Medusa Box Updates

[namnhatrang]

Medusa Box v.2.5.0 - added LG G3 series USB repair!

Medusa Box v.2.5.0 is out!

We have added boot repair (all in Test Mode) via USB and small TP for LG G3 D852, D852G, D855, D855K and D855P.

Medusa Box v.2.5.0 Release Notes:

- Added support for the following models:

• LG D852 - added Dead Boot Repair via USB (Beta)
• LG D852G - added Dead Boot Repair via USB (Beta)
• LG D855 - added Dead Boot Repair via USB (Beta)
• LG D855K - added Dead Boot Repair via USB (Beta)
• LG D855P - added Dead Boot Repair via USB (Beta)

- All pinouts and Repair procedures are described in the manual ("Help" button in Software)

To repair mentioned above devices via USB, please follow the three next steps:

1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
   (do NOT use any USB hubs!)
2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
   Drivers are in {Installation_Folder}\Driver\QHSUSB
3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

Medusa - Ultimate Breakthrough in the Phone Repair!


Download Medusa Box v.2.5.0

[namnhatrang]

Medusa Box v.2.5.0 - added LG G3 series USB repair!

Medusa Box v.2.5.0 is out!

We have added boot repair (all in Test Mode) via USB and small TP for LG G3 D852, D852G, D855, D855K and D855P.

Medusa Box v.2.5.0 Release Notes:

- Added support for the following models:

• LG D852 - added Dead Boot Repair via USB (Beta)
• LG D852G - added Dead Boot Repair via USB (Beta)
• LG D855 - added Dead Boot Repair via USB (Beta)
• LG D855K - added Dead Boot Repair via USB (Beta)
• LG D855P - added Dead Boot Repair via USB (Beta)

- All pinouts and Repair procedures are described in the manual ("Help" button in Software)

To repair mentioned above devices via USB, please follow the three next steps:

1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
   (do NOT use any USB hubs!)
2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
   Drivers are in {Installation_Folder}\Driver\QHSUSB
3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

Medusa - Ultimate Breakthrough in the Phone Repair!


Download Medusa Box v.2.5.0

[namnhatrang]

Medusa Box v.2.5.1 is out!

We have added Boot Repair via USB and small TP for LG Optimus LTE II F160LV, LG F160K, LG F160S
and via JTAG for ZTE P752D (Vodafone Smart Chat V865) and Huawei E171 (CPU: HiSilicon HI6731)!

Medusa Box v.2.5.1 Release Notes:
- Added support for the following models:

• LG F160LV - added Dead Boot/Device Repair via USB
• LG F160K - added Dead Boot Repair via USB
• LG F160S - added Dead Boot Repair via USB
• Huawei E171 (CPU: HiSilicon HI6731) - added Dead Boot/Device Repair via JTAG
• ZTE P752D - added Dead Boot/Device Repair via JTAG (thanks to Mr. Dr_Wolodya)

- All pinouts and Repair procedures are described in the manual ("Help" button in Software)

To repair mentioned above devices via USB, please follow the three next steps:

1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
   (do NOT use any USB hubs!)
2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
   Drivers are in {Installation_Folder}\Driver\QHSUSB
3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

[YOUTUBEHD]JrRPPr5Xr60[/YOUTUBEHD]




Medusa - Ultimate Breakthrough in the Phone Repair!


Download Medusa Box v.2.5.1

[namnhatrang]

Medusa Box v.2.5.2 - we have no rest

Medusa Box v.2.5.2 is out!

We have added Boot Repair via JTAG for LG Optimus LTE II F160LV, LG F160K, LG F160S
and via USB and small TP for LG F70 F370K, LG F370L, F370S.

Medusa Box v.2.5.2 Release Notes:

- Added support for the following models:

• LG F160LV - added Dead Boot / Device Repair via JTAG
• LG F160K - added Dead Boot Repair via JTAG
• LG F160S - added Dead Boot Repair via JTAG
• LG F370K - added Dead Boot Repair via USB
• LG F370L - added Dead Boot Repair via USB
• LG F370S - added Dead Boot Repair via USB

- All pinouts and Repair procedures are described in the manual ("Help" button in Software)

To repair mentioned above devices via USB, please follow the three next steps:

1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
   (do NOT use any USB hubs!)
2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
   Drivers are in {Installation_Folder}\Driver\QHSUSB
3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

[YOUTUBEHD]L-K07lHXZoA[/YOUTUBEHD]




Medusa - Ultimate Breakthrough in the Phone Repair!


Download Medusa Box v.2.5.2

[namnhatrang]

Medusa Box v.2.5.3 is out!

Medusa Box v.2.5.3 is out!

We have added Boot Repair via USB and small TP for LG VS930 and LG F160L
and via JTAG for TeXet TM-3200R, Crius Q7A and Huawei G520-0000!

Medusa Box v.2.5.3 Release Notes:

- Added support for the following models:

• LG VS930 - added Dead Boot Repair via USB
• LG F160L - added Dead Boot Repair via USB
• TeXet TM-3200R - Dead Boot / Device Repair via JTAG (thanks to mr. Drunya_L)
• Crius Q7A - Dead Boot / Device Repair via JTAG (thanks to mr. DZ_Developer)
• Huawei G520-0000 - added Dead Boot Repair via JTAG (thanks to mr. Dr_Wolodya)

- All pinouts and Repair procedures are described in the manual ("Help" button in Software)

To repair LG VS930 and LG F160L via USB, please follow the three next steps:

1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
   (do NOT use any USB hubs!)
2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
   Drivers are in {Installation_Folder}\Driver\QHSUSB
3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

[YOUTUBEHD]DCEQTFM4XIE[/YOUTUBEHD]




Medusa - Ultimate Breakthrough in the Phone Repair!


