K770i flash GDFS k được nhờ anh em giúp đỡ?

**xauxilx2005** · 04-01-2009 16:44

1/4/2009 10:56:59 AM v0.915020/UNI
1/4/2009 10:56:59 AM CARD SERIAL: xxxxxxx
1/4/2009 10:56:59 AM Loaded 51 flash descriptors
1/4/2009 10:57:04 AM Open COM port OK
1/4/2009 10:57:06 AM ChipID:9900,EMP protocol:0301
1/4/2009 10:57:06 AM Speed:921600
1/4/2009 10:57:07 AM Flash ID check:897E
1/4/2009 10:57:07 AM Flash props sent ok
1/4/2009 10:57:07 AM OTP: LOCKED:1 CID:51 PAF:1 IMEI:35223902729775 CERT:N/A
1/4/2009 10:57:07 AM FLASH CID:52 COLOR:RED
1/4/2009 10:58:07 AM setGDFS_params failed
1/4/2009 10:58:07 AM failed to setup GDFS
1/4/2009 10:58:08 AM Elapsed: 63 secs.
1/4/2009 10:58:40 AM TESTPOINT REPAIR STAGE #1 STARTED
1/4/2009 10:58:41 AM Open COM port OK
1/4/2009 10:58:53 AM ChipID:9900,EMP protocol:0301
1/4/2009 10:58:53 AM Speed:921600
1/4/2009 10:58:53 AM OTP: LOCKED:1 CID:51 PAF:1 IMEI:35223902729775 CERT:N/A
1/4/2009 10:58:53 AM FLASH CID:52 COLOR:RED
1/4/2009 10:58:55 AM LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
1/4/2009 10:58:55 AM PREPARING...
1/4/2009 10:59:02 AM ATTACH TP #1 AND PRESS "READY"
1/4/2009 10:59:20 AM RELEASE TP #1 AND PRESS "READY"
1/4/2009 10:59:32 AM TP #1 LOOKS OKAY
1/4/2009 10:59:42 AM DONE
1/4/2009 10:59:42 AM TESTPOINT REPAIR STAGE #2 STARTED
1/4/2009 10:59:43 AM Open COM port OK
1/4/2009 10:59:44 AM ATTACH TP #2 AND PRESS "READY"
1/4/2009 10:59:52 AM Trying to launch embedded bootloader...
1/4/2009 11:00:32 AM TP #2 INCORRECT OR STAGE #1 NOT EXECUTED
1/4/2009 11:00:33 AM PROCEDURE WAS STOPPED BY USER
1/4/2009 11:00:33 AM Elapsed: 113 secs.
1/4/2009 11:03:24 AM Open COM port OK
1/4/2009 11:03:28 AM ChipID:9900,EMP protocol:0301
1/4/2009 11:03:28 AM Speed:921600
1/4/2009 11:03:29 AM Flash ID check:897E
1/4/2009 11:03:29 AM Flash props sent ok
1/4/2009 11:03:29 AM OTP: LOCKED:1 CID:51 PAF:1 IMEI:35223902729775 CERT:N/A
1/4/2009 11:03:29 AM FLASH CID:52 COLOR:RED
1/4/2009 11:04:29 AM setGDFS_params failed
1/4/2009 11:04:29 AM failed to setup GDFS
1/4/2009 11:04:30 AM Elapsed: 65 secs.
1/4/2009 11:04:38 AM TESTPOINT REPAIR STAGE #1 STARTED
1/4/2009 11:04:38 AM Open COM port OK
1/4/2009 11:04:48 AM ChipID:9900,EMP protocol:0301
1/4/2009 11:04:48 AM Speed:921600
1/4/2009 11:04:49 AM OTP: LOCKED:1 CID:51 PAF:1 IMEI:35223902729775 CERT:N/A
1/4/2009 11:04:49 AM FLASH CID:52 COLOR:RED
1/4/2009 11:04:50 AM LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
1/4/2009 11:04:50 AM PREPARING...
1/4/2009 11:04:57 AM ATTACH TP #1 AND PRESS "READY"
1/4/2009 11:05:06 AM RELEASE TP #1 AND PRESS "READY"
1/4/2009 11:05:15 AM TP #1 LOOKS OKAY
1/4/2009 11:05:24 AM DONE
1/4/2009 11:05:24 AM TESTPOINT REPAIR STAGE #2 STARTED
1/4/2009 11:05:25 AM Open COM port OK
1/4/2009 11:05:26 AM ATTACH TP #2 AND PRESS "READY"
1/4/2009 11:05:31 AM Trying to launch embedded bootloader...
1/4/2009 11:05:31 AM TP #2 LOOKS OKAY
1/4/2009 11:05:31 AM RELEASE TP #2 AND PRESS "READY"
1/4/2009 11:05:38 AM INT LDRB2020_PRELOADER_FOR_SETOOL2
1/4/2009 11:05:42 AM WRITING EROM...
1/4/2009 11:05:45 AM DONE
1/4/2009 11:05:46 AM Elapsed: 68 secs.
1/4/2009 11:06:09 AM Open COM port OK
1/4/2009 11:06:09 AM ChipID:9900,EMP protocol:0301
1/4/2009 11:06:09 AM Speed:921600
1/4/2009 11:06:10 AM OTP: LOCKED:1 CID:51 PAF:1 IMEI:35223902729775 CERT:N/A
1/4/2009 11:06:10 AM FLASH CID:52 COLOR:RED
1/4/2009 11:06:10 AM phone CID not supported in that mode
1/4/2009 11:06:11 AM Elapsed: 1 secs.
1/4/2009 11:11:32 AM Open COM port OK
1/4/2009 11:11:50 AM FAILED TO SETUP PHONE
1/4/2009 11:11:50 AM PROCEDURE WAS STOPPED BY USER
1/4/2009 11:11:50 AM Elapsed: 18 secs.
1/4/2009 11:11:59 AM RECOVERY MODE STARTED
1/4/2009 11:11:59 AM DB2020 EROM UPGRADE STARTED
1/4/2009 11:11:59 AM Open COM port OK
1/4/2009 11:12:00 AM OTP: LOCKED:1 CID:51 PAF:1 IMEI:35223902729775 CERT:N/A
1/4/2009 11:12:01 AM FLASH CID:52 COLOR:RED
1/4/2009 11:12:01 AM phone CID not supported in that mode
1/4/2009 11:12:01 AM Elapsed: 1 secs.

