Update cyclonebox anh em vui long post ở đây nhé

[ĐẶNG BẢO_GSM™]

Cyclone Box USB 3.0 Bootloader v3.00 Released
Hi, new Bootloader for Cyclone Box is ready!

What's new?
- Built from scratch
- More startup stability
- Much better smartcard initialization routines
- 2x faster (previous boot main fw update - ~20secs, new one ~11secs)
- USB 3.0 Compatibility == 4x faster from Initial Bootloader!

Upgrade box using new bootloader, usb 3.0 mode

Box Maintenance procedure started at 16:21:42
Handling device: [Cyclone Team], [Cyclone Bootloader], [Platform: Classic]
Bootloader: Cyclone Classic Common Bootloader v3.00, (Apr 6 2012 16:14:55)
Service Tag: 0D1BB140D1F7F2475586D877E7357B6E
Connecting to Cyclone Server
Cyclone Server (2.0.0.4), Cyclone Box Team 2008-2011 - Ready.
========= Box Info =========
Box SN: C000xxx
HW Revision: B, Suitable for: Production, Case: 2011 - New Casing, MCU Manufacture Time: 2009, wk23 / wk19
Set: Classic Box, TX2 Adapter, 100 Credits, 6 Months Warranty
Box registration status: Registered OK
Paired Card SN: xxx
First Name: xxx
Surname: xxx
Nickname: xxx
Address: xxx
Country: xxx
E-Mail: xxx
Reseller: GPGIndustries, China
Warranty Start Date: 2012-02-16
Warranty Period (months): 6
Warranty Stop Date: 2012-08-16
Warranty active: Yes
============================
Updating Security Area...
Security Area Updated, Took: 0.31s
Updating Main Firmware...
Main Firmware Updated, Took: 6.240s
Updating COM Emulator Firmware...
COM Emulator Firmware Updated, Took: 0.390s
Updating Secure Bootloader...
Handling device: [Cyclone Team], [Cyclone Bootloader], [Platform: Classic]
Handling device: [Cyclone Team], [Cyclone Box], [Platform: Classic]
Firmware: Cyclone Nokia/Blackberry Application v01.89, (Mar 29 2012 16:06:54, gcc v4.3.3, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2011
Boot Agent: Cyclone Secure BootAgent Server v3.01 (C) KarwosSoft 2010 wk41
Bootloader is already Up-to-date
Secure Bootloader Update Skipped
Disconnected from Cyclone Server
Box Maintenance finished successfully

USB 2.0 Mode

Box Maintenance procedure started at 16:24:19
Handling device: [Cyclone Team], [Cyclone Bootloader], [Platform: Classic]
Bootloader: Cyclone Classic Common Bootloader v3.00, (Apr 6 2012 16:14:55)
Service Tag: 0D1BB140D1F7F2475586D877E7357B6E
Product: Classic
Connecting to Cyclone Server
Cyclone Server (2.0.0.4), Cyclone Box Team 2008-2011 - Ready.
========= Box Info =========
Box SN: xxx
HW Revision: B, Suitable for: Production, Case: 2011 - New Casing, MCU Manufacture Time: 2009, wk23 / wk19
Set: Classic Box, TX2 Adapter, 100 Credits, 6 Months Warranty
Box registration status: Registered OK
Paired Card SN: xxx
First Name: xxx
Surname: xxx
Nickname: xxx
Address: xxx
Country: xxx
E-Mail: xxx
Reseller: GPGIndustries, China
Warranty Start Date: 2012-02-16
Warranty Period (months): 6
Warranty Stop Date: 2012-08-16
Warranty active: Yes
============================
Updating Security Area...
Security Area Updated, Took: 0.94s
Updating Main Firmware...
Main Firmware Updated, Took: 11.575s
Updating COM Emulator Firmware...
COM Emulator Firmware Updated, Took: 0.749s
Updating Secure Bootloader...
Handling device: [Cyclone Team], [Cyclone Bootloader], [Platform: Classic]
Handling device: [Cyclone Team], [Cyclone Box], [Platform: Classic]
Firmware: Cyclone Nokia/Blackberry Application v01.89, (Mar 29 2012 16:06:54, gcc v4.3.3, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2011
Boot Agent: Cyclone Secure BootAgent Server v3.01 (C) KarwosSoft 2010 wk41
Bootloader is already Up-to-date
Secure Bootloader Update Skipped
Disconnected from Cyclone Server
Box Maintenance finished successfully

Just upgrade your box using Box Maintenance.

