[Chia sẻ] Unlocked-Repaired-Flashed Samsung ok by Octopus/Octoplus post ở đây

[TuệNguyễn]

Show SPH-W7100 unlock ok
Welcome to Octopus Box Samsung software version 1.8.8
Platform: Samsung Anycall
Selected port: COM30
Selected model: SPH-W7100
Mode: Normal
Phone model: SPH-W7100
Firmware compiled date: May 05 2008
Firmware compiled time: 08:00:00
Firmware released date: Jun 05 2009
Firmware released time: 16:36:00
Phone IMEI: 358486-02-241566-4
Bluetooth MAC: 00:25:67:AA:19:7A
SW Version: M6281A-KLRZ-4.0.9565T
Creating NVM backup
Reading NVM done!
Unlocking phone...
Switching to emergency mode...
No diagnostic ports found!
Connecting to phone on COM30
Detected phone model: SPH-W7100
Mode: Emergency
Detecting firmware type
Searching for signatures...
Reading NAND...
Writing NAND
Phone is successfully unlocked

[TuệNguyễn]

T989 flash 4.1.2 ok

Welcome to Octopus Box Samsung software version 1.9.3
-----------------------------------------------------------------------------------
To connect SGH-T989 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "USB" radio button to "Modem" value.
8. Close window.
9. Go to dial window.
10. Enter "*#9090#" number.
11. Set "Diag config" to "USB" value.
12. Restart phone.
13. Press "Read Info" in software.
Selected firmware file: T989UVMC6_T989TMBMC6_TMB_Android_
4.1.2.oct
Please switch your phone to the download mode and connect it to a
PC.
To put SGH-T989 phone into download mode you have to perform the
following steps:
1. Reconnect phone battery.
2. Press and hold "Volume - " + "Power" buttons.
Found phone on
Firmware write started.
Writing ABOOT section...
ABOOT section has been written successfully.
Writing MODEM section...
MODEM section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Writing MDM section...
MDM section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing RPM section...
RPM section has been written successfully.
Writing SBL2 section...
SBL2 section has been written successfully.
Writing SBL3 section...
SBL3 section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing TOMBSTONES section...
TOMBSTONES section has been written successfully.
Writing TZ section...
TZ section has been written successfully.
Firmware writing successfully completed.

[TuệNguyễn]

S5620 treo logo hình Điện thoại kg vào đc dowload flash ok.

Welcome to Octopus Box Samsung software version 1.9.4
-----------------------------------------------------------------------------------

Please switch your phone to the download mode and connect it to a
PC.
To put GT-S5620 device into download mode you have to perform the
following steps:
1. Power off device.
2. Press and hold "Volume - " + "Power" buttons.
Searching for a phone. Please wait...
Found phone on COM26
Firmware write started.
Writing BOOT\BCMBOOT section...
Writing BOOT\BOOT2 section...
Writing BOOT\DROM_DSP section...
Writing BOOT\PATCH_DSP section...
Writing BOOT\SYSPARM_DEP section...
Writing BOOT\SYSPARM_IND section...
Writing BOOT\NVRAM6 section...
Phone will restart now. Please don't disconnect cable!
Writing AMSS section...
AMSS section has been written successfully.
Writing APPS section...
APPS section has been written successfully.
Writing RSRC1 section...
RSRC1 section has been written successfully.
Writing RSRC2 section...
RSRC2 section has been written successfully.
Writing FactoryFS section...
Formating FactoryFS partition...
Formating successfully compleated
FactoryFS section has been written successfully.
Writing CSC section...
CSC section has been written successfully.
Writing SHPAPP section...
SHPAPP section has been written successfully.
Phone will restart now
Firmware writing successfully completed.

