[Xin giúp] nokia 105 rm-908 tại sao chạy lại phần mềm bằng box ATF báo lỗi thế nhỉ?

[chi lê hoàng]

VBATT Powering Down <<<<
VBATT Powering Up >>>>
SET VCCIO Level Done
SET BSI Load Done

Booting Phone...
CPU ID Response: A200341100
CPU Type: XG110 2.1B
Phone Booted at after First attempt...

************************************************** ****
TIME STARTS HERE
************************************************** ****


Sending PBL 19456 bytes...
PBL Successfully Sent...

Sending SBL 65024 bytes...
SBL Successfully Sent...

Flash Chip Manufacturer: Spansion Electronics Corp.
Flash Chip Type: 64 Mbit (4Mb x 16) NOR
Extended Information: Mirrorbit / Multi-Bank / 1.8v

Processing Image File: C:\Documents and Settings\Administrator\My Documents\Downloads\rm-908\rm908_004.350

Data Block Found...
Number of Sections: 03
IMAGE Certificate Block Sent Successfully...
Processing Section 01 of 03
IMAGE Erase Block: 0x00000000~0x0001FFFE
ERROR: Erase IMAGE Block Failed !!!
Flashing ERROR

ERROR : PHONE READ INFO FAILED

em đã thử mấy file rồi vẫn bị thế ( ai giúp e với

[quangtrongmobile]

kiếm file chuẩn đi...v4.35 thì hình như là toàn bi lổi như vậy

[chi lê hoàng]

bbanrbao nhieu thì không bị lỗi ạ.cái có pót link e vs

[quangtrongmobile]

qua yahoo sen cho....quangtrongmobile1