1200 chạy PM kô được !

[Hai_GSM_Pro]

em có 1200 check thì nhận dạng CPU và Flash nhưng kô hiện dòng chữ DONE ở dười . em xóa fullflash cũng không được , mà chạy Pm vào cũng không được mong anh em giúp

[Gsm Hưng yên]

bạn post cái log lên đây nha

[hung_79hn]

em có 1200 check thì nhận dạng CPU và Flash nhưng kô hiện dòng chữ DONE ở dười . em xóa fullflash cũng không được , mà chạy Pm vào cũng không được mong anh em giúp

Post cái log check lên đây anh em xem giúp pác

[sybenlove]

em có 1200 check thì nhận dạng CPU và Flash nhưng kô hiện dòng chữ DONE ở dười . em xóa fullflash cũng không được , mà chạy Pm vào cũng không được mong anh em giúp

1200 hay bị vụ này lắm nhe bạn, check ok hiện locanmode nhưng ko vào testmode được thì làm sao write pm được.hoặc check bị lổi củng vậy.
đổi sợ cáp khác good.hoặc
lấy miếng giấy che chân VPP trên cáp lại rồi check thử xem, rồi info cho về testmode sau đó write pm vào ok. còn không được nữa vui post log check lên cho ae tham khảo.

[haiquynhmobile]

1200 hay bị vụ này lắm nhe bạn, check ok hiện locanmode nhưng ko vào testmode được thì làm sao write pm được.hoặc check bị lổi củng vậy.
đổi sợ cáp khác good.hoặc
lấy miếng giấy che chân VPP trên cáp lại rồi check thử xem, rồi info cho về testmode sau đó write pm vào ok. còn không được nữa vui post log check lên cho ae tham khảo.

đúng vậy bạn pos cái log lên cho anh em sem mới giúp bbạn được bạn than nhé

[Hai_GSM_Pro]

em làm được rồi thay Flash ok luôn mỗi tội phai mua log

[tiepmobile]

có linh free log nè bạn


NHẮC NHỞ BẠN LẦN ĐẦU NHÉ !! BẠN ĐÃ PHẠM NỘI QUI! ( QUẢNG CÁO LINK KHÁC NHẦM MỤC ĐÍCH QUẢNG CÁO)

[Thinh_RicKy]

1200 hay bị vụ này lắm nhe bạn, check ok hiện locanmode nhưng ko vào testmode được thì làm sao write pm được.hoặc check bị lổi củng vậy.
đổi sợ cáp khác good.hoặc
lấy miếng giấy che chân VPP trên cáp lại rồi check thử xem, rồi info cho về testmode sau đó write pm vào ok. còn không được nữa vui post log check lên cho ae tham khảo.

không báo Done tức là chưa check OK sao mà Flash được bạn.
Làm theo cách syben love nhé. nhớ vụ unlock sumo không?

[k2mobile0601]

Power on the phone...
Reading imei...
351961033553379
Reading prodcode...
0546885
Booting phone...
MCU ID: 0x2292
Sending algo...
Algo is ready...
ASIC TYPE b
Saving...
Done!
Booting phone...
MCU ID: 0x2292
Sending algo...
Algo is ready...
P-key nokia module version 01.02
Reading...
Error loading cbus loader...
Connecting to phone...
Imei need to be 14 digits in length...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Switching to serial...
Powering the phone...
Reading...
MCU SW version: V 5.80
14-11-08
RH-99
(c) NMP
HW version: 2502
PCI version:
UEM version: 1328
UPP version: 8850
RFIC version: 0700
DSP version: ICPR62_08w31_UPP
LCD version: UNKWN: IDs:
00:ff:00
PPM version: V 5.80
14-11-08
RH-99
(c) NMP
MR
ADSP SW version: V 5.80\n14-11-08\nRH-99\n(c) NMP\nmr
Production serial number: IFP897416
Product code: 0546885
Module code: 0203402
Basic production code: 0571402
Flash code:
Order number:
Product specific data:
Long production SN:
ATO:
Default SN type:
IMEI plain: 351961033553379
IMEI spare to net: 3A 15 69 01 33 55 33 07
IMEI SV to net: 33 15 69 01 33 55 33 67 F8
Master Code: 0726245336
Failed reading simlock data...
Phone type: RH-99, Software version: 5.80, Language Pack: MR
User code: ÿ#