Join us on facebook: Cyclone Box | Facebook

CYCLONE BOX - POWER ON AND UPGRADE!

Stay tuned

Best Regards,
Cyclone Team

[hungthinhmobi]

Cyclone 2012 New Release Installer v1.20 CycloneBox Reloaded Launched and new Installer v1.20 This image has been resized. Click this bar to view the full image. The original image is sized 900x2092.

Cyclone Box Reloaded
Some More Basic Information :
- USB Bus powered only, 5V @ 500mA (2.5W)
- USB 1.0, 1.1, 2.0 and 3.0 Compatible
- Supported Operating Systems: All NT based Windows OS (including x86 and x64 platforms - drivers signed for 64bit) - this includes Windows NT, Windows Xp, Windows Vista, Windows 7, and upcoming
ones
- Lightweight construction
- Smartcard Connector
- Nokia Flashbus / FBUS RJ48 connector with TX and RX signalling LED. Pinout is UFS/JAF compatible (no need adapters anymore, plug it straight).
- Based on well-tested AVR32 technology in Cyclone Classic, powered by 66MHz 32bit RISC cpu
- Built-in VPP generator for old NOR based phones
- USB signalling led (USB transaction signalling)
- VBAT singalling led (power-up status of Flashbus port)
- Works also as USB dongle for USB-only operations, if USB connectivity with Nokia phones is needed
- Operates 100% standalone (after initial registration)

New CycloneBox Installer v1.20 (03.05.2012)

Things which introduced in new Version

- New Faster and reliable Hw introduced(Cyclone Box Reloaded)
- New Loaders v11.50.00 added
- FastMM v4.99 Introduced
- MEP-40488-004 added
- Xgold113 (Dual-sim) RPL write support added- Project completly refactorized from scratch. Compiler changed from obsolete Delphi7 to Delphi2007. Just because of this, lots of stability and speed improvment gained.
- "News" added in main window
- "New Super Easy Downgrade" BB5 method added (Backup,flash,downgrade,restore rpl all just in one click)Tick in before-flash tasks
- Added Windows 7 interactive progressbar when minimized to tray. When software is minimized, you will notice status of current job: green progressbar - working, red progressbar - error, yellow-paused, etc
- Boot recovery added for all boxes during box wizard
- Added COD->NCK verification upon data generation
- After COD->NCK calculation, NCK codes are automatically stored inside COD file
- New Paths is now addded to default Flash Path Search table (C:\Users\xxxx\AppData... etc)
- Box wizard Added; this is all-in-one tool which will: repair, upgrade, activate, register, bootloader recovery, smartcard refill, bootloader upgrade, etc your box. Just one click.


Improvements

- No need anymore to tick "Old USB flashing method" manually, it's detected automatically
- When Windows 7 is detected, software is not hidden to tray
- Bootloader reverted to v2.13 (temporary solution, v3.01 will get back soon)
- Automatic smartcard refill when empty addded
- Software is redesigned now. To gain full funcionality YOU DON'T NEED run as "Admin". This means you can be ensured about our software quality and security - no hidden trojans (as happened before with other products).
- Splash updated
- Box Registration module removed (box wizard introduced)
- Box Maintenance module removed (box wizard introduced)
- Card Maintenance module removed (box wizard introduced)
- The paths is now updated on each sw startup
- Only one copy of Cyclone Box application can be launched now, this improves stability
- "cyclonebox.dll not found" message when no drivers installed changed to suitable message box asking to connect your box first time and install drivers
- Skin Stack Updated to v7.62


Bug Fixes

- Windows7 Permission issues fixed (needed "Run as admin" to work properly with autoupdate)
- Fixed Windows7 Save Paths/Settings problem
- BB5 loader problems when skin enbled (ROM refused...etc)
- Access violation on exit fixed
- CBUS Lost Handle Fixed
- "cyclonebox.dll not found" message when no drivers installed changed to suitable message box asking to connect your box first time and install drivers
- libeay/ssleay libraries updated to latest one, much more fast and stable
- NCK Code Sending fixed for SIMLOC30 phones (0x01 error)
- Fixed tray issues
- Autoupdate code is now checking for installed installer, if obsolete then asks for download latest version
- Improved RPL backup in USB mode (Custom Loader didn't reset phone to FlashMode, and some backups did contain Superdongle/Simlock data only)
- XGold/Blackberry Service "Credits" renamed to "Counter" (because it is a counter, not real fee-credits), as it puts too much confusion
- "security problem #1" solved on those who copied cyclonebox.dll before
- Fixed interrupted auto-update problems (after restart - this is not valid Win32 application)
- Minor changes and bugfixes

