầu trang
thiet bi sua chua slim sim, heicard, sim ghep Firmware android giải pháp nhà thông minh