đây là log khi em chạy lại


Using device: HTI, FW ver: 00.50, SN: 00010C7B
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0
Module ver: 1.0.0.20713(27-03-2012), Library ver: 1.0.0.13992(27-03-2012)
Rpl backup already exist (C:\mobileEx\3.5\data\backup\35486802927658_BACK.r pl).
Processing MCU file: rh105_06.000
[DCT4,DCT4 ALGORITHM] size: 2.27 MB
Supported Ids: 2292
ASIC ID: 0x2292 [UPPCosto ver: 1.3]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0089 8872 [Intel 28F320W18,32 Mbits] page size: 64 K type: NOR area: 01000000-013FFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: AD7E B61A 1BBE 0BE2 7D58 6BE4 DBEE 6514
Algorithm: u3_intel.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x56A0
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 00D35FB3:2984DA60
Area [01000000-0100FFFF] erased in 0.610 s
Area [01010000-013AFFFF] erased in 35.062 s
Area [013B0000-013EFFFF] erased in 2.906 s
Area [017C0000-017EFFFF] erased in 0.031 s
Area [01FC0000-01FEFFFF] erased in 0.047 s
Flash programming ...
Programming completed in 21.453 s
File processed in 1 min 7.984 s
Processing CNT file: rh1050_nai6.00mr
[DCT4,DCT4 ALGORITHM] size: 139.50 KB
Supported Ids: 2292
ASIC ID: 0x2292 [UPPCosto ver: 1.3]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0089 8872 [Intel 28F320W18,32 Mbits] page size: 64 K type: NOR area: 01000000-013FFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: AD7E B61A 1BBE 0BE2 7D58 6BE4 DBEE 6514
Algorithm: u3_intel.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x56A0
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 00D35FB3:2984DA60
Area [01380000-013AFFFF] erased in 1.875 s
Flash programming ...
Programming completed in 1.328 s
Extracting Content Pack, File Server fake reply for CUI phone.
Content Pack extracted successfully in 0.140 s
File processed in 21.547 s
Processing PPM file: rh105_06.00mr
[DCT4,DCT4 ALGORITHM] size: 1.20 MB
Supported Ids: 2292
ASIC ID: 0x2292 [UPPCosto ver: 1.3]
SecondaryBoot: u3_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A8
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
FlashID0: 0089 8872 [Intel 28F320W18,32 Mbits] page size: 64 K type: NOR area: 01000000-013FFFFF
FlashID1: 0000 0001 [unused/removed]
ExtBUSC: AD7E B61A 1BBE 0BE2 7D58 6BE4 DBEE 6514
Algorithm: u3_intel.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x56A0
Supported Ids: 3040, 2292, 2293, 3162, 3166, 3168
Performing Flash Authentication ...OK
UEM ID: 00D35FB3:2984DA60
Area [01240000-0124FFFF] erased in 0.687 s
Area [01250000-0137FFFF] erased in 11.516 s
Flash programming ...
Programming completed in 11.547 s
File processed in 31.250 s
Total time for flashing process(boot+erase+write) was 2 min 0.797 s


Phone type: RH-105
SW version: V 6.00 30-09-09 RH-105 (c) NMP
Imei plain: 35486802927658-3
Product code: 0549905
Cellular system: GSM
ASIC ID: 0x2292, type: 11
Ppm Id: MR
Language Pack:
- not available.

Master code: 7050766002

Imei net: 35486802927658
Version: SIMLOCK SERVER
Provider: GSM Test Operator
Counter: 0/3, 0/10

CONFIG_DATA: 0010100000000000
PROFILE_BITS: 0000000000010002

BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
khi chạy đến file CNT thì chỉ chạy được 90% là nó chuyển sang file PPM