Important Notes

1. If you are using old (Classic) Cyclone Box and having old Card serial number (2009,2010) and after latest
bootloader upgrade, your box can't enter into bootloader mode, your box boot need Recovery. This will be proceeded AUTOMATICALLY, just use Box Wizard.
2. Box Maintenance, Box Registration, Card Maintenance are removed from this release
3. Your box having 3 update credits from now
4. Box Firmware v02.01 is required, so this update could be operational
5. Use "Box Wizard". This is one-click tool for box repair (boot recovery), upgrade, activation, registration, smartcard upgrade/initialization, and so on.
6. If you are using Windows 7, autoupdate in old version may fail (fixed already). In case download installer directly, or run SW with Admin privileges.
7. ALWAYS fresh installer you could find at:

http://www.karwos.hk/CycloneBoxInstaller.exe

8. Autoupdate after updating EXE should ask you for downloading and installing latest installer. If something will fail during Autoupdate process, just look at 7 and download Installer manually.



CycloneBox Classic and Reloaded Official Website
CYCLONE BOX - RELOADED


Cyclone Team Official Facebook page
www.facebook.com/cyclonebox

[ĐẶNG BẢO_GSM™]

WHAT ???????
YOU STILL DONT HAVE CYCLONEBOX RELOADED !!!
GET IT NOW JUST IN 59 USD ONLY

Some More Mind Bl0wing Updates on the way , So Stay tune as always


BR
Cyclone Team

[ĐẶNG BẢO_GSM™]

[20-05-2012]CycloneBox Reloaded BlackBerry Module Updated

Firmware v02.02 Released for Classic and Reloaded boxes!



-BlackBerry MEP-11534-010 Added (FIRST IN THE WORLD)!
- Support for MEP-09292-008 Fixed!


Just use “Box Wizard” to upgrade your box Firwmare!
Stay Tuned , Coming back Shortly with More Hot Stuff

BR
CycloneTeam

[ĐẶNG BẢO_GSM™]

Cyclone HOT Update, Nokia N9 SECURITY FUNCTIONS ADDED!!
Hi to all,

- Nokia N9 Security Code Read Added WITHOUT DATA LOSS, WORLD FIRST !!!
- Nokia N9 Phonet connectivity added, WORLD FIRST, you can now safetly read info from your phone like from normal BB5 phones...
- Nokia N9 SX4 Authorization Added, WORLD FIRST
- Nokia N9 Security Repair Added (SX4+PM), WORLD FIRST
- Nokia N9 Read ASK file via FBUS Added, WORLD FIRST
- Nokia N9 PM Read Added, WORLD FIRST
- Nokia N9 PM Write Added, WORLD FIRST
- Nokia N9 Factory Defaults Setting added without flashing, WORLD FIRST
- Nokia N9 Mode Change added (can switch to LoCAL/TEST mode now, WORLD FIRST)
- Nokia N9 Selftests Added, WORLD FIRST
- Nokia N9 Reset FBUS/KEY NCK Counter Reset ADDED, WORLD FIRST
- Nokia N9 Send NCK via FBUS Added, WORLD FIRST
- N9 OMPA3630 Boot Support Added
- Factory BB5 RPL Writing Fixed
- DCT4 BT Flashing Fixed on some BT HW (i.e. 12/11 for 6230i, thx Pulka for reporting)
- Fixed PM Read on some Phones
- Minor Changes and Bugfixes

Just run Cyclone and autoupdate module will update your installation.
Make sure you have latest installer installed.
Firmware update IS NOT NEEDED for this update.

Few tests, Security Code Read w/o data loss:

[Nokia N9 USB Phonet]: Port opened OK!
Security Code 12345
Attempts 00

SX4 Authorization (Make sure FORCE SX4 SERVER iss TICKED)

[Nokia N9 USB Phonet]: Port opened OK!
MCU Version Vp 92_11w21
MCU Date 26-05-11
Product RM-696 (Nokia RM-696)
Manufacturer (c) Nokia
IMEI 357923041454648
Mastercode 555726146
SX4 Status: Not authorized (74)
Started mutual authenthication with card...
Cyclone Server (2.0.0.42), Cyclone Box Team 2008-2012 - Ready.
Receiving Phone Seed 1...
Phone Seed 1 Received
Sending calculated Data 1, and expecting Seed 2...
Calculated Data 1 accepted, Phone Seed 2 Received
Sending calculated Data 2
Calculated Data 2 sent, Checking Authorization Status again
Authorization successfully finished!
Looking for Virgin PM In Database...
Virgin PM Not found in local database, obtain one (with fields 1 and 309) and write it using "Write PM" Button
Disconnected from Cyclone Server

And just basic read info...

