Em nhận con 1200 máy không nhận sjm .e cho thử chạy trương trình thì thì báo lỗi .đây là log của e nó mn xem cho ý kiến .Thanks all
Driver: WinUSB, ver: 3.5.1.0
Module ver: 1.0.0.20251(25-02-2012), Library ver: 1.0.0.13946(25-02-2012)
Rpl backup already exist (C:\mobileEx\3.5\data\backup\35686802313081_BACK.r pl).
Processing MCU file: rh99_05.910
[DCT4,DCT4 ALGORITHM] size: 2.27 MB
Supported Ids: 2292
ASIC ID: 0x2292 [UPPCosto ver: 1.3]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0020 8828 [ST 58WR032FU,32 Mbits] page size: 64 K type: NOR area: 01000000-013FFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: AD7E B61A 1BBE 0BE2 7D58 6BE4 DBEE 6514
Algorithm: u3_st_i.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x4C30
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 0083132D:2984DA60
Area [01000000-0100FFFF] erased in 1.047 s
Area [01010000-013AFFFF] erased in 1 min 1.015 s
Area [013B0000-013EFFFF] erased in 4.359 s
Area [017C0000-017EFFFF] erased in 0.031 s
Area [01FC0000-01FEFFFF] erased in 0.031 s
Flash programming ...
Programming completed in 18.094 s
File Processed in 1 min 31.907 s
Processing CNT file: rh990_nai5.91mr
[DCT4,DCT4 ALGORITHM] size: 110.59 KB
Supported Ids: 2292
ASIC ID: 0x2292 [UPPCosto ver: 1.3]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0020 8828 [ST 58WR032FU,32 Mbits] page size: 64 K type: NOR area: 01000000-013FFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: AD7E B61A 1BBE 0BE2 7D58 6BE4 DBEE 6514
Algorithm: u3_st_i.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x4C30
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 0083132D:2984DA60
Area [01380000-013AFFFF] erased in 3.235 s
Flash programming ...
Programming completed in 0.891 s
Extracting Content Pack, File Server fake reply for CUI phone.
Content Pack extracted successfully in 0.141 s
File Processed in 20.515 s
Processing PPM file: rh99_05.91mr
[DCT4,DCT4 ALGORITHM] size: 1.13 MB
Supported Ids: 2292
ASIC ID: 0x2292 [UPPCosto ver: 1.3]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0020 8828 [ST 58WR032FU,32 Mbits] page size: 64 K type: NOR area: 01000000-013FFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: AD7E B61A 1BBE 0BE2 7D58 6BE4 DBEE 6514
Algorithm: u3_st_i.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x4C30
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 0083132D:2984DA60
Area [01240000-0124FFFF] erased in 1.062 s
Area [01250000-0137FFFF] erased in 20.109 s
Flash programming ...
Programming completed in 9.047 s
File Processed in 37.485 s
Total time for flashing process(boot+erase+write) was 2 min 29.922 s
Phone type: RH-99
SW version: V 5.91 27-03-09 RH-99 (c) NMP
Imei plain: 35686802313081-8
Product code: 0546862
Cellular system: GSM
ASIC ID: 0x2292, type: 11
Ppm Id: MR
Language Pack:
- not available.
Master code: 4603201624
SIMLOCK_DATA corrupted!


 
		
		 LinkBack URL
 LinkBack URL About LinkBacks
 About LinkBacks 
 
			
			
 
			 1200 cần mn giúp ......
 1200 cần mn giúp ......
				 Trả lời với trích dẫn
  Trả lời với trích dẫn


 
			
 
			
 
			 Được post bởi duchanh0885
 Được post bởi duchanh0885
					
 
			