Download Medusa Box v.2.5.3

[namnhatrang]

Medusa Box v.2.5.4 is out! [HR][/HR]

Medusa Box v.2.5.4 is out!

We have added Boot Repair via USB and small TP for LG D165G, LG D415RD, LG VS870
and via JTAG for HTC HD7 (PD29100) and Huawei E586!

Medusa Box v.2.5.4 Release Notes:
- Added support for the following models:

• LG D165G - added Dead Boot Repair via USB
• LG D415RD - added Dead Boot Repair via USB
• LG VS870 - added Dead Boot / Device Repair via USB
• HTC HD7 (PD29100) - added Dead Boot Repair, Repair IMEI, Repair CID, Read Codes via JTAG (thanks to mr. Chromgsmunlock)
• Huawei E586 - added Dead Boot Repair via JTAG (thanks to mr. Dr_Wolodya)

- All pinouts and Repair procedures are described in the manual ("Help" button in Software)


To repair LG D165G, LG D415RD and LG VS870 via USB, please follow the three next steps:

1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
   (do NOT use any USB hubs!)
2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
   Drivers are in {Installation_Folder}\Driver\QHSUSB
3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

Medusa - Ultimate Breakthrough in the Phone Repair!


Download Medusa Box v.2.5.4

[namnhatrang]

Medusa Box v.2.5.5 is out!

Medusa Box v.2.5.5 is out!

We have added Boot Repair via USB and small TP for LG P930, LG LU6200
and via JTAG for HTC One M7 (PN0720000) and Huawei Y300-0000!

Medusa Box v.2.5.5 Release Notes:
- Added support for the following models:

• LG P930 - added Dead Boot Repair via USB
• LG LU6200 - added Dead Boot Repair via USB
• Huawei Y300-0000 - added Dead Boot Repair via JTAG (thanks to Mr. Dr_Wolodya)
• HTC One M7 (PN0720000) - added Dead Boot Repair, Repair IMEI, Repair CID via JTAG

- All pinouts and Repair procedures are described in the manual ("Help" button in Software)

To repair LG P930 and LG LU6200 via USB, please follow the three next steps:

1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
   (do NOT use any USB hubs!)
2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
   Drivers are in {Installation_Folder}\Driver\QHSUSB
3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

Medusa - Ultimate Breakthrough in the Phone Repair!


Download Medusa Box v.2.5.5

[namnhatrang]

Medusa Box v.2.5.6 is out! [HR][/HR]

Medusa Box v.2.5.6 is out!

We have added Boot Repair via USB and small TP for LG P935, LG P936, LG SU640 and via JTAG for ZTE Turkcell T40!

Medusa Box v.2.5.6 Release Notes:
- Added support for the following models:

• LG P935 - added Dead Boot Repair via USB
• LG P936 - added Dead Boot Repair via USB
• LG SU640 - added Dead Boot Repair via USB
• ZTE Turkcell T40 - added Dead Boot/Device Repair via JTAG (thanks to Mr. mathew_di)

- All pinouts and Repair procedures are described in the manual ("Help" button in Software)

To repair LG P935, LG P936 and LG SU640 via USB, please follow the three next steps:

1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
   (do NOT use any USB hubs!)
2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
   Drivers are in {Installation_Folder}\Driver\QHSUSB
3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

Medusa - Ultimate Breakthrough in the Phone Repair!


Download Medusa Box v.2.5.6

[namnhatrang]

Medusa Box v.2.5.7 is out!

Medusa Box v.2.5.7 is out!

We have added Boot Repair via USB and small TP for LG E970, LG H220 and via JTAG for Huawei G525-U00, HTC One M7 (PN07110)!

Medusa Box v.2.5.7 Release Notes:
- Added support for the following models:

• LG E970 - added Dead Boot Repair via USB
• LG H220 - added Dead Boot Repair via USB
• Huawei G525-U00 - added Dead Boot / Device Repair via JTAG
• HTC One M7 (PN07110) - added Dead Boot Repair via JTAG, Repair IMEI, Repair CID (thanks to Mr. mathew_di)

- All pinouts and Repair procedures are described in the manual ("Help" button in Software)

To repair LG E970 and LG H220 via USB, please follow the three next steps:

1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
   (do NOT use any USB hubs!)
2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
   Drivers are in {Installation_Folder}\Driver\QHSUSB
3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

Medusa - Ultimate Breakthrough in the Phone Repair!


Download Medusa Box v.2.5.7

[namnhatrang]

Medusa Box v.2.5.7 is out!

Medusa Box v.2.5.7 is out!

We have added Boot Repair via USB and small TP for LG E970, LG H220 and via JTAG for Huawei G525-U00, HTC One M7 (PN07110)!

Medusa Box v.2.5.7 Release Notes:
- Added support for the following models:

• LG E970 - added Dead Boot Repair via USB
• LG H220 - added Dead Boot Repair via USB
• Huawei G525-U00 - added Dead Boot / Device Repair via JTAG
• HTC One M7 (PN07110) - added Dead Boot Repair via JTAG, Repair IMEI, Repair CID (thanks to Mr. mathew_di)

- All pinouts and Repair procedures are described in the manual ("Help" button in Software)

To repair LG E970 and LG H220 via USB, please follow the three next steps:

1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the mainboard’s USB port
   (do NOT use any USB hubs!)
2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet.
   Drivers are in {Installation_Folder}\Driver\QHSUSB
3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

Medusa - Ultimate Breakthrough in the Phone Repair!


Download Medusa Box v.2.5.7