[Nokia N9 USB Phonet]: Port opened OK!
MCU Version Vp 92_11w21
MCU Date 26-05-11
Product RM-696 (Nokia RM-696)
Manufacturer (c) Nokia
IMEI 357923041454648
Mastercode 555726146
IMEI Spare 3A75290314546404
IMEI SV 3375290314546404F0000000
CNT DFL61_HARMATTAN_10.2011.31-3.343.2.343
PSN CZG234989
Product Code 059L7Z9
Module Code 0204965
Basic Product Code 059G8V7
PSD 0000000000000000
WLAN MAC 04A82A204D8F
Bootcode 2.0.49
Camera 0b:0125:02
APE SW 10.2011.34.1.341.01.2, V 1.2.122, RM-696, (c) NOKIA.
APE Test V 1.2.122
APE HW 1507
APE BT 00060000060d0020
RETU 11
TAHVO 00
AHNE 21
Asic 0
HW Signature
Simlock Server
Simlock Key 2440700000000000
Simlock Profile 0000000000000003
Simlock Aux
Simlock IMEI
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [1,2] State: OPENED Type: GID Data: FFFF
Simlock [1,3] State: OPENED Type: GID Data: FFFF
Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [2,2] State: OPENED Type: GID Data: FFFF
Simlock [2,3] State: OPENED Type: GID Data: FFFF
Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [3,2] State: OPENED Type: GID Data: FFFF
Simlock [3,3] State: OPENED Type: GID Data: FFFF
Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [4,2] State: OPENED Type: GID Data: FFFF
Simlock [4,3] State: OPENED Type: GID Data: FFFF
Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [5,2] State: OPENED Type: GID Data: FFFF
Simlock [5,3] State: OPENED Type: GID Data: FFFF
Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [6,2] State: OPENED Type: GID Data: FFFF
Simlock [6,3] State: OPENED Type: GID Data: FFFF
Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [7,2] State: OPENED Type: GID Data: FFFF
Simlock [7,3] State: OPENED Type: GID Data: FFFF
Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Auto Selecting Flash Files on User Request...
[Nokia N9 USB Phonet]: Port opened OK!
Product Code: 059L7Z9
Scanning avaiable products...
Processing C:\Program Files (x86)\Nokia\Phoenix\Products\...
Processing C:\Users\karwos\Desktop\DP\...
Found 14 products, Filtering DCT4 Products - wait...
5 Products left after filtering. Ready.
Scanning avaiable products...
Processing C:\Program Files (x86)\Nokia\Phoenix\Products\...
Processing C:\Users\karwos\Desktop\DP\...
Found 14 products, Filtering BB5 Products - wait...
8 Products left after filtering. Ready.
This is Valid BB5 Product
Retrieving Variants for Product RM-696 - wait...
1 Variants Retrieved
No variant found with given Product Code, selecting first one

Join us on facebook: Cyclone Box | Facebook

Stay tuned,
More to come,
Cyclone Team

[hungthinhmobi]

Cyclone HOT Update, Nokia N9 World's First SECURITY FUNCTIONS ADDED!!

This image has been resized. Click this bar to view the full image. The original image is sized 760x352.
!!!!! World First Update !!!!!
- Nokia N9 Security Code Read Added WITHOUT DATA LOSS, WORLD FIRST !!!
- Nokia N9 Phonet connectivity added, WORLD FIRST, you can now safetly read info from your phone like from normal BB5 phones...
- Nokia N9 SX4 Authorization Added, WORLD FIRST
- Nokia N9 Security Repair Added (SX4+PM), WORLD FIRST
- Nokia N9 Read ASK file via FBUS Added, WORLD FIRST
- Nokia N9 PM Read Added, WORLD FIRST
- Nokia N9 PM Write Added, WORLD FIRST
- Nokia N9 Factory Defaults Setting added without flashing, WORLD FIRST
- Nokia N9 Mode Change added (can switch to LoCAL/TEST mode now, WORLD FIRST)
- Nokia N9 Selftests Added, WORLD FIRST
- Nokia N9 Reset FBUS/KEY NCK Counter Reset ADDED, WORLD FIRST
- Nokia N9 Send NCK via FBUS Added, WORLD FIRST
- N9 OMPA3630 Boot Support Added
- Factory BB5 RPL Writing Fixed
- DCT4 BT Flashing Fixed on some BT HW (i.e. 12/11 for 6230i, thx Pulka for reporting)
- Fixed PM Read on some Phones
- Minor Changes and Bugfixes