Mình test point báo ok hết nhưng khi viết gdfs nó báo "phone CID not supported in that mode" k cho viết anh em xem hộ dùm mình coi nó bị gì.

Và cho mình hỏi K770i test point nó có 3 điểm testpoint là sao A1, A19 vàDQ0 ta chỉ chít TP A1 và TP A19 thôi phải k?

Và trong bảng Empty Fill&Repair ở mục SELECT CID:ta chọn đúng CID theo máy phải không ????

**xauxilx2005** · 05-01-2009 16:46

Một ngày lại trôi qua khách thì lại đòi máy buồn quá k anh em nào giúp hết vậy trời

**NguyênChương-XM** · 05-01-2009 16:57

SE free repair gdfs nên không phải con naò cũng repair được . Nếu thao tác chuẩn mà vẫn not ok thì nên kiếm ai có DB repair giúp .

**tranloctran** · 05-01-2009 18:12

Được post bởi xauxilx2005

1/4/2009 10:56:59 AM v0.915020/UNI
1/4/2009 10:56:59 AM CARD SERIAL: xxxxxxx
1/4/2009 10:56:59 AM Loaded 51 flash descriptors
1/4/2009 10:57:04 AM Open COM port OK
1/4/2009 10:57:06 AM ChipID:9900,EMP protocol:0301
1/4/2009 10:57:06 AM Speed:921600
1/4/2009 10:57:07 AM Flash ID check:897E
1/4/2009 10:57:07 AM Flash props sent ok
1/4/2009 10:57:07 AM OTP: LOCKED:1 CID:51 PAF:1 IMEI:35223902729775 CERT:N/A
1/4/2009 10:57:07 AM FLASH CID:52 COLOR:RED
1/4/2009 10:58:07 AM setGDFS_params failed
1/4/2009 10:58:07 AM failed to setup GDFS
1/4/2009 10:58:08 AM Elapsed: 63 secs.
1/4/2009 10:58:40 AM TESTPOINT REPAIR STAGE #1 STARTED
1/4/2009 10:58:41 AM Open COM port OK
1/4/2009 10:58:53 AM ChipID:9900,EMP protocol:0301
1/4/2009 10:58:53 AM Speed:921600
1/4/2009 10:58:53 AM OTP: LOCKED:1 CID:51 PAF:1 IMEI:35223902729775 CERT:N/A
1/4/2009 10:58:53 AM FLASH CID:52 COLOR:RED
1/4/2009 10:58:55 AM LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
1/4/2009 10:58:55 AM PREPARING...
1/4/2009 10:59:02 AM ATTACH TP #1 AND PRESS "READY"
1/4/2009 10:59:20 AM RELEASE TP #1 AND PRESS "READY"
1/4/2009 10:59:32 AM TP #1 LOOKS OKAY
1/4/2009 10:59:42 AM DONE
1/4/2009 10:59:42 AM TESTPOINT REPAIR STAGE #2 STARTED
1/4/2009 10:59:43 AM Open COM port OK
1/4/2009 10:59:44 AM ATTACH TP #2 AND PRESS "READY"
1/4/2009 10:59:52 AM Trying to launch embedded bootloader...
1/4/2009 11:00:32 AM TP #2 INCORRECT OR STAGE #1 NOT EXECUTED
1/4/2009 11:00:33 AM PROCEDURE WAS STOPPED BY USER
1/4/2009 11:00:33 AM Elapsed: 113 secs.
1/4/2009 11:03:24 AM Open COM port OK
1/4/2009 11:03:28 AM ChipID:9900,EMP protocol:0301
1/4/2009 11:03:28 AM Speed:921600
