Update Mcn-pro anh em vui lòng post ở đây

[GIALAI_GSM]

Mcnpro box ChinaRes Editor 1.26 released
Mcnpro box ChinaRes Editor 1.26 released New!

• Spreadtrum Language detection Improved
• Add Some new Nand flash (Eg, some special files)
• Other small report bugs fixed

Upgrading from Previous Versions:

• Version of 1.26 is a maintenance release. (require install suite version 2.09 first) so we are recommend all customers running prior versions upgrade to last version be more stability! As usual, new version is available for all customers with valid, To download that from support section

More Details check at here!


Send our congratulations to World University Games Shenzhen (China) 2011

[GIALAI_GSM]

Mcnpro Box official version 3.1.8 Released What's new for version 3.1.8 ? New! Hot!

• MTK 6252 / 6151 detection improved
• MTK New flash ICs added
• SPD automatic Nv data restore function added
• SPD safe mode format function improved
• SPD new flash ICs added
• Mstar Nand flash detection improved
• Mstar New flash ICs added
• Mcnpro box Firmware version upgrade to V1.13

Welcome to use McnBox!
 Selected COM5
 Baud setting ...
 Set Baud done
 Initialize in progress ...
 Checking data ...

 Serial No. MCN2011xxxxxxxx 
Firmware V1.13
 Checksum 72DA-42BB
 Box Connected!
 Ready working at COM5

Upgrading from Previous Versions:

• Version of 3.1.8 request install Suite version 2.0.9 at first, so we are recommend all customers running prior versions upgrade to last version be more stability! As usual, new version is available for all customers with valid, To download that from support section

More information check at here

Ps. Some new easy cables (3 types) will be realese in next few days. i will making a poll in related thread to discuss this.


Best regards!

Mcnbox

[tuda86]

may anh giup em boc .mcnproBox voi ,luc truoc em dem len hoang thong nho may anh o hong thong cai box dum em ,em ko biet cai ,bay gio may bi loi vin em cai vin lai .bay gio em cai vet 2.76 ,em muon update len 3.0.6 .nhung em ko biet lam nhu the nao ,mong cac anh chi dum em voi ,em cam on cac bac truoc nhe.

[thanhtunggialai™]

Mcnpro Box official version 3.1.9 Released
What's new for version 3.1.9 ? New! Hot!
MTK 6252 / 6151 / 6236 / 6516 read/write bugs fixed
MTK New flash ICs added
SPD Nand flash write bugs fixed
Infineon 7880 detection & write bugs fixed
Infineon 7890 / 7900 CPU added
Mcnpro box Firmware version upgrade to V1.1

Welcome to use McnBox!
Selected COM5
Baud setting ...
Set Baud done
Initialize in progress ...
Checking data ...
Serial No. MCN2011xxxxxxxx 
Firmware V1.15
Checksum 72DA-42BB
Box Connected!
Ready working at COM5

Other small report bugs fixed

Upgrading from Previous Versions:
Version of 3.1.9 request install Suite version 2.0.9 at first, so we are recommend all customers running prior versions upgrade to last version be more stability! As usual, new version is available for all customers with valid, To download that from support section

[GIALAI_GSM]

Mcnpro Box official version 3.2.0 Released

What's new for version 3.2.0 ? New! Hot!

• MTK 6252 read/write bugs fixed
• MTK New flash ICs added
• SPD New flash ICs added
• Other small report bugs fixed

Upgrading from Previous Versions:

• Version of 3.2.0 request install Suite version 2.0.9 and Firmware version upgrade to V1.15 at first , so we are recommend all customers running prior versions upgrade to last version be more stability! As usual, new version is available for all customers with valid, To download that from support section

More information check at here!


Best regards!

Mcnbox

[tuanwawezx]

Time for another new version

There are a few new features to help you along, which we've listed below.



Mcnpro Box Suite version 2.1.0 included:

Mcnpro Box Official Main version 3.2.1 New!!
Mcnpro Box ChinaRes Editor version 1.2.7 New!!
Mcnpro Box Virtual oscilloscope tools


What's new for Mcnpro box version 3.2.1 ?