NOTE :
Just run Cyclone and autoupdate module will update your installation.
Make sure you have latest installer installed.
Firmware update IS NOT NEEDED for this update.
Few tests, Security Code Read w/o data loss :


Trích:
[Nokia N9 USB Phonet]: Port opened OK!
Security Code 12345
Attempts 00
SX4 Authorization (Make sure FORCE SX4 SERVER is TICKED)
Mã:
[Nokia N9 USB Phonet]: Port opened OK! MCU Version Vp 92_11w21 MCU Date 26-05-11 Product RM-696 (Nokia RM-696) Manufacturer (c) Nokia IMEI 357923041454648 Mastercode 555726146 SX4 Status: Not authorized (74) Started mutual authenthication with card... Cyclone Server (2.0.0.42), Cyclone Box Team 2008-2012 - Ready. Receiving Phone Seed 1... Phone Seed 1 Received Sending calculated Data 1, and expecting Seed 2... Calculated Data 1 accepted, Phone Seed 2 Received Sending calculated Data 2 Calculated Data 2 sent, Checking Authorization Status again Authorization successfully finished! Looking for Virgin PM In Database... Virgin PM Not found in local database, obtain one (with fields 1 and 309) and write it using "Write PM" Button Disconnected from Cyclone Server

And just basic read info...
Mã:
[Nokia N9 USB Phonet]: Port opened OK! MCU Version Vp 92_11w21 MCU Date 26-05-11 Product RM-696 (Nokia RM-696) Manufacturer (c) Nokia IMEI 357923041454648 Mastercode 555726146 IMEI Spare 3A75290314546404 IMEI SV 3375290314546404F0000000 CNT DFL61_HARMATTAN_10.2011.31-3.343.2.343 PSN CZG234989 Product Code 059L7Z9 Module Code 0204965 Basic Product Code 059G8V7 PSD 0000000000000000 WLAN MAC 04A82A204D8F Bootcode 2.0.49 Camera 0b:0125:02 APE SW 10.2011.34.1.341.01.2, V 1.2.122, RM-696, (c) NOKIA. APE Test V 1.2.122 APE HW 1507 APE BT 00060000060d0020 RETU 11 TAHVO 00 AHNE 21 Asic 0 HW Signature Simlock Server Simlock Key 2440700000000000 Simlock Profile 0000000000000003 Simlock Aux Simlock IMEI Simlock Key Cnt 0 Simlock FBUS Cnt 0 Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF Simlock [1,2] State: OPENED Type: GID Data: FFFF Simlock [1,3] State: OPENED Type: GID Data: FFFF Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF Simlock [2,2] State: OPENED Type: GID Data: FFFF Simlock [2,3] State: OPENED Type: GID Data: FFFF Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF Simlock [3,2] State: OPENED Type: GID Data: FFFF Simlock [3,3] State: OPENED Type: GID Data: FFFF Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF Simlock [4,2] State: OPENED Type: GID Data: FFFF Simlock [4,3] State: OPENED Type: GID Data: FFFF Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF Simlock [5,2] State: OPENED Type: GID Data: FFFF Simlock [5,3] State: OPENED Type: GID Data: FFFF Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF Simlock [6,2] State: OPENED Type: GID Data: FFFF Simlock [6,3] State: OPENED Type: GID Data: FFFF Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF Simlock [7,2] State: OPENED Type: GID Data: FFFF Simlock [7,3] State: OPENED Type: GID Data: FFFF Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF Auto Selecting Flash Files on User Request... [Nokia N9 USB Phonet]: Port opened OK! Product Code: 059L7Z9 Scanning avaiable products... Processing C:\Program Files (x86)\Nokia\Phoenix\Products\... Processing C:\Users\karwos\Desktop\DP\... Found 14 products, Filtering DCT4 Products - wait... 5 Products left after filtering. Ready. Scanning avaiable products... Processing C:\Program Files (x86)\Nokia\Phoenix\Products\... Processing C:\Users\karwos\Desktop\DP\... Found 14 products, Filtering BB5 Products - wait... 8 Products left after filtering. Ready. This is Valid BB5 Product Retrieving Variants for Product RM-696 - wait... 1 Variants Retrieved No variant found with given Product Code, selecting first one
Join us on facebook : Cyclone Box | Facebook

Stay tuned,
More to come,
Cyclone Team
Note: Flashing is not supported atm but will be added shortly; hash reading for the unlock the same.
__________________

[ThanhHaMobile™]

Hi, new firmware for Cyclone Box is ready.