1/4/2009 11:03:29 AM Flash ID check:897E
1/4/2009 11:03:29 AM Flash props sent ok
1/4/2009 11:03:29 AM OTP: LOCKED:1 CID:51 PAF:1 IMEI:35223902729775 CERT:N/A
1/4/2009 11:03:29 AM FLASH CID:52 COLOR:RED
1/4/2009 11:04:29 AM setGDFS_params failed
1/4/2009 11:04:29 AM failed to setup GDFS
1/4/2009 11:04:30 AM Elapsed: 65 secs.
1/4/2009 11:04:38 AM TESTPOINT REPAIR STAGE #1 STARTED
1/4/2009 11:04:38 AM Open COM port OK
1/4/2009 11:04:48 AM ChipID:9900,EMP protocol:0301
1/4/2009 11:04:48 AM Speed:921600
1/4/2009 11:04:49 AM OTP: LOCKED:1 CID:51 PAF:1 IMEI:35223902729775 CERT:N/A
1/4/2009 11:04:49 AM FLASH CID:52 COLOR:RED
1/4/2009 11:04:50 AM LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
1/4/2009 11:04:50 AM PREPARING...
1/4/2009 11:04:57 AM ATTACH TP #1 AND PRESS "READY"
1/4/2009 11:05:06 AM RELEASE TP #1 AND PRESS "READY"
1/4/2009 11:05:15 AM TP #1 LOOKS OKAY
1/4/2009 11:05:24 AM DONE
1/4/2009 11:05:24 AM TESTPOINT REPAIR STAGE #2 STARTED
1/4/2009 11:05:25 AM Open COM port OK
1/4/2009 11:05:26 AM ATTACH TP #2 AND PRESS "READY"
1/4/2009 11:05:31 AM Trying to launch embedded bootloader...
1/4/2009 11:05:31 AM TP #2 LOOKS OKAY
1/4/2009 11:05:31 AM RELEASE TP #2 AND PRESS "READY"
1/4/2009 11:05:38 AM INT LDRB2020_PRELOADER_FOR_SETOOL2
1/4/2009 11:05:42 AM WRITING EROM...
1/4/2009 11:05:45 AM DONE
1/4/2009 11:05:46 AM Elapsed: 68 secs.
1/4/2009 11:06:09 AM Open COM port OK
1/4/2009 11:06:09 AM ChipID:9900,EMP protocol:0301
1/4/2009 11:06:09 AM Speed:921600
1/4/2009 11:06:10 AM OTP: LOCKED:1 CID:51 PAF:1 IMEI:35223902729775 CERT:N/A
1/4/2009 11:06:10 AM FLASH CID:52 COLOR:RED
1/4/2009 11:06:10 AM phone CID not supported in that mode
1/4/2009 11:06:11 AM Elapsed: 1 secs.
1/4/2009 11:11:32 AM Open COM port OK
1/4/2009 11:11:50 AM FAILED TO SETUP PHONE
1/4/2009 11:11:50 AM PROCEDURE WAS STOPPED BY USER
1/4/2009 11:11:50 AM Elapsed: 18 secs.
1/4/2009 11:11:59 AM RECOVERY MODE STARTED
1/4/2009 11:11:59 AM DB2020 EROM UPGRADE STARTED
1/4/2009 11:11:59 AM Open COM port OK
1/4/2009 11:12:00 AM OTP: LOCKED:1 CID:51 PAF:1 IMEI:35223902729775 CERT:N/A
1/4/2009 11:12:01 AM FLASH CID:52 COLOR:RED
1/4/2009 11:12:01 AM phone CID not supported in that mode
1/4/2009 11:12:01 AM Elapsed: 1 secs.

Mình test point báo ok hết nhưng khi viết gdfs nó báo "phone CID not supported in that mode" k cho viết anh em xem hộ dùm mình coi nó bị gì.

