[Chia sẻ] Unlocked-Repaired-Flashed Samsung ok by Octopus/Octoplus post ở đây

[phung77]

I777 unlock ok by octoplus
Platform: Samsung Android
Selected port: COM18
Selected model: SGH-I777
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM30
Detected phone model: SGH-I777
HW Version: SGH-I777ZKZATT
Phone IMEI: 359437-04-031984-1
Firmware compiled date: Tue Nov 29 19:49:45 KST 2011
Phone SN: 00000000000
Android version: 2.3.6 (GINGERBREAD)
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM30
Selected model: SGH-I777
Detected phone model: SGH-I777
HW Version: SGH-I777ZKZATT
Phone IMEI: 359437-04-031984-1
Firmware compiled date: Tue Nov 29 19:49:45 KST 2011
Phone SN: 00000000000
Android version: 2.3.6 (GINGERBREAD)
Unlocking phone...
Creating NVM backup
Backup saved as C:\Program Files\Octoplus\Octoplus_Samsung
\BACKUP\NVDATA-SGH-I777-359437040319841-11-12-2013_11-55-
27-.nvm file
Unlocking phone. It can take some time. Please wait...
Phone will restart now
Phone is successfully unlocked
Phone will restart now

[phung77]

t989 unlock ok
Welcome to Octoplus/Octopus Box Samsung software version 1.4.8
-----------------------------------------------------------------------------------
To connect GT-S5360 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When the message appears press "Yes".
5. Connect USB cable to the phone.
6. Press "Read Info" in software.
-----------------------------------------------------------------------------------
To connect SGH-T959V phone you have to perform the following
steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "USB" radio button to "PDA" value.
8. Close window.
9. Go to dial window.
10. Enter "*#9090#" number.
11. Set "Diag config" to "USB" value.
12. Restart phone.
13. Press "Read Info" in software.
-----------------------------------------------------------------------------------
To connect SGH-T989 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "USB" radio button to "Modem" value.
8. Close window.
9. Go to dial window.
10. Enter "*#9090#" number.
11. Set "Diag config" to "USB" value.
12. Restart phone.
13. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM29
Selected model: SGH-T989
Phone was not found on the selected port!
Searching for USB diagnostic port...
No diagnostic ports found!
Connecting to phone on COM29
Phone connection failed
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM35
Selected model: SGH-T989
Mode: Normal
Phone model: SGH-T989
Firmware compiled date: Sep 09 2011
Firmware compiled time: 17:00:00
Firmware released date: Jan 14 2013
Firmware released time: 11:32:24
Phone IMEI: 359858-04-075911-8
SW version: M9200B-SCAQCSZD-3.0.552092
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM35
Selected model: SGH-T989
Mode: Normal
Phone model: SGH-T989
Firmware compiled date: Sep 09 2011
Firmware compiled time: 17:00:00
Firmware released date: Jan 14 2013
Firmware released time: 11:32:24
Phone IMEI: 359858-04-075911-8
SW version: M9200B-SCAQCSZD-3.0.552092
Unlocking phone...
Phone is successfully unlocked
To finish the operation, please restart the phone via phone's menu
(don't disconnect the battery!)

[minhkhoalx]

T959 unlock done!
Welcome to Octoplus/Octopus Box Samsung software version 1.4.8
-----------------------------------------------------------------------------------
To connect SGH-M919 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Builds numbers" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#0808#" number.
8. Select "DM+Modem+ADB".
9. Close window.
10. Go to dial window.
11. Enter "*#9090#" number.
12. Set "Diag config" to "USB" value.
13. Restart phone.
14. Press "Read Info" in software.
-----------------------------------------------------------------------------------
To connect SGH-T959 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "USB" radio button to "PDA" value.
8. Close window.
9. Go to dial window.
10. Enter "*#9090#" number.
11. Set "Diag config" to "USB" value.
12. Restart phone.
13. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM129
Selected model: SGH-T959
Detected phone model: SGH-T959
HW Version: SGH-T959ZKBTMB
Phone IMEI: 355060-04-222520-6
Firmware compiled date: 2011. 01. 13. (목) 12:29:52 KST
PDA version: T959UVKA2
CSC version: T959TMBJI6
SW version: T959UVKA2
Phone IMEI: 355060042225206
Android version: 2.1.1 (ECLAIR)
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM129
Selected model: SGH-T959
Detected phone model: SGH-T959
HW Version: SGH-T959ZKBTMB
Phone IMEI: 355060-04-222520-6
Firmware compiled date: 2011. 01. 13. (목) 12:29:52 KST
PDA version: T959UVKA2
CSC version: T959TMBJI6
SW version: T959UVKA2
Phone IMEI: 355060042225206
Android version: 2.1.1 (ECLAIR)
Reading phone unlock codes. It can take some time, please wait...
Device will be rooted now. This process can take about 2 minutes.
Please, wait...
Root privileges successfully obtained.
-----------------------------------------------------------------------------------
MCK unlock code: 29048273
NCK unlock code: 26095140 LOCKED
NSCK unlock code: 00000000 UNLOCKED
SPCK unlock code: 00000000 UNLOCKED
CPCK unlock code: 00000000 UNLOCKED
Work time: 0:00:07
To finish the operation you have to perform the following steps:
1. Turn the phone off.
2. Insert an unsupported SIM card.
3. Turn phone on.
4. Enter PIN code (if needed).
5. In unlock PIN window enter proper unlock code and press "Unlock"
button.
6. Restart the phone.