What's new?
- Added support for Blackberry MEP-14896-006 - FIRST IN THE UNIVERSE

Just update your box using "Box Wizard".

[TuấnPhát_GSM]

Firmware v02.04 Released.

Added support for Blackberry MEP-27501-001
Added support for Blackberry MEP-09292-007

Just use Box Wizard to update your box

Stay tuned,
More to come,
Cyclone Box Team

[ĐẶNG BẢO_GSM™]

Hello,

What is Cycator?
This is software intended exclusivly for Cyclone Box Users which are also HW repair engineers.

Where from download?
Use Germany Server, it's in 'Cycator' Directory. Use WinRar for unpacking.

How to work with Cycator?
1. Launch Cycator SW.
2. Select Product (we will post list tomorrow, for example Tube is 5800Xm, Picollo is 6300, Picollino is 5130xm, etc). Current revision (11062012) support 69 products and PCB versions.
3. Now you can either select component from list:


and so on... and selected component will be shown on phone PCB.

second option is to write in combobox needed component number (i.e. R1400), or just Nokia Part Number.

Another option is just to point a component by mouse and on bottom-left you will see an exact component name

How it looks?


If the users will be happy, we will be constantly updating Cycator database.

[GIALAI_GSM]

[25.06.2012] Cyclone Box Installer v1.21 Released Hi to all, new Installer for Cyclone Box is ready to download.

What's new?

=====================
Installer v1.21
25.06.2012
=====================
- New BB5 FBUs/USB Loaders v12.08.00 Added
- Qualcomm Based Products support added (Lumia 800, 610, etc)
- Normal mode Flashing is supported
- Dead-mode flashing is supported
- Downgrade is supported
- Support for Multi-CNT Qulacomm Configurations
- Support secure-erase USER Area - this takes about 15-25 minutes
- Basic read info including battery information etc for Lumia products
- Automatic Variant selection for Lumia products
- Cross-flash is supported, if Public Key hash matches
- After connecting product in Normal mode, Zune drivers must be installed. Take them from C:\Program Files\Cyclone Box\Drivers\ZuneDrivers
- Flashing drivers will be installed automatically, however on some problems just install them manually from C:\Program Files\Cyclone Box\Drivers\LumiaFlashing
- Abort Button improved
- SX4 Default Database updated, added 30 new models
- Nokia Connectivity cables drivers updated to v7.1.78.0
- Minor changes and bugfixes

Small tests:
800 FF

If phone is alive, It will be automatically swithced to OSBL mode.
If software can't switch to OSBL mode, or phone is generally DEAD do folllowing:

1. Turn OFF device, wait 15 seconds afterwards
2. Eject USB cable, wait 10 seconds
3. Press and hold Volume-UP button
4. Insert USB Cable. OSBL should be booted.