Searching for saved ini...
Checking for file C:\Program Files\ODEON\JAF\JAF_RH-99.ini
Saved INI not found, loading INI list...
Checking path: C:\Program Files\Nokia\Phoenix\Products\\
Searching for default location of ini...
Checking path: \Products\\
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\\
No ini files found...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Switching to serial...
Powering the phone...
Reading...
MCU SW version: V 5.80
14-11-08
RH-99
(c) NMP
HW version: 2502
PCI version:
UEM version: 1328
UPP version: 8850
RFIC version: 0700
DSP version: ICPR62_08w31_UPP
LCD version: UNKWN: IDs:
00:ff:00
PPM version: V 5.80
14-11-08
RH-99
(c) NMP
MR
ADSP SW version: V 5.80\n14-11-08\nRH-99\n(c) NMP\nmr
Production serial number: IFP897416
Product code: 0546885
Module code: 0203402
Basic production code: 0571402
Flash code:
Order number:
Product specific data:
Long production SN:
ATO:
Default SN type:
IMEI plain: 351961033553379
IMEI spare to net: 3A 15 69 01 33 55 33 07
IMEI SV to net: 33 15 69 01 33 55 33 67 F8
Master Code: 0726245336
Failed reading simlock data...
Phone type: RH-99, Software version: 5.80, Language Pack: MR
User code: ÿ#

