+ Trả lời bài viết
Trang 1 của 2 1 2 CuốiCuối
Kết quả 1 tới 10 của 11
  1. #1
    Thành viên chính thức xauxilx2005's Avatar
    Ngày tham gia
    Jul 2007
    Bài viết
    85
    Cám ơn !!!
    12
    Thanked 8 Times in 6 Posts

    Question K770i flash GDFS k được nhờ anh em giúp đỡ?

    1/4/2009 10:56:59 AM v0.915020/UNI
    1/4/2009 10:56:59 AM CARD SERIAL: xxxxxxx
    1/4/2009 10:56:59 AM Loaded 51 flash descriptors
    1/4/2009 10:57:04 AM Open COM port OK
    1/4/2009 10:57:06 AM ChipID:9900,EMP protocol:0301
    1/4/2009 10:57:06 AM Speed:921600
    1/4/2009 10:57:07 AM Flash ID check:897E
    1/4/2009 10:57:07 AM Flash props sent ok
    1/4/2009 10:57:07 AM OTP: LOCKED:1 CID:51 PAF:1 IMEI:35223902729775 CERT:N/A
    1/4/2009 10:57:07 AM FLASH CID:52 COLOR:RED
    1/4/2009 10:58:07 AM setGDFS_params failed
    1/4/2009 10:58:07 AM failed to setup GDFS
    1/4/2009 10:58:08 AM Elapsed: 63 secs.
    1/4/2009 10:58:40 AM TESTPOINT REPAIR STAGE #1 STARTED
    1/4/2009 10:58:41 AM Open COM port OK
    1/4/2009 10:58:53 AM ChipID:9900,EMP protocol:0301
    1/4/2009 10:58:53 AM Speed:921600
    1/4/2009 10:58:53 AM OTP: LOCKED:1 CID:51 PAF:1 IMEI:35223902729775 CERT:N/A
    1/4/2009 10:58:53 AM FLASH CID:52 COLOR:RED
    1/4/2009 10:58:55 AM LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
    1/4/2009 10:58:55 AM PREPARING...
    1/4/2009 10:59:02 AM ATTACH TP #1 AND PRESS "READY"
    1/4/2009 10:59:20 AM RELEASE TP #1 AND PRESS "READY"
    1/4/2009 10:59:32 AM TP #1 LOOKS OKAY
    1/4/2009 10:59:42 AM DONE
    1/4/2009 10:59:42 AM TESTPOINT REPAIR STAGE #2 STARTED
    1/4/2009 10:59:43 AM Open COM port OK
    1/4/2009 10:59:44 AM ATTACH TP #2 AND PRESS "READY"
    1/4/2009 10:59:52 AM Trying to launch embedded bootloader...
    1/4/2009 11:00:32 AM TP #2 INCORRECT OR STAGE #1 NOT EXECUTED
    1/4/2009 11:00:33 AM PROCEDURE WAS STOPPED BY USER
    1/4/2009 11:00:33 AM Elapsed: 113 secs.
    1/4/2009 11:03:24 AM Open COM port OK
    1/4/2009 11:03:28 AM ChipID:9900,EMP protocol:0301
    1/4/2009 11:03:28 AM Speed:921600
    1/4/2009 11:03:29 AM Flash ID check:897E
    1/4/2009 11:03:29 AM Flash props sent ok
    1/4/2009 11:03:29 AM OTP: LOCKED:1 CID:51 PAF:1 IMEI:35223902729775 CERT:N/A