Booting CMT...
[Nokia USB Connectivity]: WinUSB Port opened OK!
OSBL Details
Protocol: v1.1
Version: v257.6
Build: 12
Timestamp: 2012-02-17 14:40:05
OSBL Bootloader Ready
USB&UART Tracing set
[HA Auth] : Elevating permissions to RnD
Requested Auth Elevation Level: RnD
[HA Auth] : Challenge : 08F70ECD76F6E4EE142BE82BA00143C3E4BC91036680A62C2A 3EF07508099060B5BCAD7BA00D151307A006BB
[HA Auth] : Calculating SHA256-ECC Response...
[HA Auth] : ERROR, No HA dongle found, can't elevate, Ignore this message if you flash original Images
ESCO: Processing RM801_12w14_prod_generic_nokia_osbl.esco...
OSBL Certificate Details
Magic: WP70
Version: 0
Signer Server ID: 0x98031573
Signer Timestamp: 2012-04-06 09:40:02
Signer S/N: 1725
Signer User ID: 10275021
Auth Level: Care
Data Encryption: 0
Image Index: 1
Asic Index: 0
Type: Image Write
Hashtable Parsed OK
Sending Certificate...
Certificate Accepted...
[ASIC 0, Storage 4,1] Writing 936.552kB @ 0x000000000007D200
Write taken 0.437s (Average speed: 17556,36kBits/s)
ESCO: Processing RM801_12w14_prod_generic_adsp.esco...
OSBL Certificate Details
Magic: WP70
Version: 0
Signer Server ID: 0x98031568
Signer Timestamp: 2012-04-06 09:37:16
Signer S/N: 1735
Signer User ID: 10275021
Auth Level: None
Data Encryption: 1
Image Index: 3
Asic Index: 0
Type: File Write
Hashtable Parsed OK
Sending Certificate...
Certificate Accepted...
[ASIC 0, Storage 4,1] Writing File "adsp.mbn" (5.368MB)
Flushing...
Flushed OK
Write taken 7.847s (Average speed: 5730,02kBits/s)
ESCO: Processing RM801_12w14_prod_generic_amss.esco...
OSBL Certificate Details
Magic: WP70
Version: 0
Signer Server ID: 0x98031568
Signer Timestamp: 2012-04-06 09:40:01
Signer S/N: 1738
Signer User ID: 10275021
Auth Level: None
Data Encryption: 1
Image Index: 4
Asic Index: 0
Type: File Write
Hashtable Parsed OK
Sending Certificate...
Certificate Accepted...
[ASIC 0, Storage 4,1] Writing File "amss.mbn" (15.961MB)
Flushing...
Flushed OK
Write taken 24.243s (Average speed: 5515,28kBits/s)
ESCO: Processing RM801_12140_prod_760_01_boot.esco...
OSBL Certificate Details
Magic: WP70
Version: 0
Signer Server ID: 0x98022316
Signer Timestamp: 2012-04-20 12:32:28
Signer S/N: 1110
Signer User ID: 508009728
Auth Level: None
Data Encryption: 0
Image Index: 2
Asic Index: 0
Type: Image Write
Hashtable Parsed OK
Sending Certificate...
Certificate Accepted...
[ASIC 0, Storage 4,1] Writing 353.543MB @ 0x0000000010000000
Write taken 139.823s (Average speed: 21209,86kBits/s)
ESCO: Processing RM801_12w14_prod_generic_user_area_erase.esco...
OSBL Certificate Details
Magic: WP70
Version: 0
Signer Server ID: 0x98031573
Signer Timestamp: 2012-04-06 09:36:19
Signer S/N: 1719
Signer User ID: 10275021
Auth Level: None
Data Encryption: 0
Image Index: 6
Asic Index: 0
Type: Image Erase
Hashtable Parsed OK
Sending Certificate...
Certificate Accepted...
[ASIC 0, Storage 4,1] Erasing 0x000000003C000000-0x000000077DFFFFFF (29.32GB)
Erase taken 11.232s
Restoring Modem from BACKUP_RAMFS_IMAGE...
Restore OK
Restarting MCU...
All ESCO Images Processed Successfully
Reading info...
[Urządzenie kompozytowe USB]: WinUSB Port opened OK!
[Nokia USB Connectivity]: WinUSB Port opened OK!
MCU Version 1750.0805.8773.12140
MCU Date N/A
Product Lumia Series (Nokia Lumia Series)
Manufacturer (c) Nokia
IMEI 359289045145774
Mastercode 5573422330
Public ID 8F07A22B55784E8C893370340D947D55
Product Code 059M3C1
Basic Product Code 059J2N6
Module Code 0205051
NCSd Version 1.9
HW Version 112.1402.2.3
SW Version 1750.0805.8773.12140
PSN Number 0022D28AB
ESN 00000000
WLAN MAC 6CE9070E42230000
BT ID 6CE9071AEF6B000000000000
Battery Life 35%
Battery Cycle Count 65535
Battery Temperature 38.6C
Battery Voltage 3795mV
Battery Flags 297
Battery Standby Current -6mA
Battery Max Load Current -800mA
Battery Health 860
Battery Average Current -27mA
Battery Remaining Capacity 482mAh
Battery Full Charge Capacity 1394mAh
Read info thread finished, continuing...
Flashing Successfull!

610 FF

If phone is alive, It will be automatically swithced to OSBL mode.
If software can't switch to OSBL mode, or phone is generally DEAD do folllowing:

1. Turn OFF device, wait 15 seconds afterwards
2. Eject USB cable, wait 10 seconds
3. Press and hold Volume-UP button
4. Insert USB Cable. OSBL should be booted.