[TuệNguyễn]

i727 unlock done

Welcome to Octopus Box Samsung software version 1.9.4
-----------------------------------------------------------------------------------

Platform: Samsung Android
Selected port: COM33
Selected model: SGH-I727
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM35
Mode: Normal
Phone model: SGH-I727
Firmware compiled date: Dec 07 2011
Firmware compiled time: 10:00:00
Firmware released date: Jan 20 2012
Firmware released time: 20:33:42
Phone IMEI: 357288-04-269655-9
SW Version: M9200B-SCAQCSZD-3.0.552140T
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM35
Selected model: SGH-I727
Mode: Normal
Phone model: SGH-I727
Firmware compiled date: Dec 07 2011
Firmware compiled time: 10:00:00
Firmware released date: Jan 20 2012
Firmware released time: 20:33:42
Phone IMEI: 357288-04-269655-9
SW Version: M9200B-SCAQCSZD-3.0.552140T
Unlocking phone...
Phone is successfully unlocked
Please, restart the phone to apply changes

[TuệNguyễn]

C3303i mã bảo vệ (freeze) Z3X bó tay, lôi con octopus múc phát done.

Platform: Samsung Swift
Selected model: GT-C3300I
Selected port: COM4
Baud rate: 115200
Please, connect phone to UART cable, insert battery and press power button for 3 seconds.
Connecting...
Phone in TAT mode.
Reading info, please wait...
Phone IMEI A: 35171705027577
SW Version: C3303iDXK
Bluetooth MAC: 9C0298626302
Phone SN : RF1C21NRW8
Reading codes...
Deactivating MSL...
MSL deactivate successfully
Freeze lock: 59608610
Net lock: 00000000
Sim lock: 00000000
Phone lock: 00000000
Sp lock: 00000000

[TuệNguyễn]

Note i717 unlock ok by read code
xz3 unlock báo done gắng sim vào bắt nhập code, lôi con Octopus ra read code nhập vào done
log unlock z3x

Selected model: I717
Selected port: COM17 SAMSUNG Mobile USB Serial Port
Selected port speed: 115200
Reading phone info...
PDA/CSC version: I717UCLA1/I717ATTLA1
Phone version: SW VERSION :None
Phone HW: REV0.3
Cal date: 2012.06.18
IMEI: 35201305141136
Phone S/N: R21C62NA72
Build: M9200B-SCAQCSZD-3.0.552140T
Reading security... OK
Calculating... OK
Writing security... OK
Reseting...
Unlock done
Done with Samsung Tool v.14.5
Read code báo lỗi:
Selected model: I717
Selected port: COM17 SAMSUNG Mobile USB Serial Port
Selected port speed: 115200
Reading phone info...
PDA/CSC version: I717UCLA1/I717ATTLA1
Phone version: SW VERSION :None
Phone HW: REV0.3
Cal date: 2012.06.18
IMEI: 35201305141136
Phone S/N: R21C62NA72
Build: M9200B-SCAQCSZD-3.0.552140T
Reading security... OK
Searching server... error ()
Done with Samsung Tool v.14.5
Done with Samsung Tool v.14.5

Log Read code Octopus

Platform: Samsung Android
Selected port: COM17
Selected model: SGH-I717
Mode: Normal
Phone model: SGH-I717
Firmware compiled date: Dec 07 2011
Firmware compiled time: 10:00:00
Firmware released date: Jan 05 2012
Firmware released time: 16:42:17
Phone IMEI: 352013-05-141136-8
SW Version: M9200B-SCAQCSZD-3.0.552140T
Reading phone unlock codes. It can take some time, please wait...
Connecting to server...
Connect successfully to server
Checking DreamBox...
DreamBox successfully checked
Checking operation...
Operation successfully checked
NCK unlock code: *#7465625*638*31730202#
NSCK unlock code: *#7465625*782*00000000#
SPCK unlock code: *#7465625*77*00000000#

[TuệNguyễn]

Note i717 flash 4.1.2 ok

Welcome to Octopus Box Samsung software version 1.9.4
-----------------------------------------------------------------------------------
To connect SGH-I717 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "USB" radio button to "Modem" value.
8. Close window.
9. Go to dial window.
10. Enter "*#9090#" number.
11. Set "Diag config" to "USB" value.
12. Restart phone.
13. Press "Read Info" in software.
Selected firmware file: I717UCMD3_I717ATTMD3_XXX_Android_4.1.2.oct
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM19
Selected model: SGH-I717
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM19
Phone connection failed
No diagnostic ports found!
Please switch your phone to the download mode and connect it to a
PC.
To put SGH-I717 phone into download mode you have to perform the
following steps:
1. Reconnect phone battery.
2. Press and hold "Volume - " + "Home" + "Power" buttons.
3. When phone turns on press "Volume+" button.
Found phone on
Firmware write started.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing MODEM section...
MODEM section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Writing MDM section...
MDM section has been written successfully.
Firmware writing successfully completed.