    1/4/2009 11:03:29 AM FLASH CID:52 COLOR:RED
    1/4/2009 11:04:29 AM setGDFS_params failed
    1/4/2009 11:04:29 AM failed to setup GDFS
    1/4/2009 11:04:30 AM Elapsed: 65 secs.
    1/4/2009 11:04:38 AM TESTPOINT REPAIR STAGE #1 STARTED
    1/4/2009 11:04:38 AM Open COM port OK
    1/4/2009 11:04:48 AM ChipID:9900,EMP protocol:0301
    1/4/2009 11:04:48 AM Speed:921600
    1/4/2009 11:04:49 AM OTP: LOCKED:1 CID:51 PAF:1 IMEI:35223902729775 CERT:N/A
    1/4/2009 11:04:49 AM FLASH CID:52 COLOR:RED
    1/4/2009 11:04:50 AM LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
    1/4/2009 11:04:50 AM PREPARING...
    1/4/2009 11:04:57 AM ATTACH TP #1 AND PRESS "READY"
    1/4/2009 11:05:06 AM RELEASE TP #1 AND PRESS "READY"
    1/4/2009 11:05:15 AM TP #1 LOOKS OKAY
    1/4/2009 11:05:24 AM DONE
    1/4/2009 11:05:24 AM TESTPOINT REPAIR STAGE #2 STARTED
    1/4/2009 11:05:25 AM Open COM port OK
    1/4/2009 11:05:26 AM ATTACH TP #2 AND PRESS "READY"
    1/4/2009 11:05:31 AM Trying to launch embedded bootloader...
    1/4/2009 11:05:31 AM TP #2 LOOKS OKAY
    1/4/2009 11:05:31 AM RELEASE TP #2 AND PRESS "READY"
    1/4/2009 11:05:38 AM INT LDRB2020_PRELOADER_FOR_SETOOL2
    1/4/2009 11:05:42 AM WRITING EROM...
    1/4/2009 11:05:45 AM DONE
    1/4/2009 11:05:46 AM Elapsed: 68 secs.
    1/4/2009 11:06:09 AM Open COM port OK
    1/4/2009 11:06:09 AM ChipID:9900,EMP protocol:0301
    1/4/2009 11:06:09 AM Speed:921600
    1/4/2009 11:06:10 AM OTP: LOCKED:1 CID:51 PAF:1 IMEI:35223902729775 CERT:N/A
    1/4/2009 11:06:10 AM FLASH CID:52 COLOR:RED
    1/4/2009 11:06:10 AM phone CID not supported in that mode
    1/4/2009 11:06:11 AM Elapsed: 1 secs.
    1/4/2009 11:11:32 AM Open COM port OK
    1/4/2009 11:11:50 AM FAILED TO SETUP PHONE
    1/4/2009 11:11:50 AM PROCEDURE WAS STOPPED BY USER
    1/4/2009 11:11:50 AM Elapsed: 18 secs.
    1/4/2009 11:11:59 AM RECOVERY MODE STARTED
    1/4/2009 11:11:59 AM DB2020 EROM UPGRADE STARTED
    1/4/2009 11:11:59 AM Open COM port OK
    1/4/2009 11:12:00 AM OTP: LOCKED:1 CID:51 PAF:1 IMEI:35223902729775 CERT:N/A
    1/4/2009 11:12:01 AM FLASH CID:52 COLOR:RED
    1/4/2009 11:12:01 AM phone CID not supported in that mode
    1/4/2009 11:12:01 AM Elapsed: 1 secs.

