LinkBack URL
About LinkBacks
Nokia 105 lắp sim tắt nguồn, tự khởi động lại.
Nếu Anh em gặp trường hợp máy 105 lắp sim bị tắt nguồn, tự khởi động lại thì Falsh lại cho máy.
Chỉ cần Falsh 1 file MCU.RM-908-105_ver 3.10_Flash ok_ Không có Tiếng Việt - Tải về - 4shared _Lưu ý: Chỉ Flash 1 file MCU.
Nếu nạp cả 3 file trong bộ file này sẽ không có Tiếng Việt.
Còn nếu Flash file cao hơn 3.10 lên nguồn tối màn hình, chỉ sáng đèn bàn phím.
Code:VBATT Powering Down <<<< VBATT Powering Up >>>> SET VCCIO Level Done SET BSI Load Done Booting Phone... CPU ID Response: A200341100 CPU Type: XG110 2.1B Phone Booted at after First attempt... ****************************************************** TIME STARTS HERE ****************************************************** Sending PBL 19456 bytes... PBL Successfully Sent... Sending SBL 65024 bytes... SBL Successfully Sent... Flash Chip Manufacturer ID: 0x00EF Flash Chip Type: 64 Mbit (4Mb x 16) NOR Extended Information: Multi-Bank / 1.8v Processing Image File: C:\Documents and Settings\Thien Uy\Desktop\rm908_003.100 Checking Flash Image... Number of Sections: 03 IMAGE Certificate Block Sent Successfully... Processing Section 01 of 03 IMAGE Erase Block: 0x00800000~0x00A0FFFE Start Erasing... Erasing Please Wait... Block Erase Done... Preparing Data Blocks... Data Size: 2162688 bytes Data Checksum: 0551 Uploading Data Blocks to phone... IMAGE Data Blocks uploaded to phone... Processing Section 02 of 03 IMAGE Erase Block: 0x00C60000~0x00E8123E Start Erasing... Erasing Please Wait... Block Erase Done... Preparing Data Blocks... Data Size: 2232896 bytes Data Checksum: 89F6 Uploading Data Blocks to phone... IMAGE Data Blocks uploaded to phone... Processing Section 03 of 03 IMAGE Erase Block: 0x00FFC000~0x00FFC03E Start Erasing... Erasing Please Wait... Block Erase Done... Preparing Data Blocks... Data Size: 64 bytes Data Checksum: 0000 Uploading Data Blocks to phone... IMAGE Data Blocks uploaded to phone... Start Data Verification... (Please wait) Data Verification Successful... Exit Flash Mode Done... Time Elapse : 00:01:16 ****************************************************** You must Factory Reset the phone to enable the ringtones and other customized settings to work ****************************************************** Waiting For Phone to go Online... 5, 4, 3, 2, 1... MCU: V 03.10 29-05-13 RM-908 (c) Nokia IMEI: 358146052403341 Product Serial Number: 007D2BFAU Product Code : 059R488 Module Code : 0205453 Basic Production Code: 059Q858 PPM SW Version : V 02.70 22-02-13 RM-908 (c) Nokia MR ADSP Version : p V 02.70\n22-02-13\nRM-908\n(c) NMP\nmr MCU SW Version : V 03.10 29-05-13 RM-908 (c) Nokia HW Version : 3000 UEM Version : 1328 UPP Version : 8850 LCD Version : CMI:BEIHAIv01 ILI9163C ********** SIMLOCK INFO ********** CONFIG_DATA : 0010100000000000 PROFILE_BITS : 0000000000040002 ASIC : 11 PROVIDER : Default Test Operator Block [1] 1:Open 2:Open 3:Open 4:Open 5:Open Block [2] 1:Open 2:Open 3:Open 4:Open 5:Open Block [3] 1:Open 2:Open 3:Open 4:Open 5:Open Block [4] 1:Open 2:Open 3:Open 4:Open 5:Open Block [5] 1:Open 2:Open 3:Open 4:Open 5:Open Block [6] 1:Open 2:Open 3:Open 4:Open 5:Open Block [7] 1:Open 2:Open 3:Open 4:Open 5:Open ST_LCD_TEST : PASSED FACTORY SET TO : Full Factory Set OK FACTORY SET TO : User Data OK FACTORY SET TO : Leave Factory OK FACTORY SET TO : Service Center OK FACTORY SET TO : Software Upgrade OK FACTORY SET TO : Production Tune OK
Được post bởi Mr.Chi