Và cho mình hỏi K770i test point nó có 3 điểm testpoint là sao A1, A19 vàDQ0 ta chỉ chít TP A1 và TP A19 thôi phải k?

Và trong bảng Empty Fill&Repair ở mục SELECT CID:ta chọn đúng CID theo máy phải không ????

Bạn làm sai quá trình repair gdfs rồi, sau khi chít testpoint bạn phải nạp gdfs trước vì lúc đó flash cid của máy đã được đưa về CID49, sau đó bạn nạp erom đưa lên lại CID52 khi đó sẽ OK thui, chúc vuui

**xauxilx2005** · 05-01-2009 20:01

Log Indentify:
1/5/2009 7:51:43 PM v0.915030/UNI
1/5/2009 7:51:43 PM CARD SERIAL: xxxxxxxxx
1/5/2009 7:51:43 PM Loaded 51 flash descriptors
1/5/2009 7:51:51 PM Open COM port OK
1/5/2009 7:51:58 PM ChipID:9900,EMP protocol:0301
1/5/2009 7:51:58 PM Speed:921600
1/5/2009 7:51:59 PM Flash ID check:897E
1/5/2009 7:51:59 PM Flash props sent ok
1/5/2009 7:51:59 PM OTP: LOCKED:1 CID:51 PAF:1 IMEI:35223902729775 CERT:N/A
1/5/2009 7:51:59 PM FLASH CID:52 COLOR:RED
1/5/2009 7:52:30 PM no ack during gdfs_readvar !
1/5/2009 7:52:30 PM SCRC READ FAILURE
1/5/2009 7:52:30 PM Elapsed: 39 secs.

Log testpoint:
1/5/2009 7:54:47 PM TESTPOINT REPAIR STAGE #1 STARTED
1/5/2009 7:54:47 PM Open COM port OK
1/5/2009 7:54:51 PM ChipID:9900,EMP protocol:0301
1/5/2009 7:54:51 PM Speed:921600
1/5/2009 7:54:52 PM OTP: LOCKED:1 CID:51 PAF:1 IMEI:35223902729775 CERT:N/A
1/5/2009 7:54:52 PM FLASH CID:52 COLOR:RED
1/5/2009 7:54:53 PM LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
1/5/2009 7:54:53 PM PREPARING...
1/5/2009 7:55:50 PM TESTPOINT REPAIR STAGE #1 STARTED
1/5/2009 7:55:51 PM Open COM port OK
1/5/2009 7:55:51 PM ChipID:9900,EMP protocol:0301
1/5/2009 7:55:51 PM Speed:921600
1/5/2009 7:55:52 PM OTP: LOCKED:1 CID:51 PAF:1 IMEI:35223902729775 CERT:N/A
1/5/2009 7:55:52 PM FLASH CID:52 COLOR:RED
1/5/2009 7:55:53 PM LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
1/5/2009 7:55:53 PM PREPARING...
1/5/2009 7:56:00 PM ATTACH TP #1 AND PRESS "READY"
1/5/2009 7:56:07 PM RELEASE TP #1 AND PRESS "READY"
1/5/2009 7:56:14 PM TP #1 LOOKS OKAY
1/5/2009 7:56:23 PM DONE
1/5/2009 7:56:23 PM TESTPOINT REPAIR STAGE #2 STARTED
1/5/2009 7:56:24 PM Open COM port OK
1/5/2009 7:56:25 PM ATTACH TP #2 AND PRESS "READY"
1/5/2009 7:56:36 PM Trying to launch embedded bootloader...
1/5/2009 7:56:36 PM TP #2 LOOKS OKAY
1/5/2009 7:56:36 PM RELEASE TP #2 AND PRESS "READY"
1/5/2009 7:56:43 PM INT LDR

B2020_PRELOADER_FOR_SETOOL2
1/5/2009 7:56:47 PM WRITING EROM...
1/5/2009 7:56:50 PM DONE
1/5/2009 7:56:51 PM Elapsed: 60 secs.