    Mình test point báo ok hết nhưng khi viết gdfs nó báo "phone CID not supported in that mode" k cho viết anh em xem hộ dùm mình coi nó bị gì.

    Và cho mình hỏi K770i test point nó có 3 điểm testpoint là sao A1, A19 vàDQ0 ta chỉ chít TP A1 và TP A19 thôi phải k?

    Và trong bảng Empty Fill&Repair ở mục SELECT CID:ta chọn đúng CID theo máy phải không ????

  2. #2
    Thành viên chính thức xauxilx2005's Avatar
    Ngày tham gia
    Jul 2007
    Bài viết
    85
    Cám ơn !!!
    12
    Thanked 8 Times in 6 Posts

    Mặc định

    Một ngày lại trôi qua khách thì lại đòi máy buồn quá k anh em nào giúp hết vậy trời

  3. #3
    V.I.P NguyênChương-XM's Avatar
    Ngày tham gia
    Jun 2008
    Địa điểm
    103.PHT.TP.VŨNG TÀU
    Bài viết
    312
    Cám ơn !!!
    7
    Thanked 76 Times in 53 Posts

    Mặc định

    SE free repair gdfs nên không phải con naò cũng repair được . Nếu thao tác chuẩn mà vẫn not ok thì nên kiếm ai có DB repair giúp .
    CÂY THẲNG LÊN NHỜ UỐN , NGƯỜI KHÔN LÊN NHỜ NGƯỜI

  4. #4
    Thành viên chính thức tranloctran's Avatar
    Ngày tham gia
    Feb 2007
    Bài viết
    52
    Cám ơn !!!
    4
    Thanked 9 Times in 7 Posts

    Mặc định

    Trích Được post bởi xauxilx2005 Xem bài viết
    1/4/2009 10:56:59 AM v0.915020/UNI
    1/4/2009 10:56:59 AM CARD SERIAL: xxxxxxx
    1/4/2009 10:56:59 AM Loaded 51 flash descriptors
    1/4/2009 10:57:04 AM Open COM port OK
    1/4/2009 10:57:06 AM ChipID:9900,EMP protocol:0301
    1/4/2009 10:57:06 AM Speed:921600
    1/4/2009 10:57:07 AM Flash ID check:897E
    1/4/2009 10:57:07 AM Flash props sent ok
    1/4/2009 10:57:07 AM OTP: LOCKED:1 CID:51 PAF:1 IMEI:35223902729775 CERT:N/A
    1/4/2009 10:57:07 AM FLASH CID:52 COLOR:RED
    1/4/2009 10:58:07 AM setGDFS_params failed
    1/4/2009 10:58:07 AM failed to setup GDFS
    1/4/2009 10:58:08 AM Elapsed: 63 secs.
    1/4/2009 10:58:40 AM TESTPOINT REPAIR STAGE #1 STARTED
    1/4/2009 10:58:41 AM Open COM port OK
    1/4/2009 10:58:53 AM ChipID:9900,EMP protocol:0301
    1/4/2009 10:58:53 AM Speed:921600
    1/4/2009 10:58:53 AM OTP: LOCKED:1 CID:51 PAF:1 IMEI:35223902729775 CERT:N/A
    1/4/2009 10:58:53 AM FLASH CID:52 COLOR:RED
    1/4/2009 10:58:55 AM LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
    1/4/2009 10:58:55 AM PREPARING...
    1/4/2009 10:59:02 AM ATTACH TP #1 AND PRESS "READY"
    1/4/2009 10:59:20 AM RELEASE TP #1 AND PRESS "READY"
    1/4/2009 10:59:32 AM TP #1 LOOKS OKAY
    1/4/2009 10:59:42 AM DONE
    1/4/2009 10:59:42 AM TESTPOINT REPAIR STAGE #2 STARTED
    1/4/2009 10:59:43 AM Open COM port OK
    1/4/2009 10:59:44 AM ATTACH TP #2 AND PRESS "READY"
    1/4/2009 10:59:52 AM Trying to launch embedded bootloader...