Booting CMT...
[Nokia USB Connectivity]: WinUSB Port opened OK!
Switching to RAW Mode...
[Nokia USB Connectivity]: WinUSB Port opened OK!
[Nokia USB Connectivity]: WinUSB Port opened OK!
OSBL Details
Protocol: v1.1
Version: v256.0
Build: 1
Timestamp: 2012-02-22 11:37:26
OSBL Bootloader Ready
USB&UART Tracing set
[HA Auth] : Elevating permissions to RnD
Requested Auth Elevation Level: RnD
[HA Auth] : Challenge : 501AFF8D3A1D2B693BD8FEC40C1C55C5CB7F7E7DAF2FF78CEA 254978752CF80142347C1C31C0AB751C001F38
[HA Auth] : Calculating SHA256-ECC Response...
[HA Auth] : ERROR, No HA dongle found, can't elevate, Ignore this message if you flash original Images
ESCO: Processing RM835_12w16_prod_generic_amss.esco...
OSBL Certificate Details
Magic: WP70
Version: 0
Signer Server ID: 0x98031568
Signer Timestamp: 2012-04-13 19:53:21
Signer S/N: 2315
Signer User ID: 10318699
Auth Level: None
Data Encryption: 1
Image Index: 4
Asic Index: 0
Type: File Write
Hashtable Parsed OK
Sending Certificate...
Certificate Accepted...
[ASIC 0, Storage 4,1] Writing File "amss.mbn" (18.229MB)
Flushing...
Flushed OK
Write taken 18.782s (Average speed: 8139,50kBits/s)
ESCO: Processing RM835_12w16_prod_generic_user_area_erase.esco...
OSBL Certificate Details
Magic: WP70
Version: 0
Signer Server ID: 0x98031573
Signer Timestamp: 2012-04-13 19:50:07
Signer S/N: 2312
Signer User ID: 10318699
Auth Level: None
Data Encryption: 0
Image Index: 6
Asic Index: 0
Type: Image Erase
Hashtable Parsed OK
Sending Certificate...
Certificate Accepted...
[ASIC 0, Storage 4,1] Erasing 0x000000004C000000-0x0000000795FFFFFF (29.160GB)
Erase taken 0.172s
ESCO: Processing RM835_12160_prod_296_01_boot.esco...
OSBL Certificate Details
Magic: WP70
Version: 0
Signer Server ID: 0x98030051
Signer Timestamp: 2012-04-19 06:27:32
Signer S/N: 953
Signer User ID: 2150079744
Auth Level: None
Data Encryption: 0
Image Index: 2
Asic Index: 0
Type: Image Write
Hashtable Parsed OK
Sending Certificate...
Certificate Accepted...
[ASIC 0, Storage 4,1] Writing 307.683MB @ 0x0000000028000000
Write taken 94.115s (Average speed: 27422,85kBits/s)
Restoring Modem from BACKUP_RAMFS_IMAGE...
Restore OK
Restarting MCU...
All ESCO Images Processed Successfully
Reading info...
[Urządzenie kompozytowe USB]: WinUSB Port opened OK!
[Nokia USB Connectivity]: WinUSB Port opened OK!
MCU Version 1066.0000.8773.12160
MCU Date N/A
Product Lumia Series (Nokia Lumia Series)
Manufacturer (c) Nokia
IMEI 359313043774250
Mastercode 551675110
Public ID 88B3433D92343DDEFFED8DFC7EF2952F
Product Code 059P4D7
Basic Product Code 059L3R3
Module Code 0205127
NCSd Version 1.9
HW Version 112.1569.1.0
SW Version 1066.0000.8773.12160
PSN Number 0468BC2AB
ESN 00000000
WLAN MAC 3C363D77083A0000
BT ID 3C363D75337A0000FFFFFFFF
Battery Life 29%
Battery Cycle Count 65535
Battery Temperature 29.3C
Battery Voltage 3787mV
Battery Flags 312
Battery Standby Current -3mA
Battery Max Load Current -500mA
Battery Health 356
Battery Average Current 142mA
Battery Remaining Capacity 381mAh
Battery Full Charge Capacity 1322mAh
Read info thread finished, continuing...
Flashing Successfull!

Where from download?
ALWAYS FRESH installer you can get at: http://www.karwos.hk/CycloneBoxInstaller.exe
Uninstalling old version is RECOMMENDED before installing this one, however not ordinary.
You don't need to download Installer MANUALLY. It will be downloaded automatically, if you are having some of last Cyclone build with autoupdate module.

Lumia Flashing drivers will be installed automatically (according to your CPU architecture).
However, ZUNE drivers (when you are attaching phone in Normal mode) need's to be installed Manually from C:\Program files\Cyclonebox\Drivers\ZuneDrivers. This you need to ONLY ONCE.

Firmware upgrade is not needed.

Join us on facebook: Cyclone Box | Facebook

Stay tuned,
Cyclone Team