[TuệNguyễn]

Máy cùi bắp E1182 mã khóa máy vào sim z3x múc kg nổi lôi con oct ra múc done

Welcome to Octoplus/Octopus Box Samsung software version 1.2.8
-----------------------------------------------------------------------------------

Platform: Samsung Swift
Selected model: GT-E1182
Selected port: COM4
Baud rate: 115200
Please, connect phone to UART cable, insert battery and press power
button for 3 seconds.
Connecting...
Phone in TAT mode.
Reading info, please wait...
Phone IMEI A: 35842204552062
Phone IMEI B: 35842304552062
SW Version: E1182DXKG
Phone SN : RF2B938018
-----------------------------------------------------------------------------------
Platform: Samsung Swift
Selected model: GT-E1182
Selected port: COM4
Baud rate: 115200
Please, connect phone to UART cable, insert battery and press power
button for 3 seconds.
Phone found.
Sending preloader...
Preloader send successfully
Sending mainloader...
Mainloader send successfully
Searching patch area, please wait...
Writing patch...
Patch successfully write.
Rebooting phone
Connecting...
Phone in TAT mode.
Reading info, please wait...
Phone IMEI A: 35842204552062
Phone IMEI B: 35842304552062
SW Version: E1182DXKG
Phone SN : RF2B938018
Reading codes...
Freeze lock: 20793860
Net lock: 00000000
Sim lock: 00000000
Phone lock: 00000000
Sp lock: 00000000

[TuệNguyễn]

Samsung T989D unlock ok.

Welcome to Octoplus/Octopus Box Samsung software version 1.3.0
-----------------------------------------------------------------------------------

Connecting to phone on COM60
Mode: Normal
Phone model: SGH-T989D
Firmware compiled date: Jun 19 2012
Firmware compiled time: 23:00:00
Firmware released date: Jul 10 2012
Firmware released time: 20:53:06
Phone IMEI: 359606-04-111683-2
SW Version: M9200B-SCAQCSZD-3.4.701096
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM60
Selected model: SGH-T989D
Mode: Normal
Phone model: SGH-T989D
Firmware compiled date: Jun 19 2012
Firmware compiled time: 23:00:00
Firmware released date: Jul 10 2012
Firmware released time: 20:53:06
Phone IMEI: 359606-04-111683-2
SW Version: M9200B-SCAQCSZD-3.4.701096
Unlocking phone...
Phone is successfully unlocked
Please, restart the phone to apply changes

[TuệNguyễn]

Samsung i9100G treo logo flash ok

Welcome to Octoplus/Octopus Box Samsung software version 1.3.0
-----------------------------------------------------------------------------------

Please switch your phone to the download mode and connect it to a
PC.
To put GT-I9100G phone into download mode you have to perform the
following steps:
1. Reconnect phone battery.
2. Press and hold "Volume - " + "Home" + "Power" buttons.
3. When phone turns on press "Volume+" button.
Found phone on
Firmware write started.
Writing CACHE section...
CACHE section has been written successfully.
Writing FACTORYFS section...
FACTORYFS section has been written successfully.
Writing HIDDEN section...
HIDDEN section has been written successfully.
Writing X-loader section...
X-loader section has been written successfully.
Writing MODEM section...
MODEM section has been written successfully.
Writing PARAM section...
PARAM section has been written successfully.
Writing SBL1 section...
SBL1 section has been written successfully.
Writing KERNEL section...
KERNEL section has been written successfully.
Firmware writing successfully completed.