Và log viết GDFS Đây:
1/5/2009 7:58:59 PM SIGNED MODE (USING SERVER)
1/5/2009 7:59:01 PM Open COM port OK
1/5/2009 7:59:01 PM ChipID:9900,EMP protocol:0301
1/5/2009 7:59:01 PM Speed:921600
1/5/2009 7:59:02 PM OTP: LOCKED:1 CID:51 PAF:1 IMEI:35223902729775 CERT:N/A
1/5/2009 7:59:02 PM FLASH CID:52 COLOR:RED
1/5/2009 7:59:05 PM PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
1/5/2009 7:59:06 PM LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
1/5/2009 7:59:06 PM Flash ID check:897E
1/5/2009 7:59:06 PM Flash props sent ok
1/5/2009 7:59:06 PM writing "D:\DIEN THOAI\BOX Setool_3\File setool\Sony Ericsson\K770\cid52\K770_GDFS_SSW.ssw"
1/5/2009 7:59:07 PM CURRENT FLASH FILE CID:49
1/5/2009 7:59:07 PM SSW uses full hash, hash len is:640
1/5/2009 7:59:07 PM HDR block not accepted,error: 19
1/5/2009 7:59:08 PM Elapsed: 8 secs.
testpoint xong ok hết tới viết GDFS nó báo lỗi anh em xem coi nó bi lổi gì dùm mình nhé

**trương văn huy** · 06-01-2009 19:37

Chết flash kiếm flash thay vào

**xauxilx2005** · 06-01-2009 20:01

Được post bởi trương văn huy

Chết flash kiếm flash thay vào

bạn chỉ dùm mình cái log báo chết flash coi.

.Nếu chết flash thì máy nào có thể thay flash qua trừ flash K770i

.
chứ trả lời tào lào thì đừng trả lời biết hông.Đây là room trao đổi kinh nghiệm chứ trả lời để có bài viết thì uot chổ khác nhé.

**T4M** · 06-01-2009 22:02

Bạn sử dụng lại version v.914037 nhé.
Lỗi ở đây là máy bạn chưa BROWN.

**T4M** · 06-01-2009 22:05

Bạn làm theo trình tự nay nhé:

Code:

v0.914037

- added testpoint for db2020 phones.
  db2020 testpoint idea made by dre_ambox team. 
  as i respected that, i not included db2020 testpoint in setool2 
  for a long time. but anything ends sometime.
  now, setool2 users can enjoy gdfs db2020 gdfs repair.

  usage: 
  1. it is only and only for professionals. 
     users,advanced users, please "go away".
  2. testpoint is +3.3 voltage, connected to specific pin. 
     we suggesting to use +3.3v battery 
     (battery ground MUST be connected with phone's GROUND)
  3. go to emptyboard fill & repair.
  4. select any db2020 model.
  5. press "TP STAGE #1". read instructions and execute them.
  6. press "TP STAGE #2". read instructions and execute them.
  7. phone is BROWN now. 
  8. staying on "emptyboard fill and repair" write correct gdfs_in_ssw format.
  9. if flashing went fine, flash db2020 erom with needed CID.
  10. phone now retail and repaired. fullflash phone as usual.
  testpoint pictures (courtesy of drea_mbox team) included.
  after SETOOL2 db2020 testpoint procedure phone FULLY 
  working in "alternative security bypass" mode without ANY restrictions.

Goodluck.

**xauxilx2005** · 07-01-2009 03:58

Được post bởi t4_mobile

Bạn làm theo trình tự nay nhé:

Code:

v0.914037

- added testpoint for db2020 phones.
  db2020 testpoint idea made by dre_ambox team. 
  as i respected that, i not included db2020 testpoint in setool2 
  for a long time. but anything ends sometime.
  now, setool2 users can enjoy gdfs db2020 gdfs repair.

  usage: 
  1. it is only and only for professionals. 
     users,advanced users, please "go away".
  2. testpoint is +3.3 voltage, connected to specific pin. 
     we suggesting to use +3.3v battery 
     (battery ground MUST be connected with phone's GROUND)
  3. go to emptyboard fill & repair.
  4. select any db2020 model.
  5. press "TP STAGE #1". read instructions and execute them.
  6. press "TP STAGE #2". read instructions and execute them.
  7. phone is BROWN now. 
  8. staying on "emptyboard fill and repair" write correct gdfs_in_ssw format.
  9. if flashing went fine, flash db2020 erom with needed CID.
  10. phone now retail and repaired. fullflash phone as usual.
  testpoint pictures (courtesy of drea_mbox team) included.
  after SETOOL2 db2020 testpoint procedure phone FULLY 
  working in "alternative security bypass" mode without ANY restrictions.

Goodluck.

ok để mình làm theo cách bạn sẽ báo tin cho anh em biết

LinkBack

Công cụ

Hiển thị

K770i flash GDFS k được nhờ anh em giúp đỡ?

Thread Information

Users Browsing this Thread

Similar Threads

K770i cần giúp đỡ!!!!!!!!!!!!!!

các bác ơi giúp em kon k770i này với

w580 repair gdfs ok nhưng ko flash được

k770i liệt phím số 5 xin giúp

Xin giúp K770i đứt đường Mic

Quyền viết bài