S-Card v1.02, SmartMoto v2.03 & Smart-Clip v3.02

[taihv™]

Dear users,
We are pleased to introduce new versions of S-Card v1.02, SmartMoto v2.03 & Smart-Clip v3.02
With this release we announce a new step in unlocking, flashing and repairing technologies.
From now on, all procedures for majority of the latest models can be performed

without disassembling and making a TestPoint connection.

The following models can be served avoiding a TestPoint connection:


C390 BL up to 8.26
E1 BL up to A.02
L2 BL up to 8.D0
L6 BL up to 8.D0
L7 BL up to 8.D0
L7 BL up to A.20
U6 BL up to 8.A1
V190 BL up to 8.A0
V190 BL up to 8.D0
V235 BL up to 8.E0
V360 BL up to 8.A0
V360 BL up to 8.D0
V3i BL up to A.30
V3r BL up to A.30

Please, be aware of the new unlock procedure:
- Connect the handset to PC via Smart-Clip (phone > USB cable > Smart-Clip > LPT cable > PC).
- Connect S-Card to PC USB port.
- Connect power supply to Smart-Clip and power on the handset.
- Launch SmartMoto.
- Choose "Smart-Clip USB port" in phone connection window.
- Press "Search". The software should perform the following steps:
+ SmartMoto detects S-Card;
+ SmartMoto detects Smart-Clip;
+SmartMoto detects the handset and reads all phone information.
- Log to bookmark "Prepare".
- Select the appropriate model from SmartMoto list. Make sure that phone model and boot version of the phone to be unlocked exactly match the model and boot version stated in the list.
- For unlock purposes, please make sure that “Unlock automatically” option is mark.
- Press “Prepare” button.
- Part of phone firmware gets reflashed. At this time popup window appears at SmartMoto interface. Please follow the instructions provided therein:
+ Disconnect cable from the phone;
+ Remove and insert phone’s battery;
+ Press "Power on" key on the phone;
+ Connect cable to the phone.
+ The handset should restart in boot mode.
If the option “Unlock automatically” was marked – the handset becomes unlocked. If the option was not selected then:
- The phone can be unlocked by logging to the bookmark “Unlock”, selecting the appropriate model and simply pressing “Unlock via TestPoint”;
- The phone can be repaired by logging to the bookmark “Repair”, selecting an appropriate model and pressing “Repair PDS”;
- The phone can be flashed by logging to the bookmark flash and performing a “Flash” procedure.
- Log to bookmark “Flash”.
- The phone has to be flashed with an appropriate firmware.
After flash is completed, disconnect the handset.

NOTE
Please remember to update Smart-Clip first and perform S-Card update after that only.

If you wish to receive news on updates immediately, please subscribe to our SMS notification system.

Smart-Clip ON!
-----------
Không chịu kém MSS4 là mấy, tuy nhiên user VN vẫn phải chờ, vì chưa có S-card!