    1/4/2009 11:00:32 AM TP #2 INCORRECT OR STAGE #1 NOT EXECUTED
    1/4/2009 11:00:33 AM PROCEDURE WAS STOPPED BY USER
    1/4/2009 11:00:33 AM Elapsed: 113 secs.
    1/4/2009 11:03:24 AM Open COM port OK
    1/4/2009 11:03:28 AM ChipID:9900,EMP protocol:0301
    1/4/2009 11:03:28 AM Speed:921600
    1/4/2009 11:03:29 AM Flash ID check:897E
    1/4/2009 11:03:29 AM Flash props sent ok
    1/4/2009 11:03:29 AM OTP: LOCKED:1 CID:51 PAF:1 IMEI:35223902729775 CERT:N/A
    1/4/2009 11:03:29 AM FLASH CID:52 COLOR:RED
    1/4/2009 11:04:29 AM setGDFS_params failed
    1/4/2009 11:04:29 AM failed to setup GDFS
    1/4/2009 11:04:30 AM Elapsed: 65 secs.
    1/4/2009 11:04:38 AM TESTPOINT REPAIR STAGE #1 STARTED
    1/4/2009 11:04:38 AM Open COM port OK
    1/4/2009 11:04:48 AM ChipID:9900,EMP protocol:0301
    1/4/2009 11:04:48 AM Speed:921600
    1/4/2009 11:04:49 AM OTP: LOCKED:1 CID:51 PAF:1 IMEI:35223902729775 CERT:N/A
    1/4/2009 11:04:49 AM FLASH CID:52 COLOR:RED
    1/4/2009 11:04:50 AM LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
    1/4/2009 11:04:50 AM PREPARING...
    1/4/2009 11:04:57 AM ATTACH TP #1 AND PRESS "READY"
    1/4/2009 11:05:06 AM RELEASE TP #1 AND PRESS "READY"
    1/4/2009 11:05:15 AM TP #1 LOOKS OKAY
    1/4/2009 11:05:24 AM DONE
    1/4/2009 11:05:24 AM TESTPOINT REPAIR STAGE #2 STARTED
    1/4/2009 11:05:25 AM Open COM port OK
    1/4/2009 11:05:26 AM ATTACH TP #2 AND PRESS "READY"
    1/4/2009 11:05:31 AM Trying to launch embedded bootloader...
    1/4/2009 11:05:31 AM TP #2 LOOKS OKAY
    1/4/2009 11:05:31 AM RELEASE TP #2 AND PRESS "READY"
    1/4/2009 11:05:38 AM INT LDRB2020_PRELOADER_FOR_SETOOL2
    1/4/2009 11:05:42 AM WRITING EROM...
    1/4/2009 11:05:45 AM DONE
    1/4/2009 11:05:46 AM Elapsed: 68 secs.
    1/4/2009 11:06:09 AM Open COM port OK
    1/4/2009 11:06:09 AM ChipID:9900,EMP protocol:0301
    1/4/2009 11:06:09 AM Speed:921600
    1/4/2009 11:06:10 AM OTP: LOCKED:1 CID:51 PAF:1 IMEI:35223902729775 CERT:N/A
    1/4/2009 11:06:10 AM FLASH CID:52 COLOR:RED
    1/4/2009 11:06:10 AM phone CID not supported in that mode
    1/4/2009 11:06:11 AM Elapsed: 1 secs.
    1/4/2009 11:11:32 AM Open COM port OK
    1/4/2009 11:11:50 AM FAILED TO SETUP PHONE
    1/4/2009 11:11:50 AM PROCEDURE WAS STOPPED BY USER
    1/4/2009 11:11:50 AM Elapsed: 18 secs.
    1/4/2009 11:11:59 AM RECOVERY MODE STARTED
    1/4/2009 11:11:59 AM DB2020 EROM UPGRADE STARTED
    1/4/2009 11:11:59 AM Open COM port OK
    1/4/2009 11:12:00 AM OTP: LOCKED:1 CID:51 PAF:1 IMEI:35223902729775 CERT:N/A
    1/4/2009 11:12:01 AM FLASH CID:52 COLOR:RED
    1/4/2009 11:12:01 AM phone CID not supported in that mode
    1/4/2009 11:12:01 AM Elapsed: 1 secs.