Add SPD new Flash ICs
Add SPD 6610/6620 to supported
Fix SPD SC6600L detection bugs
SPD SC6600L bootloader improved
Add Mstar new Flash ICs
Add Mstar 8533x to supported
Add AD6905 Platform to supported(Beta version)
Write/Read (Backup) Full flash for phones
Write/Read (Backup/ Restore) NV data for phones
Direct unlock User code phones
Automatic CPU/ Chips infomation detection
Upgrade/downgrade phone firmware
Repair software-related problems
Via flash to repair dead phones
Can Empty board flashing(After flash chip replacement)
Save operation process results in Log file
Read/write IMEI for all AD6905 based models
Other small report bugs fixed


ChinaRes Editor version 1.2.7

Add direct font change function
Base SPD CPU phone detection Improved
Other small report bugs fixed


Upgrading from Previous Versions:

As usual, We recommend that all customers running previous versions now upgrade to new version which is available for all customers with valid, To download that from support section !


For more information check at Here.


For chinese mobile phone solution, Stay with us is your best choice !


Best regards !

[thanhtunggialai™]

Time for another new version

• There are a few new features to help you along, which we've listed below.

Mcnpro Box Suite version 2.1.0 included:

• Mcnpro Box Official Main version 3.2.1 New!!
• Mcnpro Box ChinaRes Editor version 1.2.7 New!!
• Mcnpro Box Virtual oscilloscope tools

What's new for Mcnpro box version 3.2.1 ?

• Add SPD new Flash ICs
• Add SPD 6610/6620 to supported
• Fix SPD SC6600L detection bugs
• SPD SC6600L bootloader improved
• Add Mstar new Flash ICs
• Add Mstar 8533x to supported
• Add AD6905 Platform to supported(Beta version)
  • Write/Read (Backup) Full flash for phones
  • Write/Read (Backup/ Restore) NV data for phones
  • Direct unlock User code phones
  • Automatic CPU/ Chips infomation detection
  • Upgrade/downgrade phone firmware
  • Repair software-related problems
  • Via flash to repair dead phones
  • Can Empty board flashing(After flash chip replacement)
  • Save operation process results in Log file
  • Read/write IMEI for all AD6905 based models
• Other small report bugs fixed

ChinaRes Editor version 1.2.7

• Add direct font change function
• Base SPD CPU phone detection Improved
• Other small report bugs fixed

Upgrading from Previous Versions:

As usual, We recommend that all customers running previous versions now upgrade to new version which is available for all customers with valid, To download that from support section !

For more information check at Here.


For chinese mobile phone solution, Stay with us is your best choice !


Best regards !


Mcnbox

[GIALAI_GSM]

Mcnpro Box new update to version 3.2.2 !!! ★★★★★

What's new for Mcnpro box version 3.2.2 ? New!!

• Spreadtrum 6610/20 new Flash ICs added
• Spreadtrum 6610/20 format bugs fixed
• Spreadtrum bootloader detecting info added

[G:8 11 12 16 D-:9 D+:10 Down:7] Apply to Box
Checking SCI USB2Serial port, wait...
SCI USB2Serial Port: COM45
Connecting, wait...
Phone Connected!
Info: Spreadtrum Boot Block version 2.0
Initialize boot2...
CPU Info 6600M/E
Flash Type NOR
Flash ID 00EC257E(25082501)
Flash Model K5L2931CAM
Flash Size 0x1000000(16.0M)
Start Reading...
...

• Spreadtrum bootloader improved
• Add Mstar new Flash ICs
• Mstar bootloader improved
• Other small report bugs fixed

Upgrading from Previous Versions:

Version of 3.2.2 request install Suite version 2.1.0 and Box Firmware version upgrade to V1.15 at first . So we recommend that all customers running previous versions now upgrade to new version which is available for all customers with valid, To download that from support section !

More information and Discussion at here >>



Best regards !


Mcnbox

[LocPhatBacLieu™]

Mcnpro Box new update version 3.2.2

Download

[LocPhatBacLieu™]

Mcnpro Box official version 3.2.3 Released
Released: December 14, 2011

Spreadtrum new Flash ICs added
Spreadtrum format bugs fixed
Add Software version detect version

Welcome to use McnBox!
Selected COM9
Baud setting ...
Set Baud done
Initialize in progress ...
Checking data ...
Serial No. MCNxxxxxxxxxxxx
Firmware V1.15
Checksum 15B9-21BE
Software V3.23
Box Connected!
Ready working at COM9
...

Spreadtrum bootloader improved
Other small report bugs fixed

Link: Mcnpro_Box_3.2.3