[haiaumobile]

anycall sph-w8500 unlock ok

Welcome to Octopus Box Samsung software version 1.9.2
-----------------------------------------------------------------------------------
To connect GT-S7562 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#9090#" number.
7. Set "Diag config" to "USB" value.
8. Restart phone.
9. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM91
Selected model: SCH-W850
Mode: Normal
Phone model: SCH-W850
Firmware compiled date: Nov 18 2008
Firmware compiled time: 24:00:00
Firmware released date: Jul 15 2009
Firmware released time: 00:51:32
Phone IMEI: 354439-03-198523-9
Can't read bluetooth MAC address
SW Version: M76XX-SDOBOAZM-3555
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM91
Selected model: SCH-W850
Mode: Normal
Phone model: SCH-W850
Firmware compiled date: Nov 18 2008
Firmware compiled time: 24:00:00
Firmware released date: Jul 15 2009
Firmware released time: 00:51:32
Phone IMEI: 354439-03-198523-9
Can't read bluetooth MAC address
SW Version: M76XX-SDOBOAZM-3555
Reading phone unlock codes. It can take some time, please wait...
-----------------------------------------------------------------------------------
Phone unlock code: 35816616
To finish the operation you have to perform the following steps:
1. Go to dial window.
2. Enter "4433366368791" number.
3. Select "WCDMA Settings" in menu.
4. Enter "92362" code.
5. Press OK.
6. Select "Enter NCK" in menu.
7. Enter the phone unlock code code.
8. Press OK.

[phung77]

i9300t unlock ok by octoplus
Welcome to Octoplus/Octopus Box Samsung software version 1.5.8
-----------------------------------------------------------------------------------
To connect GT-S5830 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#9090#" number.
7. Set "Diag config" to "USB" value.
8. Restart phone.
9. Press "Read Info" in software.
-----------------------------------------------------------------------------------
To connect GT-I9300T phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Developer options.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Connect usb cable to phone.
6. Go to dial window.
7. Enter *#9090# number.
8. Set speed to 115200.
9. Reboot phone.
10. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM108
Selected model: GT-I9300T
Detected phone model: GT-I9300T
Firmware compiled date: Mon Jan 20 16:56:49 KST 2014
PDA version: I9300TDUUGNA4
CSC version: I9300TVAUGNA2
SW version: I9300TDUUGNA2
Phone IMEI: 359810040381872
Phone SN: R31C50ZVXDY
Android version: 4.3 (JSS15J)
Checking Root:
Phone is not Rooted. Rooting phone...
Phone unlocking failed
Selected firmware file: Root_GT-I9300_4.3.oct
Please switch your phone to the download mode and connect it to a
PC.
To put GT-I9300T phone into download mode you have to perform the
following steps:
1. Reconnect phone battery.
2. Press and hold "Volume - " + "Home" + "Power" buttons.
3. When phone turns on press "Volume+" button.
Found phone on
File has been created for a different phone model.
Please switch your phone to the download mode and connect it to a
PC.
To put GT-I9300T phone into download mode you have to perform the
following steps:
1. Reconnect phone battery.
2. Press and hold "Volume - " + "Home" + "Power" buttons.
3. When phone turns on press "Volume+" button.
Found phone on
File has been created for a different phone model.
Please switch your phone to the download mode and connect it to a
PC.
To put GT-I9300T phone into download mode you have to perform the
following steps:
1. Reconnect phone battery.
2. Press and hold "Volume - " + "Home" + "Power" buttons.
3. When phone turns on press "Volume+" button.
Found phone on
File has been created for a different phone model.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM108
Selected model: GT-I9300T
Proper android device not found. Make shure that "USB debug" option
on the device is turned on.
Phone unlocking failed
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM108
Selected model: GT-I9300T
Proper android device not found. Make shure that "USB debug" option
on the device is turned on.
Phone unlocking failed
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM108
Selected model: GT-I9300T
Searching for a phone. Please wait...
Phone found.
Proper android device not found. Make shure that "USB debug" option
on the device is turned on.
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM108
Searching for a phone. Please wait...
Phone found.
Proper android device not found. Make shure that "USB debug" option
on the device is turned on.
Phone connection failed
No diagnostic ports found!
Connecting to phone on COM29
Searching for a phone. Please wait...
Phone found.
Proper android device not found. Make shure that "USB debug" option
on the device is turned on.
Searching for a phone. Please wait...
Phone found.
Proper android device not found. Make shure that "USB debug" option
on the device is turned on.
Phone connection failed
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM108
Selected model: GT-I9300T
Detected phone model: GT-I9300T
Firmware compiled date: Mon Jan 20 16:56:49 KST 2014
PDA version: I9300TDUUGNA4
CSC version: I9300TVAUGNA2
SW version: I9300TDUUGNA2
Phone IMEI: 359810040381872
Phone SN: R31C50ZVXDY
Android version: 4.3 (JSS15J)
Checking Root:
Phone is Rooted.
Reading security backup, please wait...
Backup saved as C:\Program Files\Octoplus\Octoplus_Samsung
\BACKUP\Security-GT-I9300T-Unknown12-06-2014_19-06-00-.asec
file
Cheking security type...
New security type is detected
Executing exploit...
Exploit has been executed successfully
Unlocking phone. This can take some time. Please wait...
Phone will restart now
Phone is successfully unlocked
To finish the operation, please restart the phone via phone's menu
(don't disconnect the battery!)
kèo buổi tối