    Mình test point báo ok hết nhưng khi viết gdfs nó báo "phone CID not supported in that mode" k cho viết anh em xem hộ dùm mình coi nó bị gì.

    Và cho mình hỏi K770i test point nó có 3 điểm testpoint là sao A1, A19 vàDQ0 ta chỉ chít TP A1 và TP A19 thôi phải k?

    Và trong bảng Empty Fill&Repair ở mục SELECT CID:ta chọn đúng CID theo máy phải không ????

    Bạn làm sai quá trình repair gdfs rồi, sau khi chít testpoint bạn phải nạp gdfs trước vì lúc đó flash cid của máy đã được đưa về CID49, sau đó bạn nạp erom đưa lên lại CID52 khi đó sẽ OK thui, chúc vuui

  5. #5
    Thành viên chính thức xauxilx2005's Avatar
    Ngày tham gia
    Jul 2007
    Bài viết
    85
    Cám ơn !!!
    12
    Thanked 8 Times in 6 Posts

    Mặc định

    Log Indentify:
    1/5/2009 7:51:43 PM v0.915030/UNI
    1/5/2009 7:51:43 PM CARD SERIAL: xxxxxxxxx
    1/5/2009 7:51:43 PM Loaded 51 flash descriptors
    1/5/2009 7:51:51 PM Open COM port OK
    1/5/2009 7:51:58 PM ChipID:9900,EMP protocol:0301
    1/5/2009 7:51:58 PM Speed:921600
    1/5/2009 7:51:59 PM Flash ID check:897E
    1/5/2009 7:51:59 PM Flash props sent ok
    1/5/2009 7:51:59 PM OTP: LOCKED:1 CID:51 PAF:1 IMEI:35223902729775 CERT:N/A
    1/5/2009 7:51:59 PM FLASH CID:52 COLOR:RED
    1/5/2009 7:52:30 PM no ack during gdfs_readvar !
    1/5/2009 7:52:30 PM SCRC READ FAILURE
    1/5/2009 7:52:30 PM Elapsed: 39 secs.

    Log testpoint:
    1/5/2009 7:54:47 PM TESTPOINT REPAIR STAGE #1 STARTED
    1/5/2009 7:54:47 PM Open COM port OK
    1/5/2009 7:54:51 PM ChipID:9900,EMP protocol:0301
    1/5/2009 7:54:51 PM Speed:921600
    1/5/2009 7:54:52 PM OTP: LOCKED:1 CID:51 PAF:1 IMEI:35223902729775 CERT:N/A
    1/5/2009 7:54:52 PM FLASH CID:52 COLOR:RED
    1/5/2009 7:54:53 PM LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
    1/5/2009 7:54:53 PM PREPARING...
    1/5/2009 7:55:50 PM TESTPOINT REPAIR STAGE #1 STARTED
    1/5/2009 7:55:51 PM Open COM port OK
    1/5/2009 7:55:51 PM ChipID:9900,EMP protocol:0301
    1/5/2009 7:55:51 PM Speed:921600
    1/5/2009 7:55:52 PM OTP: LOCKED:1 CID:51 PAF:1 IMEI:35223902729775 CERT:N/A
    1/5/2009 7:55:52 PM FLASH CID:52 COLOR:RED
    1/5/2009 7:55:53 PM LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
    1/5/2009 7:55:53 PM PREPARING...
    1/5/2009 7:56:00 PM ATTACH TP #1 AND PRESS "READY"
    1/5/2009 7:56:07 PM RELEASE TP #1 AND PRESS "READY"
    1/5/2009 7:56:14 PM TP #1 LOOKS OKAY
    1/5/2009 7:56:23 PM DONE
    1/5/2009 7:56:23 PM TESTPOINT REPAIR STAGE #2 STARTED
    1/5/2009 7:56:24 PM Open COM port OK
    1/5/2009 7:56:25 PM ATTACH TP #2 AND PRESS "READY"
    1/5/2009 7:56:36 PM Trying to launch embedded bootloader...
    1/5/2009 7:56:36 PM TP #2 LOOKS OKAY
    1/5/2009 7:56:36 PM RELEASE TP #2 AND PRESS "READY"
    1/5/2009 7:56:43 PM INT LDRB2020_PRELOADER_FOR_SETOOL2
    1/5/2009 7:56:47 PM WRITING EROM...
    1/5/2009 7:56:50 PM DONE
    1/5/2009 7:56:51 PM Elapsed: 60 secs.