Searching for saved ini...
Checking for file C:\Program Files\ODEON\JAF\JAF_RH-99.ini
Saved INI not found, loading INI list...
Checking path: C:\Program Files\Nokia\Phoenix\Products\\
Searching for default location of ini...
Checking path: \Products\\
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\\
No ini files found...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Done!
Backup IMEI zone...
Setting local mode...
Reading IMEI...
Reading IMEI data...
IMEI data corrupt...
Getting MCUID...
MCU ID: 0x2292
Reading flash chip detailes...
FLASH ID0: 88280020 <=> ST -> Type not in database Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 10
FLASH ID1: 00010000 <=> Flash -> not used Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 0
First 16 bytes: AD 7E B6 1A 1B BE 0B E2 7D 58 6B E4 DB EE 65 14
MCU ID: 0x2292
Boot is ready...
Algo is ready...
Loader is ready...
Erasing area: 01000000 - 01FFFFFF...
Done!
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RH-99\rh99_05.800
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RH-99\rh99_05.800
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RH-99\rh99_05.80mr
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RH-99\rh99_05.800
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RH-99\rh99_05.80mr
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RH-99\rh990_nai5.80mr
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Backing up PM Field 208 as RPL...
Setting local mode...
Failed! Aborting!
Failed to backup imei...
MCU: C:\Program Files\Nokia\Phoenix\Products\RH-99\rh99_05.800
Booting phone...
MCU ID: 0x2292
BOOT file: C:\Program Files\ODEON\JAF\Flash\u3_2nd.fia
Loader version: 04.46.01 -> Revision: 0007
Boot size is 0x09A8
Boot is ready...
FLASH ID0: 88280020 <=> ST -> Type not in database Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 10
FLASH ID1: 00010000 <=> Flash -> not used Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 0
First 16 bytes: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
Flash ID is 0x28882000
Flash loader is C:\Program Files\ODEON\JAF\Flash\u3_st_i.fia
Loader version: 04.46.01 -> Revision: 0007
Loader size is 0x4B38; Loader chk: df
Loader is ready...
P-key nokia module version 01.02
MSID: 842E693A82AA773C22E80D43B2
MSID decoded: 3E4EBAE900184BF4A9000000
FAID: 738C331D94F569E9CC88745A
Operation took 0 minutes 8 seconds...
Erasing...
Found 5 interval(s) to erase
Erasing area: 01000000 - 0100FFFF...
Erasing area: 01010000 - 013AFFFF...
Erasing area: 013B0000 - 013EFFFF...
Erasing area: 017C0000 - 017EFFFF...
Erasing area: 01FC0000 - 01FEFFFF...
Operation took 1 minutes 13 seconds...
Writing...
Perm. Data Restore OK
Operation took 0 minutes 14 seconds...
Restarting MCU...
PPM: C:\Program Files\Nokia\Phoenix\Products\RH-99\rh99_05.80mr
Booting phone...
MCU ID: 0x2292
BOOT file: C:\Program Files\ODEON\JAF\Flash\u3_2nd.fia
Loader version: 04.46.01 -> Revision: 0007
Boot size is 0x09A8
Boot is ready...
FLASH ID0: 88280020 <=> ST -> Type not in database Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 10
FLASH ID1: 00010000 <=> Flash -> not used Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 0
First 16 bytes: AD 7E B6 1A 1B BE 0B E2 7D 58 6B E4 DB EE 65 14
Flash ID is 0x28882000
Flash loader is C:\Program Files\ODEON\JAF\Flash\u3_st_i.fia
Loader version: 04.46.01 -> Revision: 0007
Loader size is 0x4B38; Loader chk: df
Loader is ready...
P-key nokia module version 01.02
MSID: 84CF077101D4008D883DA5F22B
MSID decoded: 3E4EBAE900184BF4A8000000
FAID: A305388CF2F62B4AAC430A42
Operation took 0 minutes 8 seconds...
Erasing PPM...
Found 2 interval(s) to erase
Erasing area: 01240000 - 0124FFFF...
Erasing area: 01250000 - 0137FFFF...
Operation took 0 minutes 23 seconds...
Writing...
Perm. Data Restore OK
Operation took 0 minutes 8 seconds...
Restarting MCU...
CNT: C:\Program Files\Nokia\Phoenix\Products\RH-99\rh990_nai5.80mr
Booting phone...
MCU ID: 0x2292
BOOT file: C:\Program Files\ODEON\JAF\Flash\u3_2nd.fia
Loader version: 04.46.01 -> Revision: 0007
Boot size is 0x09A8
Boot is ready...
FLASH ID0: 88280020 <=> ST -> Type not in database Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 10
FLASH ID1: 00010000 <=> Flash -> not used Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 0
First 16 bytes: AD 7E B6 1A 1B BE 0B E2 7D 58 6B E4 DB EE 65 14
Flash ID is 0x28882000
Flash loader is C:\Program Files\ODEON\JAF\Flash\u3_st_i.fia
Loader version: 04.46.01 -> Revision: 0007
Loader size is 0x4B38; Loader chk: df
Loader is ready...
P-key nokia module version 01.02
MSID: 84C9254184C9E701C3A198D731
MSID decoded: 3E4EBAE900184BF4AA000000
FAID: 4BB182605C32B9CB0595F675
Operation took 0 minutes 8 seconds...
Erasing Content Pack...
Found 1 interval(s) to erase
Erasing area: 01380000 - 013AFFFF...
Operation took 0 minutes 4 seconds...
Writing...
Perm. Data Restore OK
Operation took 0 minutes 1 seconds...
Restarting MCU...
Operation took 0 minutes 0 seconds...
Flashing Done!
Operation took 3 minutes 2 seconds...
After flash processing...
Waiting for phone to boot...
Reading...
Phone type: RH-99, Software version: 5.80
IMEI: 351961033553379
Product Code:
Resetting PPC...
Done!
Setting test mode...
Setting FULL FACTORY...
Operation took 0 minutes 5 seconds...
Done!
Setting test mode...
Resetting USER DATA...
Operation took 0 minutes 0 seconds...
Done!
Setting test mode...
Resetting LEAVE FACTORY...
Operation took 0 minutes 0 seconds...
Done!
Setting test mode...
Resetting SERVICE CENTER...
Operation took 0 minutes 0 seconds...
Done!
Setting test mode...
Resetting UPGRADE SOFTWARE...
Operation took 0 minutes 0 seconds...
Done!
Setting test mode...
Resetting PRODUCTION TUNE...
Operation took 0 minutes 0 seconds...
Done!