xin giúp 1202 chạy bằng mxkey

[mobile_minhhieu]

đẻ em làm cái coi sao. tk bác nhiều

[mobile_minhhieu]

Getting MCU ID

MCU ID: 0x2293
FLASH ID0: 226800EC <=> SAMSUNG (SEC) -> K8S3215ETE Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 10
FLASH ID1: 00010000 <=> Flash -> not used Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 0
First 16 bytes: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
Checking RAM for ALGO...
Algo is ready...
Checking FAID calculation...
P-key nokia module version 01.02
Done!
Phone Restarted...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Switching to serial...
Powering the phone...
Failed! Aborting!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Switching to serial...
Powering the phone...
Failed! Aborting!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Documents and Settings\Admin\Desktop\112\1202 RH-112_3.0\1202 RH-112_3.0\rh112_003.000
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Documents and Settings\Admin\Desktop\112\1202 RH-112_3.0\1202 RH-112_3.0\rh112_003.000
PPM Flash file: C:\Documents and Settings\Admin\Desktop\112\1202 RH-112_3.0\1202 RH-112_3.0\rh112_003.00md
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Documents and Settings\Admin\Desktop\112\1202 RH-112_3.0\1202 RH-112_3.0\rh112_003.000
PPM Flash file: C:\Documents and Settings\Admin\Desktop\112\1202 RH-112_3.0\1202 RH-112_3.0\rh112_003.00md
CNT Flash file: C:\Documents and Settings\Admin\Desktop\112\1202 RH-112_3.0\1202 RH-112_3.0\rh1120_nai03.00md
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Backing up PM Field 208 as RPL...
Setting local mode...
Failed! Aborting!
Failed to backup imei...
MCU: C:\Documents and Settings\Admin\Desktop\112\1202 RH-112_3.0\1202 RH-112_3.0\rh112_003.000
Booting phone...
MCU ID: 0x2293
BOOT file: C:\Program Files\ODEON\JAF\Flash\u3_2nd.fia
Loader version: 04.46.01 -> Revision: 0007
Boot size is 0x09A8
Boot is ready...
FLASH ID0: 226800EC <=> SAMSUNG (SEC) -> K8S3215ETE Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 10
FLASH ID1: 00010000 <=> Flash -> not used Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 0
First 16 bytes: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
Flash ID is 0x6822EC00
Flash loader is C:\Program Files\ODEON\JAF\Flash\u3_amd.fia
Loader version: 04.46.01 -> Revision: 0007
Loader size is 0x7528; Loader chk: 50
Loader is ready...
P-key nokia module version 01.02
MSID: 84A85DAA0BB2EC275BCCBD2A70
MSID decoded: 3E4EBAE9006A9A2FA8000000
FAID: FDCAD06ECF44D01914320FA2
Operation took 0 minutes 6 seconds...
Erasing...
Found 5 interval(s) to erase
Erasing area: 01000000 - 0100FFFF...
Erasing area: 01010000 - 013AFFFF...
Erasing area: 013B0000 - 013EFFFF...
Erasing area: 017C0000 - 017EFFFF...
Erasing area: 01FC0000 - 01FEFFFF...
Operation took 0 minutes 25 seconds...
Writing...
Error cmd: 14!
Addr: 01000000

em đưa qua jaf chạy nó báo vậy rồi. em mới chạy phần mềm nên mong các bác chỉ giùm