    Và log viết GDFS Đây:
    1/5/2009 7:58:59 PM SIGNED MODE (USING SERVER)
    1/5/2009 7:59:01 PM Open COM port OK
    1/5/2009 7:59:01 PM ChipID:9900,EMP protocol:0301
    1/5/2009 7:59:01 PM Speed:921600
    1/5/2009 7:59:02 PM OTP: LOCKED:1 CID:51 PAF:1 IMEI:35223902729775 CERT:N/A
    1/5/2009 7:59:02 PM FLASH CID:52 COLOR:RED
    1/5/2009 7:59:05 PM PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
    1/5/2009 7:59:06 PM LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
    1/5/2009 7:59:06 PM Flash ID check:897E
    1/5/2009 7:59:06 PM Flash props sent ok
    1/5/2009 7:59:06 PM writing "D:\DIEN THOAI\BOX Setool_3\File setool\Sony Ericsson\K770\cid52\K770_GDFS_SSW.ssw"
    1/5/2009 7:59:07 PM CURRENT FLASH FILE CID:49
    1/5/2009 7:59:07 PM SSW uses full hash, hash len is:640
    1/5/2009 7:59:07 PM HDR block not accepted,error: 19
    1/5/2009 7:59:08 PM Elapsed: 8 secs.
    testpoint xong ok hết tới viết GDFS nó báo lỗi anh em xem coi nó bi lổi gì dùm mình nhé

  6. #6
    Thành viên mới trương văn huy's Avatar
    Ngày tham gia
    Oct 2006
    Bài viết
    41
    Cám ơn !!!
    8
    Thanked 1 Time in 1 Post

    Mặc định

    Chết flash kiếm flash thay vào

  7. #7
    Thành viên chính thức xauxilx2005's Avatar
    Ngày tham gia
    Jul 2007
    Bài viết
    85
    Cám ơn !!!
    12
    Thanked 8 Times in 6 Posts

    Talking

    Trích Được post bởi trương văn huy Xem bài viết
    Chết flash kiếm flash thay vào
    bạn chỉ dùm mình cái log báo chết flash coi..Nếu chết flash thì máy nào có thể thay flash qua trừ flash K770i .
    chứ trả lời tào lào thì đừng trả lời biết hông.Đây là room trao đổi kinh nghiệm chứ trả lời để có bài viết thì uot chổ khác nhé.

  8. #8
    T4M
    T4M vẫn chưa có mặt trong diễn đàn
    V.I.P T4M's Avatar
    Ngày tham gia
    Jun 2007
    Địa điểm
    Lò mổ IC
    Bài viết
    331
    Cám ơn !!!
    66
    Thanked 125 Times in 86 Posts

    Mặc định

    Bạn sử dụng lại version v.914037 nhé.
    Lỗi ở đây là máy bạn chưa BROWN.
    TRUNG TÂM SỬA CHỮA & BẢO HÀNH ĐTDĐ T4M
    SỬA CHỮA CHUYÊN NGHIỆP-UNLOCK,CHUYỂN HỆ,SỬA LỖI PHẦN MỀM
    40b,NGUYỄN THÁI BÌNH,P.4,Q.TB ÐT: (08)62966082-(08)73000234 YH&SKY: t4_mobile

  9. #9
    T4M
    T4M vẫn chưa có mặt trong diễn đàn
    V.I.P T4M's Avatar
    Ngày tham gia
    Jun 2007
    Địa điểm
    Lò mổ IC
    Bài viết
    331
    Cám ơn !!!
    66
    Thanked 125 Times in 86 Posts

    Mặc định

    Bạn làm theo trình tự nay nhé:

    Code:
    v0.914037
    
    - added testpoint for db2020 phones.
      db2020 testpoint idea made by dre_ambox team. 
      as i respected that, i not included db2020 testpoint in setool2 
      for a long time. but anything ends sometime.
      now, setool2 users can enjoy gdfs db2020 gdfs repair.
    