[phung77]

SKY A 630K repair boot ok by octoplus
VREF = 0.0V is less than required level. Please check target device power supply.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S256 revision C.
Detected TAP ID: 203C10E1, IR Length = 4.
JTAG speed : 12000 KHz.
VREF level : 2.62 V
CPU : Qualcomm MSM7227T
Core ID : 203C10E1
Flash device: Samsung 1024Mb
Flash ID : 00EC55B3
Page size : 2048 bytes
Block size : 64 pages (128 Kb)
Block count: 8192
Flash size : 1024 Mb
Opening "C:\Users\Renall\Downloads\SKY_IMA630K_Repair.mf\S KY_IMA630K_Repair.mf" file...
Writing BOOT section. Please wait... Done
Writing FIRMWARE section. Please wait... Done
Disconnected
Repair done.

[phung77]

repair boot 5830i full flash ok
Connecting. Please wait... Medusa JTAG Firmware version 1.1.0. Medusa JTAG Hardware S256 revision C. Detected TAP ID: 07B3617F, IR Length = 5. JTAG speed : 12000 KHz. VREF level : 1.77 V CPU : Broadcom BCM2155 Core ID : 07B3617F Flash device: Samsung OneNAND KFG4GH6Q4M Flash ID : 00EC0050 Page size : 4096 bytes Block size : 64 pages (256 Kb) Block count: 2048 Flash size : 512 Mb Write protection disabled. Connect successful. ECC Mode enabled. Opening "C:\Users\Renall\Downloads\SAMSUNG_95_GTS5830I_95_ FullFlash\SAMSUNG_GTS5830I_FullFlash.bin" file... Writing BOOT section. Please wait

[phung77]

lg D415 unlock ok by octoplus
Platform: LG Qualcomm
Selected port: COM20
Selected model: D415
Reading info...OK
Mode: Normal
Model ID: WX_PROJE: ÿd
Firmware compiled date: Mar 4 2014
Firmware compiled time: 16:27:29
Firmware released date: Mar 4 2014
Firmware released time: 16:27:29
SW Version: M8626A-AAAANAZM-1.0.6038
IMEI: 014009-00-515719-8
Unlocking...
Reading NVM...OK
Backup saved to "D415_014009005157198_29-07-2014_13-23-36.NVM"
Switching to Download mode...OK
Initializing flash...OK
Reading partition...OK
Reading security area...OK
Backup saved to "D415_014009005157198_29-07-2014_13-25-45.SEC"
Writing security area...OK
Switching to Normal mode...
Found model WX_PROJE: ÿd at port COM20
Checking data...OK
Writing NVM...OK
NVM succesfully repaired.
Phone successfully unlocked!

[phung77]

repair boot s5360 ok octoplus
Opening "C:\Users\Renall\Downloads\SAMSUNG_GTS5360_Repair. mf" file... Writing BOOT section. Please wait... Done Writing UPCH section. Please wait... Done Disconnected Repair done.