      usage: 
      1. it is only and only for professionals. 
         users,advanced users, please "go away".
      2. testpoint is +3.3 voltage, connected to specific pin. 
         we suggesting to use +3.3v battery 
         (battery ground MUST be connected with phone's GROUND)
      3. go to emptyboard fill & repair.
      4. select any db2020 model.
      5. press "TP STAGE #1". read instructions and execute them.
      6. press "TP STAGE #2". read instructions and execute them.
      7. phone is BROWN now. 
      8. staying on "emptyboard fill and repair" write correct gdfs_in_ssw format.
      9. if flashing went fine, flash db2020 erom with needed CID.
      10. phone now retail and repaired. fullflash phone as usual.
      testpoint pictures (courtesy of drea_mbox team) included.
      after SETOOL2 db2020 testpoint procedure phone FULLY 
      working in "alternative security bypass" mode without ANY restrictions.
    Goodluck.
    TRUNG TÂM SỬA CHỮA & BẢO HÀNH ĐTDĐ T4M
    SỬA CHỮA CHUYÊN NGHIỆP-UNLOCK,CHUYỂN HỆ,SỬA LỖI PHẦN MỀM
    40b,NGUYỄN THÁI BÌNH,P.4,Q.TB ÐT: (08)62966082-(08)73000234 YH&SKY: t4_mobile

  10. #10
    Thành viên chính thức xauxilx2005's Avatar
    Ngày tham gia
    Jul 2007
    Bài viết
    85
    Cám ơn !!!
    12
    Thanked 8 Times in 6 Posts

    Mặc định

    Trích Được post bởi t4_mobile Xem bài viết
    Bạn làm theo trình tự nay nhé:

    Code:
    v0.914037
    
    - added testpoint for db2020 phones.
      db2020 testpoint idea made by dre_ambox team. 
      as i respected that, i not included db2020 testpoint in setool2 
      for a long time. but anything ends sometime.
      now, setool2 users can enjoy gdfs db2020 gdfs repair.
    
      usage: 
      1. it is only and only for professionals. 
         users,advanced users, please "go away".
      2. testpoint is +3.3 voltage, connected to specific pin. 
         we suggesting to use +3.3v battery 
         (battery ground MUST be connected with phone's GROUND)
      3. go to emptyboard fill & repair.
      4. select any db2020 model.
      5. press "TP STAGE #1". read instructions and execute them.
      6. press "TP STAGE #2". read instructions and execute them.
      7. phone is BROWN now. 
      8. staying on "emptyboard fill and repair" write correct gdfs_in_ssw format.
      9. if flashing went fine, flash db2020 erom with needed CID.
      10. phone now retail and repaired. fullflash phone as usual.
      testpoint pictures (courtesy of drea_mbox team) included.
      after SETOOL2 db2020 testpoint procedure phone FULLY 
      working in "alternative security bypass" mode without ANY restrictions.
    Goodluck.
    ok để mình làm theo cách bạn sẽ báo tin cho anh em biết

+ Trả lời bài viết
Trang 1 của 2 1 2 CuốiCuối

Thread Information

Users Browsing this Thread

Hiện có 1 người đang xem bài này . Bao gồm : 0 thành viên và 1 khách

     

Similar Threads

  1. K770i cần giúp đỡ!!!!!!!!!!!!!!
    By thaomobilecntv in forum Phần mềm Sony-Ericsson
    Trả lời: 1
    Bài viết cuối: 20-03-2011, 23:04
  2. các bác ơi giúp em kon k770i này với
    By azura89 in forum Các loại models mới Sony-Ericsson
    Trả lời: 1
    Bài viết cuối: 19-11-2010, 16:05
  3. w580 repair gdfs ok nhưng ko flash được
    By minhnhut777 in forum Phần mềm Sony-Ericsson
    Trả lời: 1
    Bài viết cuối: 09-11-2010, 09:55
  4. k770i liệt phím số 5 xin giúp
    By tuananh65 in forum SONY-ERICSSON Models củ
    Trả lời: 0
    Bài viết cuối: 17-09-2010, 23:13
  5. Xin giúp K770i đứt đường Mic
    By dienthoaiminhthu in forum Các loại models mới Sony-Ericsson
    Trả lời: 0
    Bài viết cuối: 19-12-2008, 12:48

Quyền viết bài

  • Bạn không thể tạo chủ đề mới
  • Bạn không thể gửi trả lời
  • Bạn không thể gửi đính kèm
  • Bạn không thể sửa bài viết của bạn
Lên đầu trang
thiet bi sua chua slim sim, heicard, sim ghep Firmware android giải pháp nhà thông minh